Trabajos electronics en LutonCrear alertas

Lead Hardware Engineer \n Based in Luton \n 12-month contract \n Paying up to £70p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. \n \n Responsibilities: \n\n • Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Capture schematics and support PCB layout activities for high-speed, high-performance digital designs.\n, • Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols.\n, • Integrate FPGA, processor, software and firmware components into complete system solutions.\n, • Perform design analysis, simulation, validation and verification activities.\n, • Support hardware bring-up, debugging and root-cause investigation at board and system level.\n, • Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams.\n, • Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards.\n, • Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles.\n, • Support customer demonstrations, integration activities, acceptance testing and trials.\n\n \n Experience required: \n\n • Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries.\n, • Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent).\n, • Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers.\n, • Experience integrating hardware, firmware and software on complex embedded systems.\n, • Experience developing products to demanding EMC, EMI and environmental requirements.\n, • Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions.\n, • Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards.\n, • Experience with FPGA signal processing architecture\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Product Development Engineer \n\n • Annual Salary: £45k - £50k with up to £8k bonus\n, • Location: Luton, Bedfordshire\n, • Job Type: Full-time, Monday to Friday (Days Only)\n\n We are seeking a highly organised and proactive Product Development Engineer to join our New Product Development department. This role is ideal for someone with a disciplined, structured approach to problem-solving and a positive, can-do attitude. The successful candidate will be instrumental in driving the development of new products from concept through to volume production. The ideal candidate will have engineering qualification in mechanical or electrical engineering. \n Day-to-day of the role: \n\n • Support New Product Development (NPD) from early concept through to volume production.\n, • Experience in switch gears, sockets, manufacturing will be a strong bonus\n, • Collaborate with manufacturing partners to translate product requirements, user needs, and applicable standards into robust and manufacturable mechanical designs.\n, • Plan, coordinate, and support prototype builds and design iterations.\n, • Lead FMEA reviews with relevant operations teams and drive the implementation of resulting action plans.\n, • Work closely with Electrical and Electronics Engineering, Quality, Sourcing, and Supply Chain teams.\n, • Conduct internal product testing and coordinate external testing activities for products in development, investigating and resolving any identified issues.\n, • Define and manage product and packaging labelling and marking requirements, including packaging labels, instruction leaflets, and data sheets.\n, • Collaborate with the Quality Team to investigate product issues, report findings, and manage product improvements with partner factories.\n, • Ensure products comply with relevant BS EN safety standards and directives, including EMC, REACH & RoHS.\n, • Produce and maintain technical documentation, including product specifications, packaging specifications, instruction leaflets, and data sheets.\n, • Maintain accurate and up-to-date technical support records, including WEEE and packaging weight data.\n\n Required Skills & Qualifications: \n\n • Educated in an Engineering discipline with a Mechanical or Electrical Engineering bias.\n, • Ability to identify product features and benefits.\n, • An appreciation of manufacturing processes, product standards, and a quality approach to problem-solving.\n, • Knowledge of electrical product application and electrical installation, including work practices on building sites would be beneficial.\n, • Ideally, knowledge of British/European Standards and legislation that relates to products within the portfolio.\n, • Experience in collaborating with offshore factories remotely.\n, • Ideally, knowledge of IET Wiring Regulations.\n, • Computer literate in Microsoft Word, Excel, and PowerPoint.\n\n Benefits: \n\n • Competitive salary with a bonus potential of up to £8k.\n, • Standard working hours, Monday to Friday with no weekend shifts.\n, • Opportunities for professional growth and development within a thriving industry.\n\n To apply for the Product Development Engineer position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this role.

