Trabajos control engineer en LutonCrear alertas

Your Impact As a Quality Engineer, you will work as part of an Integrated Project Team (IPT), collaborating across Operations, Engineering, and other key functions to:Provide guidance and support on all Quality Assurance and Quality Control matters. Help drive achievement of Leonardo Production Syst

HV Test EngineerLocation: LutonSalary: £40,000 - £45,000 BenefitsWorking Hours: 37 Hours Monday to Friday with optional Start/Finish timesMonday Thursday (06:00 14:15 or 07:00 15:15 or 08:00 16:30)Friday (06:00 12:00 or 07.00 13.00 or 08:00 14:00)Reports To: Test ManagerWe are seeking an experienced HV Test Engineer to join our growing engineering team. This is a hands-on HV Test Engineer position at the forefront of testing innovation, responsible for performing acceptance testing and reporting on electrical units in line with quality procedures and engineering requirements.Working closely with Electrical, Hydraulic, Quality and Production teams, you will ensure test plans, quality standards and safety requirements are consistently achieved while supporting both current operations and future testing capabilities.The RoleAs a HV Test Engineer, you will be responsible for carrying out acceptance testing of large-scale electrical equipment, monitoring and reporting test results, maintaining test systems and supporting continuous improvement initiatives within a safety-critical environment.Key Responsibilities of the HV Test EngineerTesting & Technical DeliveryPerform acceptance testing on industrial motors up to 13.8kV and 3.2MW.Accurately monitor, record and report test data in line with defined test plans and engineering standards.Complete and log test reports within engineering systems upon test completion.Investigate and support the development of test data acquisition and control systems.Health, Safety & QualityMaintain the highest standards of Health & Safety, ensuring compliance with procedures and safe working practices.Ensure all test equipment is operational, maintained and correctly calibrated.Work strictly to procedures and quality plans to ensure product integrity and compliance.Collaboration & Continuous ImprovementCoordinate with Production teams to support testing schedules for new units, repairs and spares.Participate actively in LEAN and continuous improvement activities, including 5S and structured problem-solving initiatives.Maintain high standards of housekeeping within the test environment.Identify opportunities to improve testing efficiency, quality and safety.What We Are Looking ForEssential RequirementsLevel 4/5 (NQF) qualification in Electrical Engineering or a related discipline.High voltage awareness and practical experience working with high-voltage equipment.Experience with large-scale test setups and power systems.Experience working with data acquisition systems, test procedures and quality plans.Strong understanding of Health & Safety requirements within an engineering environment.Flexible, proactive approach with a positive, can-do attitude.Desirable RequirementsKnowledge of IEC and ISO testing standards, including IEC 60034 and ISO 9906.Experience carrying out dielectric and performance testing.Hydraulics and/or Variable Speed Drive (VSD) experience.Experience with automated test control systems or LabVIEW.Experience working within clean or controlled test environments.Important Health & Safety RequirementDue to the safety-critical nature of this position, any offer of employment will be subject to the successful completion of an occupational health assessment. This assessment will confirm fitness to work safely within a high-risk environment that includes exposure to high-voltage testing and will be conducted in accordance with applicable health and safety legislation and company requirements.EligibilityAll candidates must be able to demonstrate their right to work in the UK.Ready to join a world-class engineering business? Apply today and help drive innovation in high-voltage testing and electrical engineering excellence.INDMANTPBN1_UKTJ

Quality EngineerLocation: DunstableSalary: £40,000 - £45,000Job Type: Permanent, Full-TimeWe are looking for an experienced Quality Engineer to join a Quality Assurance team within a busy industrial manufacturing environment.This is a hands-on Quality Engineer role supporting Production, Engineering and Manufacturing teams to maintain and continuously improve product quality, reliability and compliance. You will play a key role in ensuring components, sub-assemblies and finished products meet the required standards, while helping to prevent quality issues from progressing through the manufacturing process or reaching the customer.Key Responsibilities as a Quality EngineerSupport Production and Engineering teams with quality-related issues, investigations and improvement activities.Lead and support root cause investigations and corrective actions using tools such as 8D, Ishikawa, FMEA and Control Plans.Create, execute, review and report on product and process qualification testing.Monitor incoming and outgoing quality and identify opportunities for improvement.Raise and manage quality notifications/alerts when non-conformances are identified.Participate in the Material Review Board (MRB) process.Support fault finding and investigation of customer returns, working closely with Production, Engineering and R&D.Review and approve small process deviations and product concessions, ensuring these are appropriately documented.Review verification and validation activities for existing and new processes.Support continuous improvement initiatives to improve product quality and manufacturing processes.About You as a Quality EngineerA degree in Electrical or Mechanical Engineering , or equivalent relevant experience.Experience within aerospace, automotive or another highly regulated manufacturing environment would be advantageous.Practical engineering knowledge and a strong understanding of manufacturing processes.Experience using quality tools such as 8D, FMEA, Control Plans and Ishikawa/root cause analysis .Excellent communication and interpersonal skills, with the ability to work effectively with Production, Engineering, Sales, customers and suppliers .A proactive approach, with the confidence to identify issues, investigate root causes and drive improvements through to completion.The RoleThis is an excellent opportunity for a Quality Engineer to join a quality-focused manufacturing environment and have genuine influence over quality, manufacturing processes, compliance and continuous improvement .If you're a Quality Engineer looking for a hands-on role where you can make a tangible difference to manufacturing quality, we'd love to hear from you.TPBN1_UKTJ

Company description:Fantastic challenges. Amazing opportunities.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career.Job description:Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines.As part of the Manufacturing Engineering team, the Senior Manufacturing Engineer will report directly to the Manufacturing Engineering Manager, with day-to-day guidance and support provided by the ME Team Leader. Based at our Luton site and supporting Defence business lines, there may occasionally be a need to travel to equipment supplier locations. The Senior Manufacturing Engineer will join a team focused on either Jet Canopies or Helicopters, contributing to the development of manufacturing processes as well as supporting daily operational activities.Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday, earlier finish on Friday to start the weekend.Job Responsibilities Local project technical lead for the implementation of production planning, from original concept through to production.Design high capability manufacturing processes using GKNs Zero Defect Manufacturing (ZDM) tool suite, (APQP Core Tools).Develop, document and optimise manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and Process SpecificationsCreate and update engineering documentation, manage point of introduction activities.Lead structured improvement activities to reduce process driven scrap and reworkProvide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answeredMake presentations at senior level internally and externally demonstrating ability to clearly communicate to the audienceIdentify, anticipate and offer solutions to technical problemsEstablish & improve production process controlsComply with company Environmental, Health, Safety and Energy procedures.Profile description:To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes:Essential:Minimum HND qualification (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/AerospaceDemonstrable Manufacturing Engineering experience gained from ideally the Aerospace, Automotive, Yellow Goods industry6Sigma Greenbelt qualificationExperience in APQP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process CapabilityExperience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniquesDemonstrable experience of practical problem-solving techniques using A3 or 8DDesirable:Experience Leading Lean Manufacturing including process standardisation kaizen activities such as 5SExperience in lay-up processes for composite materialsSpecification interpretation experienceWe are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Senior Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in their approach. The successful person will have a hands-on, creative approach to collaborate with multiple departments to improve manufacturing processes.Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role.The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we will assess each case individually)We offer:Once youre on board youll get the following perks and benefits:Competitive salary dependent on experienceThe opportunity to earn up to 15% bonusIndustry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basisLife Assurance 8 x salary185 hours holiday + bank holidaysIncome protectionShopping discountsCycle To Work SchemeEmployee Assistance ProgrammeVirtual GP Clinic for you and immediate familyElectric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included)Free onsite parkingLocal gym discountFree airport parkingDiscount with local nursery and preschool childcare settingEnhanced family friendly leaveA collaborative, dynamic working environmentAs well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you!Join us and keep the world moving click on the link below to applyA Great Place to work needs a Great Way of WorkingEveryone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?TPBN1_UKTJ

Planning Engineer – MRO – Aviation £55,000 - £60,000 (including shift) 5-5-4 (Days) - Flexible Shift Times Luton Permanent Client Overview: The client is a leading MRO for commercial aircraft, who have stations across the UK and internationally. Across the network they support A320, A330, A350, B737, B777 & B787. Role Overview: The Planning Engineer shall generate and control aircraft maintenance work packages, ensuring regulatory compliance at all times throughout the company.

