Trabajos air quality en GlasgowCrear alertas

Air Conditioning Engineer - Central Belt - Salary up to £45,000 DOE\n \n \n Our client is a well-established engineering and building services company with a strong reputation for delivering high-quality HVAC maintenance and engineering solutions across commercial and industrial environments.\n \n \n Due to continued growth, they are looking to recruit an experienced Air Conditioning Service Engineer to join thei...\n \n \n \n \n \n ZIPC1_UKTJ

Join our growing team at Anglian Home Improvements, a leading provider of high-quality installation services for windows, doors, conservatories, and roof trims. We pride ourselves on delivering exceptional craftsmanship and excellent customer service. We are looking for skilled installers to help us continue our tradition of excellence.The RoleDue to continued growth and demand, we are seeking experienced self-employed Conservatory Installers to join our friendly team. In this role, you will be responsible for the precise installation of conservatories in and around the local area. You will work closely with clients to ensure that all installations meet our high standards of quality and safety.Key ResponsibilitiesInstall and fit conservatories with precision and care.Install and secure products using the appropriate tools and techniques.Accurately measure and cut materials for optimal fitting.Apply insulation, weatherstripping, and caulking to prevent air and water leaks.Complete interior and exterior finishing work, including trim and moulding.Ensure proper functioning of windows, doors, locks, and hardware.Maintain a clean and safe work environment.What We`re Looking ForProven experience as a Conservatory Installer or similar role.Strong knowledge of carpentry and joinery techniques.Familiarity with building codes and safety regulations.Proficiency in using hand and power tools.Excellent attention to detail and problem-solving skills.Ability to work independently and as part of a team.Valid driver's license and reliable transportation.Why Join UsUncapped earning potential, weekly paymentsMonthly incentives & prizesImmediate startContinuous volumes of workOpportunity to develop in the industryVan available for work purposesWe install home improvement excellence - We set the standard. We are passionate about delivering a high-quality installation service to every single customer. To make sure our installations teams are the best in the industry we provide a structured on-boarding induction to all new installers.Kick start your career in the industry with the best and join our Anglian family!Our Company is committed to monitoring & aligning its Policies with up-to-date Government guidance on reducing the spread of respiratory infections in the workplace. Through the Companys value of Succeed Together we are committed to Equality, Diversity and Inclusion. We recruit the best person for the job regardless of any protected characteristics as defined by the Equality Act 2010 creating an inclusive working environment and culture for our employees.TPBN1_UKTJ

Air Conditioning Engineer - Central Belt - Salary up to £45,000 DOEOur client is a well-established engineering and building services company with a strong reputation for delivering high-quality HVAC maintenance and engineering solutions across commercial and industrial environments.Due to continued growth, they are looking to recruit an experienced Air Conditioning Service Engineer to join their expanding team.This is an excellent opportunity to join a forward-thinking business that invests in its people, offers genuine career progression, and provides exposure to technically interesting projects across a diverse client portfolio.Key Responsibilities: Carry out planned preventative maintenance on commercial HVAC systems.Respond to reactive maintenance call-outs and diagnose faults efficiently.Service, repair and maintain air conditioning and ventilation equipment.Undertake fault finding and complete remedial works where required.Inspect equipment to identify potential issues and recommend solutions.Complete service reports and maintenance documentation accurately.Ensure all work complies with current health and safety legislation.Build strong relationships with clients through professional and reliable service.Participate in an out-of-hours call-out rota when required.Person Specification: Essential Proven experience servicing and maintaining commercial air conditioning systems.F-Gas Category 1 Certification.Full UK driving licence.NVQ Level 2/3, City & Guilds or equivalent in Refrigeration, Air Conditioning or HVAC.IPAF and PASMA qualifications (or willingness to obtain).Salary & Benefits: Salary up to £45,000 DOECompany vehicle, tools and equipment.Company pension.Life assurance.Generousholiday allowance.Ongoing training and professional development.Genuine opportunities for career progression.Opportunity to work on a varied portfolio of commercial and industrial sites.TPBN1_UKTJ