Principal Firmware Engineer \n Based in Luton \n 12-month contract \n Paying up to £85p/h (Inside IR35) \n \n Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance \n \n Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. \n \n Responsibilities: \n\n • Auto-generating code using model-driven engineering using MATLAB and Simulink tools\n, • Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • Derivation of detailed Firmware requirements and architecture from system requirements\n\n \n Experience required: \n\n • Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM\n, • FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel).\n, • Fast interfaces such as PCIe, Ethernet, and JESD\n, • A structured approach to firmware design (RTCA DO-254 or similar)\n, • Cryptography and anti-tamper techniques\n, • Artificial Intelligence including machine learning and genetic algorithms\n, • Electronics test methods and equipment\n, • Working in mixed discipline teams\n, • HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work.\n\n Disclaimer: \n This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Lead Hardware Engineer \n Luton | 4 Days Onsite Per Week \n 12-Month Contract \n £65 per Hour (Inside IR35) \n Active SC Clearance Required \n Winsearch is currently recruiting for a Lead Hardware Engineer to join a leading defence engineering organisation delivering advanced Electronic Warfare and Defensive Aids Systems across air, land and maritime platforms. \n This is an exciting opportunity to work on technically challenging programmes at the forefront of defence technology, developing mission-critical hardware that supports some of the world's most advanced military platforms. \n Working within a multidisciplinary engineering environment, you'll contribute throughout the entire product lifecycle, from requirements capture and architecture definition through to integration, qualification and customer acceptance. \n The Role \n As a Lead Hardware Engineer, you'll take a key role in the design and development of complex digital and mixed-signal electronics for high-performance defence applications. \n You'll work closely with systems, firmware, software and RF engineering teams to develop robust hardware solutions capable of operating in demanding environments. \n Key Responsibilities \n\n • Design and develop advanced digital and mixed-signal hardware.\n, • Define hardware architectures for FPGA, SoC and processor-based systems.\n, • Create schematics and support PCB layout activities for high-speed designs.\n, • Develop and verify interfaces including DDR memory, PCIe and Ethernet.\n, • Integrate hardware, firmware and software into complete system solutions.\n, • Perform simulation, verification and validation activities.\n, • Support board-level bring-up, debugging and fault investigation.\n, • Collaborate with cross-functional engineering teams across the product lifecycle.\n, • Support environmental, EMC and qualification testing.\n, • Produce technical documentation and engineering evidence to support programme delivery.\n, • Support customer demonstrations, trials and acceptance activities.\n\n Skills & Experience \n We're keen to hear from engineers with experience in high-speed digital electronics design gained within defence, aerospace or other highly regulated industries. \n Essential \n\n • Strong background in FPGA and SoC-based hardware architectures.\n, • Experience designing complex multilayer PCB assemblies.\n, • Knowledge of high-speed serial interfaces, processors and memory subsystems.\n, • Experience with tools such as Altium Designer, OrCAD, Xpedition or equivalent.\n, • Practical hardware debugging and fault-finding experience using industry-standard test equipment.\n, • Understanding of signal integrity, power integrity and timing considerations.\n, • Experience integrating hardware, firmware and software within embedded systems.\n, • Ability to translate system requirements into effective hardware solutions.\n, • Experience supporting verification, validation and qualification activities.\n\n Desirable \n\n • Electronic Warfare, Radar, RF, Communications or Sensor Systems experience.\n, • Safety-critical or mission-critical product development.\n, • FPGA signal processing architectures.\n, • Knowledge of aerospace and defence standards including DO-254, DEF STAN or MIL-STD.\n, • Experience leading technical reviews and mentoring engineers.\n, • Design for Manufacture, Design for Test and Design for Reliability methodologies.\n\n Requirements \n\n • Active SC Clearance.\n, • Sole British National status due to programme security requirements.\n, • Strong communication skills and the ability to work effectively within multidisciplinary teams.\n\n What's on Offer? \n\n • £65 per hour (Inside IR35)\n, • Initial 12-month contract\n, • Hybrid working with four days per week onsite in Luton\n, • Work on cutting-edge Electronic Warfare and Defence programmes\n, • Exposure to advanced technologies and complex engineering challenges\n, • Collaborative environment with experienced engineering specialists\n\n If you're looking for a contract opportunity where you can contribute to the development of next-generation defence technology, we'd love to hear from you. \n Apply today or contact Winsearch for a confidential discussion. \n INDWIN \n Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see Many Thanks

Senior Production and Manufacturing Engineer \n Location: Luton, UK \n Salary: £48,000 – £53,000k \n Benefits: Comprehensive package including performance bonus \n Contact: Adam Mayne – adam@vrl.co.uk | 01234 823373 \n \n We are seeking a talented and motivated Production & Manufacturing Engineer Team Lead to join a busy and dynamic technology company based near Luton. \n Backed by recent investment and ambitious growth plans, the business is entering an exciting new phase of expansion and is strengthening its manufacturing capability to support increasing global demand. This is an excellent opportunity to join a market-leading engineering company developing highly specialised products for customers worldwide. \n This role would suit a hands-on Manufacturing Engineer, Production Engineer, NPI Engineer or Manufacturing Process Engineer who enjoys solving problems, improving manufacturing processes and leading the introduction of new products into production. \n Working closely with Engineering and Manufacturing teams, you will play a key role in ensuring products move smoothly from design into manufacture, while driving continuous improvements in quality, efficiency and reliability. You'll have the opportunity to take ownership of projects, influence manufacturing capability and see the direct impact of your work on innovative products used around the world. \n In return, you can expect a competitive salary and benefits package, an excellent working environment and a management team committed to investing in both people and technology. \n \n Responsibilities \n\n • Own and optimise production and test processes to ensure quality, efficiency and reliability.\n, • Lead New Product Introduction (NPI) activities from design through to manufacture and ongoing support.\n, • Develop and implement work instructions and manufacturing documentation using digital platforms.\n, • Support and provide day-to-day leadership to the manufacturing team.\n, • Manage ERP and Shop Floor Data Collection systems.\n, • Work closely with Engineering to improve manufacturability, product quality and production efficiency.\n, • Liaise with suppliers and subcontract manufacturers to ensure smooth operations.\n, • Drive continuous improvement, lean manufacturing and training initiatives.\n\n \n Requirements \n\n • Experience within a Manufacturing Engineer, Production Engineer, NPI Engineer or similar role.\n, • Background in electronics, electro-mechanical or other complex manufacturing environments.\n, • Experience supporting products from development into manufacture.\n, • Experience with ERP systems and Lean/Six Sigma or Continuous Improvement methodologies.\n, • Strong problem-solving and analytical skills.\n, • Ability to take ownership, make decisions and deliver results in a fast-paced environment.\n, • Excellent communication and stakeholder management skills.\n\n \n This is a fantastic opportunity for a talented manufacturing professional to join a growing business at an exciting stage of its development and play a key role in shaping future manufacturing success

Job Title: Senior Electronics Designer \n Location: Luton, UK (Remote/Hybrid) \n Type: Permanent \n Key Responsibilities \n Full Lifecycle Design: Own hardware technical design from initial concept and architecture through to a fully manufacturable product. \n Circuit & Board Level: Execute circuit design, component selection, worst-case analysis, and simulation. \n Lab Work: Conduct board bring-up, testing, measurement,... \n \n \n ZIPC1_UKTJ