Who We Are? ITC Infotech is a leading global technology services and solutions provider, led by Business and Technology Consulting. ITC Infotech provides business-friendly solutions to help clients succeed and be future-ready, by seamlessly bringing together digital expertise, strong industry specific alliances and the unique ability to leverage deep domain expertise from ITC Group businesses. The company provides technology solutions and services to enterprises across industries such as Banking & Financial Services, Healthcare, Manufacturing, Consumer Goods, Travel and Hospitality, through a combination of traditional and newer business models, as a long-term sustainable partner. What we are looking for? The IAM Technical Engineer will play a key role in supporting the ongoing RFP, product selection, proof of concepts, solution implementation and migration to the new IAM platform. Working closely with Platform Engineering, Security, Infrastructure, Architecture and delivery partners, the role will help design, implement and support a scalable, secure and automated identity ecosystem across enterprise estate. Key Responsibilities • Migration Experience: Migration to CyberArk (acquired by Palo Alto), Saviynt, Okta, Microsoft, Sailpoint Identity Stack., • Support technical evaluation of IAM vendors during the RFP and PoC phases., • Design, configure and support Identity Governance, Identity Lifecycle and Access Management capabilities., • Deliver Joiner-Mover-Leaver (JML), Role-Based Access Control (RBAC), Access Requests, Approval Workflows, Access Reviews and Segregation of Duties (SoD)., • Implement and support Privileged Access Management (PAM), credential vaulting, privileged session management and secrets management., • Integrate enterprise applications using REST APIs, SCIM, SAML, OAuth2, OpenID Connect and LDAP., • Support migration from Microsoft Identity Manager (MIM) to the selected IAM platform., • Develop automation for identity provisioning, de-provisioning and access governance., • Produce technical documentation, implementation standards and operational procedures., • Provide 3rd line support and continual improvement of the IAM platform. Required Skills & Experience • 5+ years' experience delivering enterprise Identity & Access Management solutions., • Hands-on experience with SailPoint Identity Security Cloud / IdentityIQ or Saviynt Enterprise Identity Cloud., • Strong understanding of Identity Governance & Administration (IGA), Identity Lifecycle Management, RBAC, ABAC, Access Certification and SoD., • Experience integrating enterprise applications using REST APIs, SCIM, SAML, OAuth2/OIDC and LDAP., • Experience working with Active Directory and Microsoft Entra ID in hybrid environments., • Experience supporting enterprise IAM migrations and transformation programmes., • Strong troubleshooting, stakeholder management and technical documentation skills. Our X-Factor • Work ethic: You are a consummate professional., • Aptitude: You have an innate capacity to transition from project to project without skipping a beat., • Communication: You have excellent written and verbal communication skills for coordination across projects and teams., • Impact: You are a critical thinker with an emphasis on creativity and innovation., • Passion: You have the drive to succeed paired with a continuous hunger to learn., • Leadership: You are trusted, empathetic, accountable, and empower others around you.

Field Service Engineer (Packaging Machinery) £40,000 - £47,000 + Training + Progression + Company Vehicle + Fuel Coverage + Personal Use + 25 Days Holiday + Bank Holidays + Life Insurance *Full Manufacturer Training in Italy* Luton Are you a Field Service Engineer, with a mechanical and electrical background, looking to join a growing manufacturer of specialist packaging machinery? On offer is the opportunity to join a UK market-leading supplier of liquid filling and capping machinery. The company designs, manufactures, installs and supports packaging equipment for the cosmetic, personal Care, pharmaceutical and healthcare industries. You will provide installation, servicing, maintenance and breakdown support on specialist packaging machinery at customer sites across the UK. Occasionally, you will travel to machine suppliers over in Italy. The role will involve diagnosing mechanical, electrical, pneumatic and control-system faults, as well as installing, commissioning and upgrading equipment. This role would suit a multi-skilled Field Service Engineer looking for long-term career development within a specialist engineering environment. The Role Carry out planned preventative maintenance, servicing and repairs on packaging machinery Diagnose and fault-find mechanical, electrical, pneumatic and control-system issues Install, commission and set up new packaging machinery Attending customer sites across the UK, with 1-2 nights away per week and occasional travel to Italy Complete service reports, maintenance records and testing documentation Monday to Friday The Person Experience working as Field Service Engineer Qualification in Mechanical or Electrical Engineering Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26905 Keywords: Service Engineer, Field Service Engineer, Packaging Machinery, Filling Machinery, Capping Machinery, Mechanical Engineering, Electrical Engineering, Fault Finding, Preventative Maintenance, PPM, Breakdown Support, Installation, Commissioning, Machinery Upgrades, Machinery Refurbishment, Pneumatics, Control Systems, Process Machinery, Packaging Equipment, Customer Service, Technical Support, Operator Training, Service Reports, UK Travel, Full UK Driving Licence We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

As one of our Gas Engineers, you’ll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer:. As an AO Gas Engineer, you’ll head out on the road with one of our drivers, visitin

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. You may have budget accountability for a Work Stream or Work Package Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s) Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s) Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s) Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development. Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning. Experience managing deployed resources (people you lead but you are not their line manager). Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: A higher degree qualification such as a Masters, PhD or EngD General awareness of budget and schedule management. An awareness of aerospace certification requirements. Experience of the Systems Development Lifecycle process You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Fuel your future with AO – and unlock serious earning potential. We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It's everything you need to power your career forward, with a team that's got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You'll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years' experience in gas installations It'd be great if you also have: Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed) Our Benefits: What's in it for you At AO, we've designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year. A company van with fuel paid for, so you're ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that's not all — there's plenty more to discover when you join the team Click ‘Apply' now to join our family and find out more about the Gas Installations Engineer role. TPBN1_UKTJ

Fuel your future with AO – and unlock serious earning potential. We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It's everything you need to power your career forward, with a team that's got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You'll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years' experience in gas installations It'd be great if you also have: Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed) Our Benefits: What's in it for you At AO, we've designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year. A company van with fuel paid for, so you're ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that's not all — there's plenty more to discover when you join the team Click ‘Apply' now to join our family and find out more about the Gas Installations Engineer role. TPBN1_UKTJ