Equipment TechnicianLocation: LutonWe are seeking an experienced Equipment Technician to join a busy semiconductor manufacturing facility, supporting the maintenance, repair, and continuous improvement of wafer fabrication equipment. This is a hands-on engineering role where you'll play a key part in maximising equipment uptime, troubleshooting complex faults, and driving process reliability.Working closely with Manufacturing, Process Engineering and Equipment Engineering teams, you'll ensure critical production tools remain operational while identifying opportunities to improve performance and reduce costs.Key Responsibilities: Maintain greater than 80% uptime across key semiconductor process equipment.Diagnose and repair complex equipment faults, including PCB repair to component level .Troubleshoot electrical, electronic and mechanical issues on manufacturing tools.Support technicians and manufacturing teams with technical guidance and fault resolution.Work collaboratively with Process Engineers, Equipment Engineering and Production teams to minimise downtime.Identify and implement continuous improvement and cost reduction initiatives.Assist with planned maintenance, equipment upgrades and improvement projects.Develop and maintain maintenance procedures and technical documentation.Liaise with OEMs, subcontractors and service engineers during equipment repairs and installations.Ensure all work is carried out safely and in accordance with cleanroom and site procedures.What We're Looking For: Essential: HNC/HND (or equivalent) in Engineering, Electronics, Science, Materials Science or a related discipline.Strong fault-finding experience on complex manufacturing equipment.Ability to diagnose and repair electronic PCBs to component level .Excellent electronics knowledge with hands-on troubleshooting skills.Strong mechanical aptitude and willingness to carry out equipment maintenance and mechanical repairs.Proven problem-solving skills within a manufacturing or engineering environment.Experience documenting maintenance procedures and technical processes.Ability to work effectively with suppliers, contractors and cross-functional engineering teams.Excellent communication skills, both written and verbal.Desirable: Experience within a semiconductor wafer fabrication or cleanroom manufacturing environment.Knowledge of wafer fab process equipment.Experience supporting Epitaxy, Ion Implant or Passivation equipment.Experience with Lean Manufacturing, 6S , Kaizen or Continuous Improvement methodologies.Track record of improving equipment reliability and reducing downtime.Please get in touch with Christina McGuire to hear more!TPBN1_UKTJ

Job Title: Senior Electronics Project ManagerLocation: Luton, UK (Hybrid/Remote)Type: PermanentKey ResponsibilitiesProject Ownership: Manage end-to-end delivery from client enquiry to production.Client Management: Act as the primary technical contact to capture specs and manage scope.Technical Leadership: Direct and review the work of electronics and PCB layout engineers.Hands-On Hardware: Execute circuit design, simulation, board bring-up, and fault finding.Documentation & Testing: Author technical reports and support EMC/qualification activities.RequirementsCommercial track record of end-to-end project ownership and delivery.Experience providing technical direction to hardware/PCB engineers.Strong client-facing skills (requirements capture, technical reporting).Mixed Analogue and Digital Design with Micro-controllers.Schematic Capture (Altium and/or Cadence).Desirables:Power & Processing: SMPS design; 8/16/32/64-Bit Microprocessors.External Resource: Experience managing sub-contracted software, firmware, or mechanical design.Commercial: Consultancy/design services background.Comms Protocols: CAN, Ethernet, RS485, USB.TPBN1_UKTJ

Contract Firmware Engineer (FPGA) – Luton - 1756Location: Luton (90% onsite)Rate: £84.81/hour UmbrellaDuration: 12 monthsWe seek an engineer with recent high-integrity or safety-critical industry experience (defence, aerospace, or similar), or eligible for UK security clearance.OverviewAn opportunity for an experienced Firmware Engineer to support the development of complex FPGA-based digital systems within a multidisciplinary engineering team. The role involves designing, implementing and verifying firmware solutions for high-performance, safety-critical applications.Key ResponsibilitiesDesign, develop and verify FPGA firmware for complex digital systems.Derive firmware requirements and architectures from system-level requirements.Develop RTL using Verilog/SystemVerilog and verify designs using UVM.Work with FPGA toolchains including Xilinx and Intel (Altera) devices.Develop high-speed interface solutions (e.g. PCIe, Ethernet, JESD).Support model-based development using MATLAB/Simulink where appropriate.Collaborate closely with hardware, systems and software engineers.Contribute to design reviews, testing and documentation throughout the development lifecycle.Essential Skills & ExperienceStrong FPGA development experience across major FPGA families.Proficiency with Xilinx tools, TCL, Verilog, SystemVerilog and UVM.Experience with Xilinx 7 Series, UltraScale, Intel (Altera) or Microsemi FPGA architectures.Knowledge of high-speed interfaces such as PCIe, Ethernet and JESD.Experience deriving firmware architectures from system requirements.Familiarity with structured firmware development processes (e.g. DO-254 or equivalent).Understanding of electronics test methods and laboratory equipment.Strong communication skills and experience working within multidisciplinary teams.Desirable SkillsModel-based design using MATLAB/Simulink.Knowledge of cryptography and anti-tamper techniques.Experience applying AI/ML concepts within embedded or firmware environments.TPBN1_UKTJ

Senior Electronics Design Engineer If you're a Senior Electronics Design Engineer who still wants to be the person solving the difficult technical problems, rather than moving away from hands-on engineering, this could be a very good fit. What You'll Be Doing As a Senior Electronics Design

Principal Firmware Engineer Based in Luton 12-month contract Paying up to £85p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: As the Principal Firmware Engineer, you will work with the support of experts in their field, using world-class facilities to deliver Firmware for complex digital systems that meet challenging future customer requirements. Responsibilities: Auto-generating code using model-driven engineering using MATLAB and Simulink tools Design using tools such as Xilinx, TCL, Verilog, System Verilog, and UVM Derivation of detailed Firmware requirements and architecture from system requirements Experience required: Design tools such as Xilinx, TCL, Verilog, System Verilog, and UVM FPGA architectures such as Xilinx 7. Xilinx UltraScale; Intel (Altera) or Microsemi (Actel). Fast interfaces such as PCIe, Ethernet, and JESD A structured approach to firmware design (RTCA DO-254 or similar) Cryptography and anti-tamper techniques Artificial Intelligence including machine learning and genetic algorithms Electronics test methods and equipment Working in mixed discipline teams HNC/HND or Undergraduate Degree (Electronic Engineering, Computer Science, AI, Games Programming, Physics, or Applied Physics) or you may just have lots of skills and experience gained through your hard work....

Key Responsibilities Carry out testing, fault-finding, and validation of PCB assemblies and electronic products Perform RF testing and measurement to verify product performance against specification Support ATE-based test processes for production and product verification Diagnose

Full Lifecycle Design: Own hardware technical design from initial concept and architecture through to a fully manufacturable product.Circuit & Board Level: Execute circuit design, component selection, worst-case analysis, and simulation.Lab Work: Conduct board bring-up, testing, measurement, and fau

The Company A UK leading electronic manufacturer is seeking an experienced a Quality Inspector to join the growing team. The Candidate Experienced as a Quality Inspector within electronics Confident inspecting assembled PCB’s Able to read and follow drawings IPC-A-610 certified would be advant

Senior Electronics Design Engineer Location: Luton, Bedfordshire / Remote Hours: Monday to Friday Salary: Competitive, depending on experience We are seeking an experienced Senior Electronics Design Engineer to join an innovative electronics design and manufacturing business.This is a hands-on role

Senior Electronics Design Engineer Location: Luton, Bedfordshire / Remote Hours: Monday to Friday Salary: Competitive, depending on experience We are seeking an experienced Senior Electronics Design Engineer to join an innovative electronics design and manufacturing business. Key Responsibilitie

An exciting opportunity has arisen for a Senior Electronics Engineer with a leading technology solutions provider with established customer partnerships in a range of industry sectors. This is a largely remote based role, the Senior Electronics Engineer, Luton, Bedfordshire will be responsible for t

Senior Electronics Project Manager. Project Ownership: Manage end-to-end delivery from client enquiry to production. Commercial track record of end-to-end project ownership and delivery.

UK is seeking a Head of Engineering Capability to shape the future of engineering across the organisation.You will lead the development of engineering processes, tools and governance, enabling teams to deliver with greater efficiency, consistency and confidence within the Electronics function.The ro

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. Do you have the right skills and experience for this role Read on to find out, and make your application. BASIC SALARY: £36,000 BENEFITS: · Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. xrnqpay Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection

Lead Hardware Engineer Luton | 4 Days Onsite Per Week 12-Month Contract £65 per Hour (Inside IR35) Active SC Clearance Required Winsearch is currently recruiting for a Lead Hardware Engineer to join a leading defence engineering organisation delivering advanced Electronic Warfare and Defensive Aids Systems across air, land and maritime platforms. This is an exciting opportunity to work on technically challenging programmes at the forefront of defence technology, developing mission-critical hardware that supports some of the world's most advanced military platforms. Working within a multidisciplinary engineering environment, you'll contribute throughout the entire product lifecycle, from requirements capture and architecture definition through to integration, qualification and customer acceptance. The Role As a Lead Hardware Engineer, you'll take a key role in the design and development of complex digital and mixed-signal electronics for high-performance defence applications. You'll work closely with systems, firmware, software and RF engineering teams to develop robust hardware solutions capable of operating in demanding environments. Key Responsibilities • Design and develop advanced digital and mixed-signal hardware., • Define hardware architectures for FPGA, SoC and processor-based systems., • Create schematics and support PCB layout activities for high-speed designs., • Develop and verify interfaces including DDR memory, PCIe and Ethernet., • Integrate hardware, firmware and software into complete system solutions., • Perform simulation, verification and validation activities., • Support board-level bring-up, debugging and fault investigation., • Collaborate with cross-functional engineering teams across the product lifecycle., • Support environmental, EMC and qualification testing., • Produce technical documentation and engineering evidence to support programme delivery., • Support customer demonstrations, trials and acceptance activities. Skills & Experience We're keen to hear from engineers with experience in high-speed digital electronics design gained within defence, aerospace or other highly regulated industries. Essential • Strong background in FPGA and SoC-based hardware architectures., • Experience designing complex multilayer PCB assemblies., • Knowledge of high-speed serial interfaces, processors and memory subsystems., • Experience with tools such as Altium Designer, OrCAD, Xpedition or equivalent., • Practical hardware debugging and fault-finding experience using industry-standard test equipment., • Understanding of signal integrity, power integrity and timing considerations., • Experience integrating hardware, firmware and software within embedded systems., • Ability to translate system requirements into effective hardware solutions., • Experience supporting verification, validation and qualification activities. Desirable • Electronic Warfare, Radar, RF, Communications or Sensor Systems experience., • Safety-critical or mission-critical product development., • FPGA signal processing architectures., • Knowledge of aerospace and defence standards including DO-254, DEF STAN or MIL-STD., • Experience leading technical reviews and mentoring engineers., • Design for Manufacture, Design for Test and Design for Reliability methodologies. Requirements • Active SC Clearance., • Sole British National status due to programme security requirements., • Strong communication skills and the ability to work effectively within multidisciplinary teams. What's on Offer? • £65 per hour (Inside IR35), • Initial 12-month contract, • Hybrid working with four days per week onsite in Luton, • Work on cutting-edge Electronic Warfare and Defence programmes, • Exposure to advanced technologies and complex engineering challenges, • Collaborative environment with experienced engineering specialists If you're looking for a contract opportunity where you can contribute to the development of next-generation defence technology, we'd love to hear from you. Apply today or contact Winsearch for a confidential discussion. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https:// Many Thanks JBRP1_UKTJ