Fire & Security Engineer Salary: £21£24 per hour, equivalent to £42,680£49,920 per annum Location: Milton Keynes / M1 Corridor covering Northampton, Luton, Hertfordshire, Bedford and surrounding areas Type of work and hours: Permanent, full-time, field-based role, Monday to Friday. Travel paid after the first 30 minutes each way. Overtime available at enhanced rates. Are you an experienced Fire & Security Engineer looking for a varied field-based role covering commercial, education and infrastructure sites across the M1 corridor? Our client is looking to recruit a skilled Fire & Security Engineer to join their established engineering team, supporting service, maintenance, fault-finding, repairs, small works and installation activity across a range of fire and security systems. This is a permanent opportunity offering strong earning potential, overtime, paid travel, a company van, healthcare and ongoing technical development. The priority for this role is strong security systems experience, particularly IP CCTV, intruder alarms and door entry/access control systems. Applicants will also need practical experience working with fire alarm systems, with the ability to fault-find, maintain and carry out repairs to a good technical standard. The role would suit an engineer who is confident working independently, comfortable liaising with customers on site and able to manage a varied workload across multiple locations. Job Description Duties will include: Carrying out service, maintenance, fault-finding, repairs and small works across fire and security systems Working on CCTV systems, including IP and analogue systems, as well as intruder alarms, access control and door entry systems Maintaining and repairing fire alarm systems across commercial, education and other client sites Diagnosing faults across panels, circuits, devices and associated components, ensuring issues are resolved efficiently and safely Liaising with clients and site contacts when arranging, attending and completing works Completing risk assessments, method statements and job reports accurately Undertaking minor associated installation or making-good tasks where required Maintaining company vehicle stock, tools, equipment and records in line with company procedures Participating in an out-of-hours call-out rota, currently around 1 week in 12 Person Specification Applicants should be able to demonstrate: Experience as a Fire & Security Engineer, Security Engineer or similar field-based systems role Strong working knowledge of IP CCTV, intruder alarm and door entry/access control systems Practical experience maintaining, fault-finding and repairing fire alarm systems Experience with systems such as Galaxy, Texecom, Hikvision, Dahua, Paxton, PAC, Videx, Gent, Advanced, Notifier, Morley, C-tec or similar would be advantageous Good understanding of health and safety requirements, site working practices and risk management Ability to work independently, prioritise workload and solve technical issues on site Strong customer-facing communication skills and a professional approach to service delivery Full UK driving licence Experience with gates, barriers, disabled refuge systems or nurse call systems would be beneficial, although training can be provided where required. Salary and Benefits The role offers a salary of £21£24 per hour , equivalent to approximately £42,680£49,920 per annum , with travel paid after the first 30 minutes each way. Overtime is available at enhanced rates, with evenings paid at 1.5x and late shifts/weekends paid at 2x . Benefits include company van and fuel, laptop, mobile, tools, pension, healthcare, 25 days holiday plus statutory bank holidays, overtime opportunities and paid call-out rota allowance. This is an excellent opportunity for a capable Fire & Security Engineer to join a busy, growing engineering business offering variety, strong earning potential and the chance to continue developing across a wide range of fire and security technologies. To apply, please submit your CV by clicking on the relevant links. If successful, you will be contacted by one of our consultants within 3 working days. Unfortunately, due to the volume of applications we expect to receive for this vacancy, if you do not hear from us within this time, you should presume your application has been unsuccessful on this occasion. Grassroots Recruitment is acting as a recruitment agency and a recruitment business in respect of this vacancy. Grassroots Recruitment is an equal opportunities employer and recruiter. We welcome applications from all sections of the community, regardless of age, race, sex, sexual orientation, marital status, religion or disability. TPBN1_UKTJ

Your Impact* Assist with providing advice and support on Quality Assurance and Quality Control activities. Quality Assurance EngineerApplylocations: GB - Luton - Cap. We’re offering an exciting opportunity to join us as a Quality Assurance Engineer within our Surveillance & Protection Te

Senior Electronics Design Engineer The Opportunity Are you an experienced Senior Electronics Design Engineer who wants more ownership, more variety and the opportunity to genuinely lead projects from concept through to production? This is a chance to join an innovative UK electronics design business supporting major OEMs across sectors including Automotive, Clean Energy, Communications, Defence & Aerospace, Medical, Scientific Research and Space. This isn't simply a design role where you're handed a specification and asked to deliver a piece of hardware. As a Senior Electronics Design Engineer, you'll take ownership of projects, work directly with clients, decide how the engineering challenge should be approached, get hands-on with the design yourself and provide technical direction to the wider engineering team. You'll work alongside Electronics, PCB, Mechanical and Software Engineers, giving you exposure to the complete product lifecycle – from initial customer enquiry, requirements capture and quotation through to design, testing and manufacturing. The role is primarily remote, but you'll need to be within comfortable travelling distance of Dunstable, Bedfordshire. The business has a dedicated electronics laboratory on site, and you'll occasionally need to be there for hardware build, bring-up, testing, integration and fault finding. Some customer-site travel may also be required. What You'll Be Doing As a Senior Electronics Design Engineer, you'll be trusted to take projects and run with them, balancing technical delivery, client expectations, timescales and budget. Your responsibilities will include: Owning electronics design projects from initial enquiry and requirements capture through to production handover. Working directly with clients to understand, challenge and translate requirements into clear technical specifications. Defining project scope, estimating engineering effort and identifying the resources and skills required. Providing technical direction to Electronics and PCB Engineers, allocating work and reviewing outputs. Acting as the day-to-day technical contact for clients, managing progress, scope, change and expectations. Carrying out hands-on hardware design, simulation, prototype bring-up, testing and fault finding. Supporting quotations and proposals with technical input, estimates and delivery plans. Identifying project risks and technical issues early, then taking ownership of finding practical solutions. Producing and reviewing technical documentation, design reviews and engineering reports. Supporting EMC, qualification, validation and integration activities at the laboratory, external test houses and customer sites. Helping develop engineering standards, processes and best practice while supporting the development of less experienced engineers. What We're Looking For You might already be working as a Senior Electronics Design Engineer, Principal Engineer or Technical Lead. Equally, you could be a strong Senior Engineer who is ready to take the next step and wants the opportunity to own projects rather than simply contribute to them. You'll ideally bring: A degree or equivalent qualification in Electronics Engineering or a related discipline. Significant commercial experience designing electronic hardware from concept through to production. Demonstrable experience taking ownership of projects and delivering against agreed timescales. Mixed analogue and digital electronics design experience, including microcontrollers. Experience with schematic capture using Altium and/or Cadence. Strong technical documentation and report-writing skills. Experience providing technical direction, mentoring or reviewing the work of other engineers. Confidence dealing directly with technical and non-technical customers. A structured, methodical approach to electronics design and problem solving. Experience with FMEA, validation, approvals and engineering change processes. The ability to manage project timing, priorities and competing demands. Eligibility to obtain and hold UK Security Clearance (SC). A full UK driving licence, as occasional customer-site travel may be required. Skills That Would Be a Bonus Experience with switched-mode power supplies, microprocessors, EMC testing, communications protocols such as CAN, Ethernet, RS485 and USB, version control, or high-speed Signal Integrity and Power Integrity would all be valuable. Experience working within an electronics design consultancy or design services environment would also be advantageous, particularly if you've worked across multiple customers and projects. Exposure to managing subcontracted Software, Firmware or Mechanical Engineering resources would be another strong addition. Why This Role? The biggest difference here is ownership. As a Senior Electronics Design Engineer, you'll have the freedom to make engineering decisions, influence how projects are delivered and build strong relationships with customers. You'll still be hands-on technically, but you'll also have the opportunity to shape projects, guide other engineers and become someone clients trust to deliver. You'll have the variety of working across multiple industries and technologies, without being tied to a single product or programme. What's On Offer: Competitive salary. Primarily remote working with access to a fully equipped electronics laboratory in Dunstable. 25 days' holiday plus bank holidays. Company pension. Private healthcare following successful completion of probation. Life insurance. Free parking at the Dunstable facility. The opportunity to work across diverse electronics projects for major OEM customers. Genuine progression towards Principal-level technical responsibility for the right individual. Location: Primarily remote, with occasional travel to Dunstable and customer sites. Ideally, you'll live within approximately 90 minutes of Dunstable as hands-on laboratory work will be required at key stages of projects

Quality Engineer Luton 6-Month Contract Paying up to £37p/h (Inside IR35) Key Responsibilities Act as the Quality focal point for in-service and returns material activities Support investigation and resolution of non-conformances, including root cause analysis and corrective actions Review and approve quality documentation related to returns, concessions, and repair activities Ensure effective traceability and configuration control of returned and unserviceable items Interface with internal stakeholders (Engineering, Supply Chain, and Operations) and external suppliers Ensure compliance with AS9100, Quality Management System, and customer contractual requirements Contribute to continuous improvement activities across in-service quality processes Deliver compliant products in a timely manner, meeting all cost and safety requirements Provide reports and supporting data to the Programme, Project, and functional teams Required Experience Further education and/or experience in Engineering, Quality, Manufacturing, or a similar discipline within Defence Electronics or a comparably complex industry Demonstrated knowledge of AS9100 / ISO9001 and Continuous Improvement principles Experience with Quality tools such as Root Cause Corrective Action, Pattern Fault Lifecycle, Verification, etc. Logical thinker, capable of turning complex data into practical, actionable solutions aligned with business goals Strong interpersonal skills with a collaborative working style across all functions Excellent analytical skills and attention to detail Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Product Security Engineer Luton 6-month contract Paying up to Circa £93p/h (Inside IR35) Please note - Due to the nature of the work, you'll be required to hold a high level of UK Security Clearance Overview: As the Product Security Engineer /Lead security Engineer, you'll take responsibility for all security aspects of product design, development, verification and maintenance through all phases of the product lifecycle. The role will focus on undertaking security risk assessments, preparing security risk mitigation plans, deriving security requirements and working closely and directly with product development teams to design, implement and maintain appropriate security controls and the production of wider security artefacts. Responsibilities: Production of Security Management Plans, work package descriptions and cost estimates in support of product bids, services and proposals. Undertaking security risk assessments, risk mitigation plans, mitigation gap analysis and preparation of security management documentation for system assurance. Defining product security requirements, advising development teams on bespoke implementations for product security control implementations and overseeing product development activities. Liaison with internal and external security assurance authorities to desmontrate product compliance against recognised UK and wider frameworks. Driving collaborative working with external security authorities such as the NCSC to provide underwriting of security solutions. Understanding and management of security activities within development, testing and manufacturing environments. Advising development teams on suitable platform lockdown and configurations, and supporting penetration test activities. Analysing penetration test results and preparation of remedial action plans. Identify, communicate and drive through life security management, including but not limited to obsolescence planning, vulnerability and patch management for all products within area of responsibility. Lead security incident management teams during incident/crisis situations in conjunction with Head of Product Security for EW/FCA. Review, maintain and participate corporate product security policies. Deliver product security training to project engineering teams. Essential Skills & Experience Experience in the development of besoke product-based security solutions for a military and/or commercial products and systems. Graduate degree in relevant engineering, computing or related scientific discipline, and/or evidence of further professional study. Full membership of an NCSC recognised professional security body organisation (i.e. CIISec, ISC2 or ISACA). Recent experience and demonstratable knowledge of live and legacy UK/EU/NATO information security standards and frameworks, including the UK MOD Secure by Design framework, GovS 007, HMG IS1&2, ISO27001, NIST SP800-30/37/53, UK MOD Information Security related JSPs, EU CRA and US DoD information security policies. Practical experience of producing technical assurance documentation such as Key Management Plans, Testing Security Instructions, Security Operating Procedures and Security Cases. Knowledge of current cryptographic technologies and key management systems. Understanding of Model Based System Engineering (MBSE) and how Product Security directly inputs into the process. Knowledge and understanding of bespoke product-specific Operating Systems, Firmware and Software security controls and how to apply them. Knowledge of Quantum Cryptography & Quantum Key management. Experience or knowledge of existing threat intelligence sources. Knowledge of NATO security policy, risk management and Accreditation. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Are you a Business Development Manager with experience selling engineered or industrial solutions into manufacturing or process industries? This is an opportunity to combine technical sales with genuine long-term career progression within a specialist water treatment business. BASIC SALARY: Up to £55,000 BENEFITS: · Annual Bonus linked to business growth · Pension · 23 Days Holiday LOCATION: This is a hybrid role, you must be commutable to our office in Hertfordshire. COMMUTABLE LOCATIONS: Luton, Stevenage, Bedford, Cambridge, St Albans, Milton Keynes, Hemel Hempstead, Northampton JOB DESCRIPTION: Technical Sales Manager, Business Development Manager - Water Treatment, Process Equipment As our Business Development Manager, you'll be responsible for driving new business growth whilst developing an established customer base across the UK. Working with Engineering Managers, procurement professionals and business owners, you'll provide technically engineered water treatment solutions into industrial and process markets. Initially, your focus will be approximately 70% account management and 30% new business development, building long-term customer relationships and identifying opportunities to grow revenue. As your knowledge of the business develops, you'll gain increasing exposure to commercial strategy, operations and business management as part of a planned succession programme. You will: · Sell technically engineered water treatment and process equipment solutions into industrial markets. · Prepare quotations, negotiate commercial agreements and manage opportunities through to completion. · Work closely with technical colleagues and manufacturing partners to deliver the right solution for every customer. · Contribute towards future business growth through market development, commercial strategy and long-term planning. PERSON SPECIFICATION: Technical Sales Manager, Business Development Manager - Water Treatment, Process Equipment You'll enjoy building long-term customer relationships and be motivated by winning new business. You're commercially aware, naturally curious and keen to develop your career beyond sales, with an interest in understanding how a successful engineering business operates. Previous experience within water treatment would be beneficial, but we're equally interested in candidates from other technical or industrial sales backgrounds who can demonstrate a consultative approach and the ambition to progress. You'll also have: · A successful track record of generating new business whilst developing existing customer relationships. · Experience selling engineered products, capital equipment or technical solutions into industrial markets. · The ability to understand technically complex products and recommend the right solution for each customer. THE COMPANY: For over 20 years we've been designing and manufacturing high-quality engineered water treatment systems for customers across a range of industrial sectors. Our reputation has been built on technical expertise, high-quality engineered solutions and exceptional customer service. PROSPECTS: This role has been created as part of our long-term succession planning strategy. You'll begin by developing your commercial expertise before gaining exposure to wider business functions including operations, finance, production and strategic planning, creating genuine opportunities to progress into senior leadership within approximately five years. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Technical Sales Manager, Business Development Manager, Area Sales Manager, Sales Engineer, Key Account Manager, Technical Sales Engineer - Process Engineering, Water Treatment, Water Purification, Filtration, Pumps, Valves, Process Equipment, Industrial Automation, Process Control, Manufacturing Equipment, Industrial Machinery, Utilities, Chemical Processing, OEM, Engineering, Industrial Manufacturing. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SM18608, Wallace Hind Selection