An exciting opportunity has arisen for a Senior Electronics Engineer with a leading technology solutions provider with established customer partnerships in a range of industry sectors. This is a largely remote based role, the Senior Electronics Engineer, Luton, Bedfordshire will be responsible for the development of electronic products for a variety of major OEM's in market sectors including Automotive, Clean Energy, Communication & Broadcasting, Consumer, Defence & Aerospace, Homeland Security, IP Development Platforms, Medical, Scientific Research & Space. The successful Senior Electronics Engineer, Luton, Bedfordshire will have designed products for manufacture, accustomed to working to deadlines and able to communicate with customers effectively. You will have a strong background in Mixed Analogue and Digital Design with Micro-controllers, Schematic Capture (ideally in Altium) and understand communications protocols such as CAN, Ethernet, RS485, USB, CAN / Ethernet Diagnostics. APPLY NOW for the Senior Electronics Engineer for our client based in Luton, Bedfordshire role please send your CV to or call Tom on 01582 878 848 quoting ref. THD1411, if you have any specific questions about this role, otherwise we always welcome the opportunity to discuss other Electronics jobs. TPBN1_UKTJ

Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience deliv

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Junior Hardware Engineer Reporting To: Manager, Engineering Work Schedule: Onsite Luton, GBR Join us at the forefront of radar innovation. We're looking for a Junior Hardware Engineer to help develop advanced 79GHz and 94GHz radar systems used for Foreign Object Debris (FOD) detection in airport environments. This is an exciting opportunity to work alongside experienced engineers on cutting-edge RF, mmWave, and digital hardware from design through to deployment. What You'll Do Support the design, prototyping and testing of RF, mmWave and mixed-signal hardware. Perform lab validation using VNAs, spectrum analysers, oscilloscopes and other test equipment. Assist with antenna integration, performance testing and troubleshooting. Support FCC/CE compliance and certification activities. Develop test fixtures, procedures and simple automation tools using Python or MATLAB. Contribute to product improvements, manufacturing transfer and field trials. What We're Looking For Degree, HNC/HND, BTEC or equivalent in Electronics, Electrical Engineering or a related field. Knowledge of RF fundamentals and electronic hardware design. Hands-on laboratory experience from projects, internships or industry. Strong problem-solving skills and attention to detail. A collaborative mindset and eagerness to learn new technologies If you're passionate about hardware engineering and ready to build the next generation of radar systems, we'd love to hear from you. Why Join Moog? This is an opportunity to become part of a business that is continuing to grow and invest in its people, technology and future. At Moog, you'll find: A culture built on trust, collaboration and innovation Long-term career development opportunities 33 days annual leave (including Bank Holidays) Competitive pension contribution starting at 6% Life assurance cover Employee share scheme Flexible benefits package A supportive environment where your ideas and contributions matter You Matter at Moog We believe our people are our greatest strength. Moog is committed to creating an inclusive workplace where everyone feels respected, valued and empowered to bring their authentic selves to work. We know that diverse perspectives create better solutions, stronger teams and greater innovation. Our commitment to our employees is simple: if we take care of our people, they will continue to deliver exceptional outcomes for our customers, colleagues and communities. Security Clearance This role requires Baseline Personnel Security Standard (BPSS) clearance and successful candidates must be eligible to obtain and maintain this clearance. If clearance cannot be obtained, any offer of employment may be withdrawn on national security grounds. TPBN1_UKTJ

Strong structured approach to electronics design. We are currently recruiting for an experienced Senior Electronics Design Engineer to join an established engineering and technology business delivering bespoke electronic solutions for a range of OEM customers. Commercial electronics design experienc

Lutron Electronics is an Equal Opportunity – Affirmative Action – Employer.

Assist with providing advice and support on Quality Assurance and Quality Control activities. Further education or experience in Engineering, Quality, Manufacturing, Defence Electronics, or other similarly complex industries is preferred. We’re offering an exciting opportunity to join us as a Qual

Experience within a field service environment in a directly applicable industry. Engineering graduate or military training in electronics engineering technology (highly desirable). Field Service Technician – Home based, covering London airports predominantly.

TRS Consulting in the United Kingdom is recruiting a Field Service Engineer for MRI medical imaging. The ideal candidate has field service or technical support experience in medical imaging, strong MRI repair skills, ONC or HNC in electronics, and excellent customer-facing manner.

As the Campaign Manager you will be responsible for the strategic growth of support contracts across the Electronics Division managing complex, high-value business winning opportunities. To win profitable business you will have broad exposure to the business, leading Integrated Campaign Teams in a f

Leonardo is seeking a Quality Improvement Lead for the exciting GCAP Electronics Evolution Consortium project at its Reading site, initially based in Luton. The role involves driving quality improvement activities and collaborating across international teams to enhance quality monitoring through adv

Lutron Electronics in Dunstable is seeking a detail‑driven Logistics Coordinator to ensure the seamless flow of goods across our global supply chain. The ideal candidate will possess a Bachelor's degree in a related field and have 2–4 years of experience in logistics.