Trainee AI Engineer - No Experience Needed! Ready to launch a future-proof career in AI - even if you have zero experience? We’re looking for ambitious individuals ready to break into the world of artificial intelligence and data science. Our industry-leading AI Traineeship is designed to take you from complete beginner to a highly employable Junior AI Engineer, with full training provided and a guaranteed job offer (£25K-£45K starting salary) within 20 miles of your location. Whether you're working full-time, part-time, or currently unemployed, our flexible, self-paced program allows you to train around your lifestyle and be job-ready in as little as 6-12 months. How it works - your journey to AI success Step 1: Discover AI Start your journey with our beginner-friendly mini-course bundle. Explore the fundamentals of AI through interactive videos, presentations, and quizzes - all accessible anytime, anywhere, through our easy-to-use online platform. Step 2: Full-Stack AI Mastery Dive deeper with in-demand technical skills including Python programming, data handling, machine learning, and version control with Git and GitHub. You’ll work on hands-on mini projects that mirror real-world challenges, helping you build confidence and a strong portfolio as you learn. Step 3: Get Certified Prepare for and earn your Microsoft AI-900: Azure AI Fundamentals certification, an internationally recognised qualification that proves your knowledge and boosts your credibility with employers. Step 4: Real-World Projects Showcase your new skills with two industry-based, practical projects assigned by your personal tutor. These projects are designed to give you real, portfolio-worthy experience, making you stand out to employers from day one. Your guaranteed future After completing your training, you'll be placed in a Junior AI Engineer role with a guaranteed starting salary of £25K-£45K. We work with top employers across the UK to ensure you get matched with a role close to home. We guarantee a job offer upon completion or 100% of your course fees refunded. We’re proud to have helped over 1,000 people each year transform their careers. Explore our success stories on our website and see what your future could look like. At a one off cost of £990, or a deposit of £149 followed by 10 interest free monthly instalments of £124, this represents a great opportunity to start a rewarding career in Ai and have a real career ladder to start climbing. If you are not offered a role at the end of the training we will refund 100% of your course fees. Ready to future-proof your career? If you’re passionate about tech and ready to break into one of the fastest-growing industries in the world, apply now. One of our friendly advisors will be in touch to guide you through the next steps. ‘Please note that this is a training course and fees apply

Fuel your future with AO – and unlock serious earning potential. We’re all about making work, work for you. With a shift pattern designed for real life, you’ll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you’ll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It’s everything you need to power your career forward, with a team that’s got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you’ll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You’ll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You’ll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years’ experience in gas installations It’d be great if you also have: Some experience installing electrical appliances (but don’t worry — we’ll give you all the training you need to get up to speed) Our Benefits: What’s in it for you At AO, we’ve designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you’ll work less than half the year. A company van with fuel paid for, so you’re ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that’s not all — there’s plenty more to discover when you join the team Click ‘Apply’ now to join our family and find out more about the Gas Installations Engineer role

Service Contracts Manager Location: Field Based (UK Travel Required) Reports To: Regional Service Manager About the Role We are seeking an experienced and commercially focused Service Contracts Manager to be responsible for the effective management and retention of service contracts and key customer accounts within a defined region. The successful candidate will maximise contract revenue and profitability through strong account management, operational collaboration, contract governance, and customer relationship management. This role requires close partnership with service, sales, finance, and operational teams to ensure contractual commitments are delivered successfully while identifying opportunities for business growth. Key Responsibilities Contract & Account Management Develop and maintain key account plans to maximise the value and growth potential of contracted accounts. Build and maintain strong relationships with key customer stakeholders. Act as the primary point of contact for contract reviews and service provision changes. Monitor contract performance against agreed service level agreements (SLAs). Ensure high levels of customer satisfaction and service delivery excellence. Identify opportunities to expand products and services within existing accounts. Commercial & Financial Management Manage the retention and renewal of service contracts. Ensure accurate capture and invoicing of all contracted activities. Implement annual contract price increases where applicable. Provide accurate revenue forecasts on a weekly, monthly, quarterly, and annual basis. Work closely with finance teams to resolve invoicing and credit control matters. Analyse contract performance, commercial trends, and profitability. Operational Coordination Collaborate with regional service and operational teams to ensure efficient contract delivery. Facilitate effective communication between service, sales, administration, and finance teams. Ensure all contract implementation and setup documentation is completed accurately. Maintain up-to-date contract records within company systems. Support timely contract renewals and amendments. Reporting & Analysis Produce management information and performance reports for contracted customers. Generate account analysis and business reports for internal stakeholders. Utilise business systems and reporting tools to extract and analyse data. Investigate and explain variances relating to service delivery, compliance, and financial performance. Skills & Experience Essential Commercial and service management experience within a healthcare or medical services environment. Strong contract management and account management experience. Excellent organisational and planning skills. Strong analytical and problem-solving capabilities. Experience interpreting operational and financial performance data. Excellent communication and relationship-building skills. Advanced Microsoft Office skills, including: Excel Word PowerPoint Outlook Teams Ability to work effectively with multiple stakeholders across different functions. Desirable Qualified Engineer or technical background. Experience negotiating service contracts and commercial agreements. Experience presenting management information and performance data to customers and senior stakeholders. Key Competencies Influencing & Negotiation Builds credibility and trust with customers and colleagues. Gains commitment through effective persuasion and negotiation. Promotes solutions and recommendations confidently. Influences stakeholders at multiple levels. Analysis & Communication Produces clear, concise, and professional written communication. Presents information in a structured and logical manner. Tailors communication style to suit different audiences. Explains complex information clearly and effectively. Presentation Skills Confident presenter with strong communication skills. Able to engage audiences and respond effectively to feedback. Delivers presentations professionally and credibly. Planning & Organisation Prioritises workload effectively. Plans activities and projects in advance. Meets deadlines and manages competing priorities. Organises resources to achieve business objectives. Adaptability Responds positively to change. Adapts working style to different situations and stakeholders. Demonstrates resilience and flexibility. Embraces new ideas and continuous improvement initiatives. This is an excellent opportunity for a commercially minded service professional with strong contract management experience to play a key role in driving customer retention, service excellence, and business growth. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website

For over 35 years, Line Up Aviation has been providing specialist recruitment solutions across the aviation and aerospace sectors, supporting airlines, MROs, OEMs and aviation service providers across the UK and internationally. We are currently recruiting for a Planning Engineer to join a well-established aviation maintenance operation based in Luton. This is a fantastic opportunity for somebody with aviation planning or maintenance experience to join a fast-paced engineering support environment, playing a key role in the generation and control of aircraft maintenance work packages while ensuring regulatory compliance at all times. Key Responsibilities Generate and issue aircraft maintenance work packages for production staff Ensure maintenance activities are carried out in accordance with airworthiness regulations and company procedures Support with maintenance costings and hours reviews Create and maintain work cards, planning databases and project documentation Identify tooling, spares and subcontract requirements Liaise with internal departments to provide clear and accurate work instructions Support daily planning operations and wider production activities Assist with compliance, safety and audit-related requirements Prioritise workloads effectively within a fast-moving operational environment Liaise with CAMO and operational teams regarding maintenance requirementsEssential Criteria Previous aviation planning or aircraft maintenance experience Experience working within an airline, MRO or similar aviation environment Strong organisational skills and ability to work under pressure Good understanding of aviation maintenance and regulatory requirements High level of computer literacy, including Microsoft Office Right to work in the UK is essential - sponsorship is not available for this roleDesirable Criteria Experience using MRO systems such as AMOS, OASES or Rusada Previous exposure to aircraft maintenance planning environmentsAdditional Information Salary: £50,000 to £55,000 (inclusive of shift allowance) Permanent position Based in Luton 5,5,4 shift pattern 10-hour day shiftsIf you would like to be considered for this opportunity, please apply today with an up-to-date CV. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Susanne Howe-Smith at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