Further education and/or experience in Engineering, Quality, Manufacturing, or a similar discipline within Defence Electronics or a comparably complex industry. Interface with internal stakeholders (Engineering, Supply Chain, and Operations) and external suppliers. Ensure compliance with AS9100, Qua

They are now looking for a Channel Manager to join their Electronics Division covering the Northern Europe This is an exciting opportunity to join the business and support the development of customer relationships and market understanding with some of North Europe's leading Electronic component and

Electronics Field Service Engineer (007lw) – Watford & Luton - £41,000 + Overtime + BenefitsWe’re recruiting a Field Service Engineer for a leading technology company specialising in life-saving safety systems that has a fantastic work culture. Full product training is provided – what matters

Role: Electronics EngineerLocation: Luton + Hybrid Work from HomeSalary: Up to £65,000KO2 is partnering with an established and innovative technology company based in Luton, who are looking to expand their engineering team with an experienced Electronics Engineer. The RoleAs an Electronics Engineer

Lead Hardware Engineer Luton | 4 Days Onsite Per Week 12-Month Contract £65 per Hour (Inside IR35) Active SC Clearance Required Winsearch is currently recruiting for a Lead Hardware Engineer to join a leading defence engineering organisation delivering advanced Electronic Warfare and Defensive Aids Systems across air, land and maritime platforms. This is an exciting opportunity to work on technically challenging programmes at the forefront of defence technology, developing mission-critical hardware that supports some of the world's most advanced military platforms. Working within a multidisciplinary engineering environment, you'll contribute throughout the entire product lifecycle, from requirements capture and architecture definition through to integration, qualification and customer acceptance. The Role As a Lead Hardware Engineer, you'll take a key role in the design and development of complex digital and mixed-signal electronics for high-performance defence applications. You'll work closely with systems, firmware, software and RF engineering teams to develop robust hardware solutions capable of operating in demanding environments. Key Responsibilities Design and develop advanced digital and mixed-signal hardware. Define hardware architectures for FPGA, SoC and processor-based systems. Create schematics and support PCB layout activities for high-speed designs. Develop and verify interfaces including DDR memory, PCIe and Ethernet. Integrate hardware, firmware and software into complete system solutions. Perform simulation, verification and validation activities. Support board-level bring-up, debugging and fault investigation. Collaborate with cross-functional engineering teams across the product lifecycle. Support environmental, EMC and qualification testing. Produce technical documentation and engineering evidence to support programme delivery. Support customer demonstrations, trials and acceptance activities. Skills & Experience We're keen to hear from engineers with experience in high-speed digital electronics design gained within defence, aerospace or other highly regulated industries. Essential Strong background in FPGA and SoC-based hardware architectures. Experience designing complex multilayer PCB assemblies. Knowledge of high-speed serial interfaces, processors and memory subsystems. Experience with tools such as Altium Designer, OrCAD, Xpedition or equivalent. Practical hardware debugging and fault-finding experience using industry-standard test equipment. Understanding of signal integrity, power integrity and timing considerations. Experience integrating hardware, firmware and software within embedded systems. Ability to translate system requirements into effective hardware solutions. Experience supporting verification, validation and qualification activities. Desirable Electronic Warfare, Radar, RF, Communications or Sensor Systems experience. Safety-critical or mission-critical product development. FPGA signal processing architectures. Knowledge of aerospace and defence standards including DO-254, DEF STAN or MIL-STD. Experience leading technical reviews and mentoring engineers. Design for Manufacture, Design for Test and Design for Reliability methodologies. Requirements Active SC Clearance. Sole British National status due to programme security requirements. Strong communication skills and the ability to work effectively within multidisciplinary teams. What's on Offer? £65 per hour (Inside IR35) Initial 12-month contract Hybrid working with four days per week onsite in Luton Work on cutting-edge Electronic Warfare and Defence programmes Exposure to advanced technologies and complex engineering challenges Collaborative environment with experienced engineering specialists If you're looking for a contract opportunity where you can contribute to the development of next-generation defence technology, we'd love to hear from you. Apply today or contact Winsearch for a confidential discussion. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Quality Engineer Luton 6-Month Contract Paying up to £37p/h (Inside IR35) Key Responsibilities Act as the Quality focal point for in-service and returns material activities Support investigation and resolution of non-conformances, including root cause analysis and corrective actions Review and approve quality documentation related to returns, concessions, and repair activities Ensure effective traceability and configuration control of returned and unserviceable items Interface with internal stakeholders (Engineering, Supply Chain, and Operations) and external suppliers Ensure compliance with AS9100, Quality Management System, and customer contractual requirements Contribute to continuous improvement activities across in-service quality processes Deliver compliant products in a timely manner, meeting all cost and safety requirements Provide reports and supporting data to the Programme, Project, and functional teams Required Experience Further education and/or experience in Engineering, Quality, Manufacturing, or a similar discipline within Defence Electronics or a comparably complex industry Demonstrated knowledge of AS9100 / ISO9001 and Continuous Improvement principles Experience with Quality tools such as Root Cause Corrective Action, Pattern Fault Lifecycle, Verification, etc. Logical thinker, capable of turning complex data into practical, actionable solutions aligned with business goals Strong interpersonal skills with a collaborative working style across all functions Excellent analytical skills and attention to detail Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Job Title: FM Bid Manager Location: Luton Salary: £60k - £65k + Bonus/Commission Competitive Hours: Full Time The Bid Manager is responsible for supporting bid strategy, processes and team activity to secure new business and retain existing contracts through high-quality, winning tender submissions. Working on behalf of a leading Facilities Management services provider, the role will focus on opportunities across Facilities Management, Security, Cleaning and Events sectors. The successful candidate will manage the full bid lifecycle from opportunity identification through to submission and post-bid review, while developing compelling win strategies, leading a high-performing team and driving continuous improvement across the bid function. Key Responsibilities – Bid Manager Bid Strategy & Business Development Develop and implement bid strategies aligned with business objectives, sector priorities and growth plans. Proactively identify and shape opportunities across Facilities Management, Security, Cleaning and Events sectors. Partner with Commercial, Operations and Executive Leadership teams to develop growth strategies and market positioning. Lead bid/no-bid decision-making processes, ensuring focus on opportunities with the highest probability of success. Support business development activities through market intelligence, competitor analysis and customer insight. Contribute to long-term business planning through pipeline analysis and opportunity forecasting. Manage the full bid lifecycle from qualification through to submission and post-bid review. Lead bid kick-off meetings, strategy reviews, executive reviews and submission sign-off processes. Ensure all submissions meet company standards for compliance, quality and commercial robustness. Develop compelling win strategies and customer-focused value propositions. Ensure bid responses clearly differentiate the business from competitors. Challenge and improve submission quality through robust review processes. Lead, manage and develop the bid management team to create a high-performance culture. Establish clear objectives, development plans and succession planning initiatives. Promote accountability, quality and continuous improvement across the team. Provide coaching, support and development opportunities to team members. Commercial Management Work closely with Finance and Commercial teams to develop competitive and profitable solutions. Review pricing strategies and commercial proposals to ensure alignment with win strategies and customer expectations. Evaluate commercial risks and contractual implications throughout the bid process. Ensure commercial solutions balance profitability with customer requirements. Stakeholder Management Establish strong relationships with senior leaders across Operations, Finance, HR, Commercial and Marketing functions. Build credibility and trust with customers, procurement stakeholders and key decision-makers. Facilitate effective collaboration across departments to ensure successful bid delivery. Take ownership of key bid function performance metrics and reporting. Systems & Continuous Improvement Lead the ongoing development of CRM, bid management and content management systems. Maintain a robust bid knowledge library, case study repository and content management framework. Identify opportunities to improve bid quality, efficiency and win rates. Support continuous improvement initiatives and best practice across the bid function. Qualifications & Experience – Bid Manager Experience in bid, tender or proposal management. Experience in a senior management role leading teams and influencing stakeholders at a senior level. Proven leadership of a complex bid or tender function within a multi-sector or B2B environment. Strong commercial acumen with experience influencing pricing strategies and contractual terms. Demonstrable track record of improving win rates and bid performance. Experience using CRM and bid management systems, ideally Salesforce. Ability to balance strategic thinking with delivery in a high-volume, fast-paced environment. Excellent communication and influencing skills across technical, operational and commercial audiences. Experience within Facilities Management, Security, Cleaning or related service sectors. (desirable) For further details, please contact Kieren Provis – (phone number removed) or email your CV to (url removed) Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