The Role We are currently recruiting for an experienced Senior Electronics Design Engineer to join an established engineering and technology business delivering bespoke electronic solutions for a range of OEM customers. This is a hands-on design position focused on technically challenging hardware projects. The successful candidate will take ownership of designs from initial concept through to a proven, manufacturable product, working alongside multidisciplinary engineering teams. The role will cover the full product lifecycle, including requirements, architecture, circuit design, PCB development, testing, validation and production. This is an ideal opportunity for an engineer who wants to remain technically hands-on, rather than move into a predominantly management-focused position. Key Responsibilities • Own hardware designs from concept through to production, • Interpret customer requirements & specifications, • Carry out circuit design & component selection, • Complete worst-case analysis & simulation, • Work closely with PCB layout engineers, • Carry out board bring-up, testing & fault finding, • Design for manufacture, test & compliance, • Support EMC, safety & qualification testing, • Produce technical documentation, specifications & test plans, • Lead and participate in design reviews, • Provide technical input for quotations & proposals, • Attend customer technical discussions, • Identify and communicate technical risks, • Provide technical support and mentor less experienced engineers Key Skills & Experience Essential: Commercial electronics design experience Proven designs taken from concept to production Strong analogue & digital electronics experience Experience with microcontrollers Schematic capture – Altium Strong structured approach to electronics design Confident with laboratory testing, measurement & fault finding Experience working with PCB layout engineers Strong technical writing & documentation skills Experience with FMEA & structured problem solving Experience with approvals & validation Ability to manage project timings Able to work autonomously Eligible to obtain and hold UK Security Clearance (SC) Full UK driving licence Desirable Skills Switched Mode Power Supply design Experience with 8, 16, 32 & 64-bit microprocessors EMC testing & design Programming experience or awareness Version control CAN, Ethernet, RS485 & USB CAN/Ethernet diagnostics Experience working across multiple clients/projects Signal Integrity & Power Integrity knowledge Experience designing to recognised standards/regulations Experience mentoring junior engineers Current or previous UK Security Clearance The Package Competitive salary 25 days' holiday + bank holidays Hybrid/remote working Company pension Free parking Private healthcare following successful probation Life insurance

Electrical Engineering Manager Reporting to the Head of Operations Based in: North London (Fully Remote) Salary: Negotiable - Whilst all salaries are graded, Sembcorp are keen to attract, retain and develop the highest calibre of colleague. The company also offer a market leading benefits package and annual bonus. Position overview: As the Electrical Engineering Manager for the business, you will report to the Head of Operations and provide leadership, technical governance, and engineering support across all electrical assets and activities. This includes troubleshooting, fault diagnosis, maintenance management, HV switching operations, electrical installations, modifications, and capital projects, ensuring all work is completed in compliance with relevant legislation, industry regulations, IET Wiring Regulations, and British Standards. You will act as the business's Technical Authority for Electrical Engineering, providing expert guidance and assurance across all high-voltage and low-voltage systems. The role is responsible for the safe, reliable, and efficient operation of electrical assets through the development of engineering standards, maintenance strategies, asset management plans, and continuous improvement initiatives. Key responsibilities: Support the team who are made up of mechanically biased engineers Nationally Act as the electrical expert with a hands-on approach Carry out testing, inspection and rectification works on electrical equipment across our fleet of engines and associated equipment Assemble, install, test, certify and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures Plan and carry out projects in conjunction with the Operations Support team Monitor, adjust and identify faults as required, propose upgrades as required to eliminate obsolescence Schedule and undertake periodic maintenance on all electrical equipment, components, and installations • Responsible for HV and LV planned maintenance contract on existing and new sites. Provide strong leadership to the Electrical team, providing guidance, coaching and collaboration within the team Create SWI (Safe Work Instructions) documentation for operation of HV switchgear in line with Closure of FCB and/or Isolation and Earthing of HV switchgear. Co-ordinate and conduct onsite training of completed SWI to FSE’s including approval of authorization. Managing site planned and reactive electrical works i.e. lighting repairs, distribution boards PAT Testing etc. Liaising with DNO/HV Contractors regarding planned outages and site issues Liaising with Gas network operators regarding planned outages and site issues. Providing technical support on Ops site based issues both electrical/control and process orientated. Update and maintain electrical and process documentation. Managing contractors and other third party relationships and Contract documentation as required Support the HOO in the completion of project work (Electrical requirement specifically) as and when required Assist the integration of meter data collection when required Act as the Authorising Engineer for the Flex Business combining the audit and review of AP’s and SAP’s to ensure Operational are performed in alignment with the Sembcorp standards and safely. Support the HOO CAPEX / OPEX development Support the company in increasing profitability by managing resources efficiently and making necessary recommendations Consider and produce designs for control systems or electrical installations that comply with 18th Electrical Regulations, UK good practice and ensure they are fit for purpose Able to identify continuous improvement ideas and on approval execute accordingly Able to work autonomously and as part of a team Support the development of OPEX/CAPEX Items Collaborate with the wider business on all HV related topics Be the point of contact for DNO’s and NESO for planned and unplanned outages Be the technical authority supporting the wider team and third parties involved in the HV Network To be considered for the role you will have: City and Guilds electrical qualification 18th Edition Recognized apprenticeship HV SAP or Authorising Engineer 5 years’ experience excluding post apprenticeship qualification in a management position Experience with BESS (Utility or Grid scale) Experience with Gas peaking plant Experience in carrying out testing and inspection, reactive maintenance works and minor installation works Modifying control panels and understanding electrical schematics Previous experience of modifying electrical schematics Experience of PLC’s, using them to fault find or carrying out minor modifications A good all round level of fault finding exposure would be required industry experience would be advantageous HV Operational Plant Experience would be beneficial including HV systems/Switching and protection systems Full driving licence, as operational sites are located throughout Great Britain Right to work in the UK is essential Awareness of ATEX / DSEAR regulations would be desirable Experience of Cummins or Jenbacher engines would be beneficial For more information on this opportunity please contact your retained recruitment partner Adam Pearson at Imperial Recruitment Group. Imperial Recruitment Group is committed to being an equal opportunities employer. We celebrate diversity and are dedicated to creating an inclusive environment for all employees. We welcome applications from individuals of all backgrounds, experiences, and abilities, ensuring fair treatment throughout the recruitment process