The Role We are currently recruiting for an experienced Senior Electronics Design Engineer to join an established engineering and technology business delivering bespoke electronic solutions for a range of OEM customers. This is a hands-on design position focused on technically challenging hardware projects. The successful candidate will take ownership of designs from initial concept through to a proven, manufacturable product, working alongside multidisciplinary engineering teams. The role will cover the full product lifecycle, including requirements, architecture, circuit design, PCB development, testing, validation and production. This is an ideal opportunity for an engineer who wants to remain technically hands-on, rather than move into a predominantly management-focused position. Key Responsibilities • Own hardware designs from concept through to production, • Interpret customer requirements & specifications, • Carry out circuit design & component selection, • Complete worst-case analysis & simulation, • Work closely with PCB layout engineers, • Carry out board bring-up, testing & fault finding, • Design for manufacture, test & compliance, • Support EMC, safety & qualification testing, • Produce technical documentation, specifications & test plans, • Lead and participate in design reviews, • Provide technical input for quotations & proposals, • Attend customer technical discussions, • Identify and communicate technical risks, • Provide technical support and mentor less experienced engineers Key Skills & Experience Essential: Commercial electronics design experience Proven designs taken from concept to production Strong analogue & digital electronics experience Experience with microcontrollers Schematic capture – Altium Strong structured approach to electronics design Confident with laboratory testing, measurement & fault finding Experience working with PCB layout engineers Strong technical writing & documentation skills Experience with FMEA & structured problem solving Experience with approvals & validation Ability to manage project timings Able to work autonomously Eligible to obtain and hold UK Security Clearance (SC) Full UK driving licence Desirable Skills Switched Mode Power Supply design Experience with 8, 16, 32 & 64-bit microprocessors EMC testing & design Programming experience or awareness Version control CAN, Ethernet, RS485 & USB CAN/Ethernet diagnostics Experience working across multiple clients/projects Signal Integrity & Power Integrity knowledge Experience designing to recognised standards/regulations Experience mentoring junior engineers Current or previous UK Security Clearance The Package Competitive salary 25 days' holiday + bank holidays Hybrid/remote working Company pension Free parking Private healthcare following successful probation Life insurance

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. BASIC SALARY: £36,000 BENEFITS: · Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection

Electro Mechanical Assembler Luton 4 months rolling contract - start ASAP £15.00 per hour (PAYE) / £20.00 per hour (Ltd) We are currently seeking an experienced Electro-Mechanical Assembler to join a busy production team. Key Responsibilities as an Electro Mechanical Assembler Interpret engineering drawings, wiring diagrams and electronic schematics Assemble components and sub-assemblies in line with defined specifications Complete wiring and cable assembly work to a high standard Use hand tools, soldering equipment and general production tooling Ensure all work meets required quality and production standardsSkills & Experience Required as an Electro Mechanical Assembler Proven experience in an electronics or electro-mechanical assembly environment Strong soldering skills Previous experience with wiring and cable assemblies Familiarity with IPC standards or previous IPC training is highly advantageous Competent in using hand tools, soldering equipment and general production tooling Confident reading and interpreting technical drawings and circuit diagramsIf this Electro Mechanical Assembler role would be of interest, please apply now or contact Molly Brooks at ProTech Recruitment