If you're an experienced technical salesperson who enjoys building long-term customer relationships and solving engineering challenges, this is an opportunity to grow an established customer base whilst developing new business across UK manufacturing and industrial markets. BASIC SALARY: Up to £55,000 BENEFITS: · Company Car or Car Allowance · Annual bonus based on business growth and personal growth (circa £10,000) · Pension Contributions · Private Healthcare · Death in Service (4x Salary) · 24 Days Holiday plus Birthday Off · Free EV Charging at the Office LOCATION: Home based with travel to customers nationwide and occasional visits to the office in Bedfordshire. COMMUTABLE LOCATIONS: Milton Keynes, High Wycombe, Oxford, Reading, Slough, Aylesbury, Luton, Watford, Hemel Hempstead, Northampton, Bedford. JOB DESCRIPTION: Business Development Manager, Account Manager, Technical Sales - Water Treatment, Industrial Engineering Reporting to the General Manager, as our Account Manager, you'll manage a healthy mix of existing accounts and new business opportunities (approximately 70% account management and 30% new business). Working with engineers and manufacturing customers, you'll recommend specialist UV disinfection solutions that improve efficiency and protect critical assets. Supported by the Business Manager and an experienced technical team, you'll represent a portfolio of market-leading UV technologies, building long-term customer relationships across UK manufacturing and industrial markets. KEY RESPONSIBILITIES: Business Development Manager, Account Manager, Technical Sales - Water Treatment, Industrial Engineering As our Account Manager, you will: · Develop new business opportunities whilst increasing revenue within an established portfolio of industrial customers. · Build strong relationships with engineers, production managers, maintenance teams and procurement professionals across UK manufacturing businesses. · Recommend technical solutions that improve efficiency, productivity and operational performance. · Manage the full sales process from enquiry and quotation through to negotiation, order and ongoing account development. · Maintain an active sales pipeline and CRM whilst identifying future growth opportunities. · Work closely with internal technical specialists and supplier partners to deliver exceptional customer support. PERSON SPECIFICATION: Business Development Manager, Account Manager, Technical Sales - Water Treatment, Industrial Engineering You will be someone who enjoys building long-term customer relationships whilst growing existing accounts and winning new business. You'll be comfortable working with engineers and taking a consultative approach to technical sales. Experience within water treatment or UV technology would be preferred, although we'll also consider candidates from a wider technical or industrial sales background. You'll also have: · Experience selling technical products, engineered solutions or industrial equipment into manufacturing, industrial or process-led environments. · The ability to build credibility with engineers, production managers, maintenance teams and procurement professionals. · Experience managing your own sales pipeline and forecasting activity through a CRM system. · Strong commercial awareness with the ability to identify opportunities, negotiate effectively and convert enquiries into orders. THE COMPANY: We're a well-established engineering business supplying specialist technical solutions into manufacturing and industrial markets across the UK. Our reputation has been built on technical expertise, quality products and long-term customer relationships. As we continue to grow, we're looking to strengthen our commercial team with an experienced Business Development Manager to help drive the next phase of our success. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Business Development Manager, Technical Sales Engineer, Area Sales Manager, Regional Sales Manager, Account Manager, Applications Engineer or Technical Sales - water treatment systems, pumps, filtration, valves, instrumentation, UV, industrial automation, process equipment, process control, manufacturing equipment, engineering consumables, industrial machinery - food & beverage, pharmaceutical, chemical, utilities, manufacturing, industrial processing, energy or OEM markets. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SM18606, Wallace Hind Selection

Job role: Mobile Vehicle Technician £55,000+ Overtime + Company Van + Paid Travel Bonus Schemes - Upskilling Training Shift: Monday - Friday - DAYS We’re looking for a Mobile Vehicle Technician to join clients leading engineering team, working to service, maintain, and repair diesel engines within recycling & renewable energy sites. Full Training provided to up skill from vehicles to - Plant, Large engines, Generators, and associated machinery. The main responsibilities of the Mobile Vehicle Technician will include - • Service, Maintenance and Rebuilds of diesel engines, • Service, Maintenance and Repair of power generation machinery - CHP units, Generators, Biogas systems., • Service, Maintenance and Repair of Mobile Plant Machinery - Material Handlers, Loading Shovels, Forklifts, Cranes, Skid Steers, • Service, Maintenance and Repair of Conveyor Systems, Shredders, Balers Compactors., • Carrying out breakdown support on CHP units and generators, • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Mobile Vehicle Technician role, please submit an up-to-date CV through this advert. Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Car Technician

Test Engineer – Luton, Bedfordshire** The Test Engineer, reporting to the Test Manager, is responsible for conducting acceptance testing and reporting on electrical units in accordance with quality procedures and engineering requirements at the production site in Luton. This role requires close collaboration with the Electrical, Hydraulic, Quality, and Production teams to ensure that test plans, quality standards, and safety requirements are fully met. Key Responsibilities- • Perform acceptance testing on large-scale induction motors, up to 13.8kV and 3.2MW., • Accurately monitor, record, and report test data in alignment with defined test plans and engineering standards., • Ensure that test reports are completed and logged within engineering systems within 24 hours of test completion., • Investigate and support the development of test data acquisition and control systems. Essential Requirements • Qualification at Level 4/5 (NQF) in Electrical Engineering or a related discipline., • High voltage awareness and experience working with high voltage equipment., • Experience with large-scale test setups and power systems., • Proficiency with data acquisition systems and adherence to test procedures and quality plans. APPLY NOW For the Test Engineer job in Luton, Bedfordshire

Job role: Field Service Engineer £50,000 - Overtime + Company Van + Paid Travel Industry Training Shift: Monday - Friday - DAYS Our Client is looking to upskill - Vehicle Technicians / HGV Technicians / Plant Fitters / Generator Engineers We’re looking for a Field Service Engineer to join clients leading engineering team, working to service, maintain, and repair generators, Biogas plants, plants, CHP Systems and associated plant machinery. The main responsibilities of the Field Service Engineer will include - • Carrying out planned maintenance and emergency breakdown support of Generators., • Diagnosing and repairing faults on mechanical, electrical, and control systems, • Supporting installation, commissioning, and optimisation of new systems, • Delivering a high standard of customer service while working on client sites, • Working both independently and as part of a wider technical support team If you are interested in this Field Service Engineer role, please submit an up-to-date CV through this advert. Biogas / CHP / Generator / Maintenance Engineer / Multi Skilled Engineer / Maintenance Technician / Generator Engineer / Generator Technician / FSE / CHP Engineer / Biogas Engineer / Diesel Engineer / HGV Technician / PSV Technician / Vehicle Technician / Service Technician / Anaerobic Digestion / Renewable Energy / Vehicle Technician / Vehicle Mechanic / Plant Fitter / Plant Engineer