Senior Electronics Design Engineer Location: Luton, Bedfordshire / Remote Hours: Monday to Friday Salary: Competitive, depending on experience We are seeking an experienced Senior Electronics Design Engineer to join an innovative electronics design and manufacturing business. This is a hands-on role, designing complex hardware solutions for major OEM customers across sectors including Automotive, Defence & Aerospace, Medical, Communications, Clean Energy and Space. The successful candidate will take ownership of designs from concept through to production, working closely with multidisciplinary engineering teams and customers. Key Responsibilities Design electronic hardware from concept through to production Circuit design, component selection, simulation and analysis Work with PCB layout engineers and review layouts Board bring-up, testing, measurement and fault finding Support EMC, validation, compliance and qualification Produce technical specifications, reports and test documentation Participate in design reviews and customer meetings Identify technical risks and manage project timescales Provide technical support and mentoring to other engineersSkills & Experience Required Strong commercial experience in electronics hardware design Proven experience taking designs from concept through to production Mixed analogue and digital design with microcontrollers Schematic capture experience, ideally Altium Confident working in a laboratory environment Experience with PCB layout and design constraints Strong analytical, problem-solving and technical writing skills Experience with FMEA, validation and approvals Able to work independently with minimal supervision Eligible to obtain UK Security Clearance (SC) Full UK driving licenceDesirable Switched Mode Power Supply Design EMC experience CAN, Ethernet, RS485 and USB Signal and Power Integrity Embedded programming awareness Experience working across multiple clients/projects Previous UK Security ClearanceWhat's on offer Competitive salary 25 days' holiday plus bank holidays Hybrid / remote working Company pension Free parking BUPA healthcare after probation Life InsuranceApply now or contact Mia Gandolfo at ProTech Recruitment in Hemel Hempstead

We’re looking for an experienced and detail-focused PCB Inspector to join our team in Bedford. This is an excellent opportunity for someone with a strong eye for detail and a background in electronics manufacturing, PCB inspection or quality control. The Role As a PCB Inspector, you’ll be responsible for inspecting assembled printed circuit boards to ensure they meet our quality standards and customer requirements. You’ll identify defects, carry out visual and technical inspections, and work closely with production and engineering teams to resolve quality issues. Key Responsibilities • Inspect PCBs and electronic assemblies for defects and workmanship standards., • Carry out visual inspection of components, solder joints and assemblies., • Identify and document faults, defects and non-conformances., • Work from drawings, specifications and inspection criteria., • Use appropriate inspection equipment and tools., • Liaise with production and engineering teams to investigate and resolve issues., • Maintain accurate inspection and quality records., • Ensure products meet required quality and industry standards., • Support continuous improvement and quality initiatives. About You We’re looking for someone who is: • Experienced in PCB inspection, electronics manufacturing or a similar quality role., • Ideally certified to IPC standard in the past, or have had expose to IPC Class 1, 2 and 3 standards, • Highly detail-oriented with excellent attention to quality., • Comfortable working from technical drawings and specifications., • Able to identify soldering, component placement and assembly defects., • Methodical, reliable and organised. What We Can Offer • Annual salary of up to £32,000pa, • Stable opportunity within an established manufacturing environment, • Opportunities to develop your technical and quality skills, • Supportive team environment If you’re an experienced PCB Inspector who takes pride in getting the detail right, we’d love to hear from you

Lead Hardware Engineer Based in Luton 12-month contract Paying up to £70p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to already hold or be eligible to obtain a high level of UK Security Clearance Overview: Required to solve complex technical challenges involving high-speed digital design, FPGA-based architectures, signal processing, hardware integration and system qualification within a highly regulated defence environment. Responsibilities: Design and develop complex digital and mixed-signal hardware solutions for defence and aerospace applications. Define hardware architectures for FPGA, SoC and processor-based systems. Capture schematics and support PCB layout activities for high-speed, high-performance digital designs. Design and verify high-speed interfaces including DDR memory, PCIe, Ethernet and similar protocols. Integrate FPGA, processor, software and firmware components into complete system solutions. Perform design analysis, simulation, validation and verification activities. Support hardware bring-up, debugging and root-cause investigation at board and system level. Work closely with Systems, Firmware, Software, RF, Mechanical and Production Engineering teams. Support environmental, EMC/EMI and qualification testing in accordance with defence and aerospace standards. Produce technical documentation, design evidence and progress reporting in accordance with structured engineering lifecycles. Support customer demonstrations, integration activities, acceptance testing and trials. Experience required: Proven experience designing high-speed digital electronics within aerospace, defence or other safety/mission-critical industries. Strong background in FPGA and SoC-based hardware architectures (Xilinx, AMD, Intel/Altera or equivalent). Practical board-level debugging using oscilloscopes, logic analysers, spectrum analysers and protocol analysers. Experience integrating hardware, firmware and software on complex embedded systems. Experience developing products to demanding EMC, EMI and environmental requirements. Experience designing complex multilayer PCBs incorporating: High-speed serial interfaces; High-performance processors; DDR memory subsystems & FPGA-based signal processing solutions. Knowledge of DO-254, DEF STAN, MIL-STD or equivalent aerospace and defence standards. Experience with FPGA signal processing architecture Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Experience in electronics manufacturing, ideally within production testing, inspection, or quality.

Are you a Production Manager or similar, coming from a background within Electronics, looking to join a company taking the defence systems sector by storm at the forefront of innovation within the electronics manufacturing?. Electronics/Aerospace/Defence). This role would suit a Production Manager o

Electronics Design Engineer Job Description:. World Class Defence Organisation based in Stevenage (the role can be a split of working Onsite and Working From Home) is currently looking to recruit a number of Electronics Design Engineer subcontractors on an initial 12 month contract.