Field Service Engineer (Packaging Machinery) £40,000 - £47,000 + Training + Progression + Company Vehicle + Fuel Coverage + Personal Use + 25 Days Holiday + Bank Holidays + Life Insurance *Full Manufacturer Training in Italy* Luton Are you a Field Service Engineer, with a mechanical and electrical background, looking to join a growing manufacturer of specialist packaging machinery? On offer is the opportunity to join a UK market-leading supplier of liquid filling and capping machinery. The company designs, manufactures, installs and supports packaging equipment for the cosmetic, personal Care, pharmaceutical and healthcare industries. You will provide installation, servicing, maintenance and breakdown support on specialist packaging machinery at customer sites across the UK. Occasionally, you will travel to machine suppliers over in Italy. The role will involve diagnosing mechanical, electrical, pneumatic and control-system faults, as well as installing, commissioning and upgrading equipment. This role would suit a multi-skilled Field Service Engineer looking for long-term career development within a specialist engineering environment. The Role Carry out planned preventative maintenance, servicing and repairs on packaging machinery Diagnose and fault-find mechanical, electrical, pneumatic and control-system issues Install, commission and set up new packaging machinery Attending customer sites across the UK, with 1-2 nights away per week and occasional travel to Italy Complete service reports, maintenance records and testing documentation Monday to Friday The Person Experience working as Field Service Engineer Qualification in Mechanical or Electrical Engineering Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26905 Keywords: Service Engineer, Field Service Engineer, Packaging Machinery, Filling Machinery, Capping Machinery, Mechanical Engineering, Electrical Engineering, Fault Finding, Preventative Maintenance, PPM, Breakdown Support, Installation, Commissioning, Machinery Upgrades, Machinery Refurbishment, Pneumatics, Control Systems, Process Machinery, Packaging Equipment, Customer Service, Technical Support, Operator Training, Service Reports, UK Travel, Full UK Driving Licence We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Agricultural Service Engineer Location: Luton Hours: Full-time, Monday to Friday (39 hours per week) with additional hours and weekend work during peak seasonal demand We are recruiting on behalf of a long-established, family-owned business for an Agricultural Service Engineer to join their Luton branch. This is a field and workshop-based role working on a premium range of agricultural machinery within a busy and well-supported service team. Key Responsibilities Service and maintain agricultural machinery including JCB Agriculture, Amazone, McHale, Lemken, Sumo and other leading brands Carry out repairs in line with manufacturer specifications to ensure reliability and safety Diagnose and rectify electrical, hydraulic, powertrain, and mechanical faults Use diagnostic software via laptop (training provided) Complete detailed service reports including photos, timesheets and documentation Identify additional repair opportunities and support service upselling where appropriate Maintain accurate records of work completed and machine condition Work with GPS, telematics and machine control systems Ensure demo and returned machines are inspected, complete and undamaged Carry out welding and fabrication when required Liaise with service departments and support operational planning Support preparation for shows, open days and events Attend manufacturer training when availableSkills & Experience Required Experience working with agricultural, plant or commercial vehicle machinery Strong diagnostic and fault-finding ability across mechanical, electrical and hydraulic systems Welding and fabrication skills desirable Good understanding of modern machine systems including GPS/telematics (advantageous) Ability to work independently and as part of a team Strong communication skills with a customer-focused approach Good time management and ability to work under pressure during peak periods Full UK driving licence required Relevant land-based engineering qualification preferred but not essentialWhat’s on Offer Company van provided Mobile phone, tablet and corporate clothing 24 days holiday plus bank holidays Company pension scheme (7% employer / 3% employee contribution) Life assurance Ongoing manufacturer training and development Overtime availableHow to Apply If you're an experienced engineer looking to join a reputable and long-established business working on high-quality agricultural machinery, apply now. Alternatively, contact David at Holt Recruitment on (phone number removed). Holt Recruitment are a leading recruitment agency specialising in Automotive, Motor Trade, Engineering, OEM, and related industries. We specialise in Plant, Agricultural, Powered Access, Forklift, Lift & Access, and Static Plant sectors. We recruit across the UK for roles including: Mobile Plant Engineer, Plant Fitter, Agricultural Engineer, Agricultural Mechanic, Powered Access Engineer, Forklift Engineer, MHE Engineer, and Generator Engineer. DH

Fuel your future with AO – and unlock serious earning potential. We’re all about making work, work for you. With a shift pattern designed for real life, you’ll have the flexibility you need to keep everything in balance. As one of our Gas Engineers, you’ll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. And the best bit? The rewards. You can earn: Up to £2,000 in performance bonuses A £2,000 welcome bonus just for joining the team Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year It’s everything you need to power your career forward, with a team that’s got your back every step of the way. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you’ll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You’ll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time A Few Things About You: You’ll need to have: A full UK driving licence with no more than 6 points CCN1 & CKR1 qualifications To be over 21 for insurance purposes At least 1 years’ experience in gas installations It’d be great if you also have: Some experience installing electrical appliances (but don’t worry — we’ll give you all the training you need to get up to speed) Our Benefits: What’s in it for you At AO, we’ve designed our benefits to make life easier, inside and outside of work: A 4 on, 4 off shift pattern with 24 days holiday — you’ll work less than half the year. A company van with fuel paid for, so you’re ready to go from day one. On-call support from our expert technical team whenever you need it. Access to fantastic training facilities with ongoing development opportunities. A competitive pension scheme. Plus, a great range of everyday perks: Simply Health cash plan to help cover healthcare costs Help at Hand — access to a 24/7 GP and wellbeing support The option to buy extra holidays for even more flexibility A cycle to work scheme to support a healthier commute Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder And that’s not all — there’s plenty more to discover when you join the team Click ‘Apply’ now to join our family and find out more about the Gas Installations Engineer role

Whether you’re an ambitious Control Systems Engineer with hands-on PLC & SCADA skills looking to step up, or an experienced Project Engineer ready to own full system design and delivery, we want to hear from you!. We’re open to Junior Control Systems Engineers hungry to grow or Senior Projec

Promotion and support of the company Machine Control products across all the construction sectors. Delivery and collection of machine control equipment to customers and suppliers. Provide quality and efficient machine control installations on in house plant machinery.

The CCTV & Door Access Control Engineer will be responsible for the installation, maintenance, and troubleshooting of door access control systems. CCTV & Access Control Field Engineer. Troubleshoot and resolve issues related to access control systems, including hardware malfunctions and software err

An opportunity has arisen for a Highway Development Control Engineer to join a client in London. Key Responsibilities: ·Responding to planning enquiries from an engineering perspective, including section 278, section 28 and section 106 agreements ·Managing the design review process f

About the role I’m currently leading a search for a Protection & Control Design Engineer to join a major contractor who are part of the National Grid design framework. This is a brilliant technical design role for a fantastic business, so if you are a protection and control design expert on t

Noise Control Engineer (Acoustics / Manufacturing). This is a fantastic opportunity to join a market-leading acoustic engineering company with over 50 years of industry expertise, delivering specialist noise and vibration control solutions across multiple sectors. In this role, you'll provide techni

Salary & Benefits Up to £55,000 DOE (flexibility for exceptional candidates) Private healthcare Overtime paid for working away Flexible working environment Early finish every Friday (2pm) Excellent long-term career progression Opportunity to help shape and grow a new Controls Engineering team

In this role, you'll provide technical product support to customers, engineers, and the wider sales team, helping deliver bespoke noise control solutions across a range of projects. The ideal candidate will come from an acoustics, noise control, or vibration engineering background, with strong techn

AusNet Services Ltd in Victoria is seeking an experienced Electrical/Transmission engineer to support protection, control, SCIMS and communications systems for transmission terminal station projects.

Baker Hicks has delivered major projects across the UK and is seeking a Senior Electrical (P&C) Engineer to drive the design and production of substation protection and control schemes for HV and EHV projects (132kV‑400kV). Mentor junior engineers and oversee the quality of design drawings and tec

If you have some or all of the following, we'd love to hear from you: Academically qualified to degree level or equivalent ideally in Electronics or Electrical Engineering Experience of the development of Control Systems Architecture ideally from within the Aerospace or Automotive industry or sim

Contractor Vacancy: Control Systems Engineer Industry: Advanced Engineering / Medical & Scientific Cooling Location: Maldon, UK - On-site Duration: 6 Months Rate: £45-50 per hour Outside IR 35 The Role A leading innovator in cooling technology is seeking an experienced Contract Controls Design

The Controls Systems Engineer shall specify, design and validate complex sub-systems, including high-level requirements for the software and / or hardware system components, this will include creation of mathematical models and simulations of control and actuation systems. Job Description Control &a

We are seeking an experienced Protection and Control Design Engineer to lead and deliver high-quality engineering designs for HV substations and power infrastructure projects. The engineer will develop, validate, and integrate protection, control, and SCADA designs, ensuring ongoing safety, reliabil

Fire & Security Engineer to cover Hertfordshire and surrounding areas. The role involves maintenance, fault-finding and repair of CCTV, intruder alarms, access control and fire alarm systems across commercial sites.