Location: Glasgow, United KingdomThales is a global technology leader with more than 83,000 employees on five continents. With over 7,500 people in the UK, operating across defence, space, aerospace, and digital security, we help build a future we can all trust. Thales supports the security and stability of our nation by providing extraordinary technology to our customers, as well as delivering social value to the UK with our products and services.Optronics & Missile Electronics (OME)We help forces to find the right information at the right time to make the right decision. For over 130 years we’ve proudly led the development of Optronics for military, scientific and commercial use. We cover three sectors: Air, Land and Sea.Senior Engineering Manager An exciting opportunity has arisen for a Senior Engineering Manager within Thales Optronics and Missile Electronics (OME). The successful candidate will initially undertake the role of a Senior Engineering Manager in the Sea business. This role will be on one of the largest development and production projects within OME. This role will be part of the leadership team for a large multi-entity delivery team focussed on specific development within the Sea business.As a Senior Engineering Manager you will work in collaboration with the overall Programme Director, the Senior Programme Managers, the Sea Portfolio Engineering Manager and the Head of Engineering Delivery to lead the design and development through to qualification and acceptance for development and production projects within OME and the Sea business.In this role you will be responsible for:forming and leading high performing, large multi-discipline and multi-entity engineering teams to generate engineering solutions that meet the Customer needsproducing the strategy that will ensure delivery of all engineering aspects of the programme whilst meeting the governance required within the businessworking with the Programme Manager and Programme Director to define the organisation and work breakdown required to deliver to the Customer needsdefining the project specific processes, practices and tools to be used to ensure deliverydefining and being in charge of meeting cost, schedule and quality of the whole engineering delivery for the programmedefining the engineering team’s work packages in terms of resources required, budgets assigned to each task, risks and assumptions on these and the timescales to deliver withinthe planning and prioritisation of activities required to deliver the solution to the contract schedule, costs and qualitythe day to day management of the engineering team’s activities ensuring proactive management of issues, opportunities and risksmanaging and reporting the engineering efficiency for the projectthe identification of re-use opportunities across the projectthe alignment of the project defined solution to the Product Roadmapacting as the People Manager for the engineering team on the project and provide feedback into the people manager reviews with the functional discipline leadsThe successful candidate will have an extensive background in engineering and engineering management on large complex development programmes with demonstrable experience in successfully defining and leading the delivery of multi-disciplinary engineering projects.They will be highly customer focused with excellent communication skills and have the ability to work in a fast moving environment with multiple parallel objectives. Knowledge and experience of naval products and projects would be beneficial to this role.The successful candidate will be able to demonstrate the following, aligned to the Thales Leadership Behavioural Model:acting with agility to ensure that the business objectives remain in focusdealing with multiple strands of complexity to achieve business objectivesengaging with stakeholders to achieve a common goalcreating a competitive advantage by managing risk, identifying opportunities and fostering continuous improvementsupporting the development of others to ensure we continuously improve for our customersBenefits:Performance-related bonus (grade dependent)Car cash allowance (grade dependent)Half day every Friday, usually finishing around 13:00 28 days annual leave (plus bank holidays) with opportunity to buy up to 40 hours/year (pro rata)24 hours volunteering paid forPrivate healthcare (grade dependent)Pension schemeLife cover24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discountsThis role will work closely with the Programme Manager and the Project Design Authority (PDA) for the specific project. This role will report to the Sea Portfolio Engineering Manager.Security Clearance Requirement:Due to the nature of the work that we do at Thales, many of our roles are subject to security restrictions. This role requires Security Clearance (SC). It would be advantageous if currently held, however, if not currently held, it is a requirement that the successful applicant undergo, achieve, and maintain SC Clearance prior to commencing employment. To be eligible for full SC, you generally need to have resided in the UK for the last 5 years. In some circumstances, a minimum of 3 years’ residence in the UK over the last 5 years may be accepted, with additional overseas checks.Please visit the UKSV website for further guidance: .#LI-MC2At Thales, we ensure equal opportunities, pay and working conditions for all. The benefits we offer include private medical insurance, buying or selling annual leave, cycle to work schemes, employee discounts, paid volunteering day, stocks and shares, annual bonus and much more depending on the role. Read more about our benefits here.We are committed to creating a workplace where everyone feels valued for who they are and the unique strengths they bring. Discover more about our programmes, employee networks, wellbeing policies, and inclusive features here.If this role isn’t quite right for you, we encourage you to join our talent community where your details will be shared with our recruitment teams for other potential opportunities. Join the Talent Community here.Join Thales in the UK – Innovate with us and shape the future!SummaryLocation: GlasgowType: Full time

Location: Glasgow, United KingdomThales is a global technology leader with more than 83,000 employees on five continents. With over 7,500 people in the UK, operating across defence, space, aerospace, and digital security, we help build a future we can all trust. Thales supports the security and stability of our nation by providing extraordinary technology to our customers, as well as delivering social value to the UK with our products and services.Hybrid working arrangement: 3 days per week on site (based on full time hours)Working hours: Full time or part time hours availableWe are looking for a Senior Bid Manager. In this role you will be responsible for leading the delivery of high‑quality, competitive bids that secure new business and support our growth. You’ll coordinate cross‑functional teams, shape winning strategies and ensure proposals are clear, compelling and aligned to customer needs.Core Benefits:On offer is a competitive salary and benefits package, which includes;Performance-related bonusHalf day every Friday, usually finishing around 13:0028 days annual leave (plus bank holidays) plus opportunity to buy up to 40 hours/year (pro rata)24 hours volunteering paid forPrivate healthcare (grade dependent)Pension schemeLife cover24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discountsOptronics & Missile Electronics (OME)We help forces to find the right information at the right time to make the right decision. For over 130 years we’ve proudly led the development of Optronics for military, scientific and commercial use. We cover three sectors: Air, Land and Sea.Main Responsibilities:Lead and manage the full bid lifecycle, ensuring structured, timely and high‑quality submissions.Coordinate bid teams to develop robust pre‑qualification responses and proposal deliverables.Work with Capture Leads to define win themes and strengthen customer value propositions.Oversee costing, pricing reviews and business case preparation to support competitive bids.Engage with customers, suppliers and internal stakeholders throughout the bid process.Ideal Experience & Skills:Proven success delivering bids in complex, multi‑disciplinary environments.Strong leadership and coordination skills, with the ability to drive bid teams to successful outcomes.Excellent stakeholder and negotiation skills with customers and internal partners.Strong commercial, financial and analytical capability.Thorough understanding of bid processes, governance, risk management and the full bid lifecycle.Security Clearance Requirement:Due to the nature of the work that we do at Thales, many of our roles are subject to security restrictions. This role requires Security Clearance (SC). It would be advantageous if currently held, however, if not currently held, it is a requirement that the successful applicant undergo, achieve, and maintain SC Clearance prior to commencing employment.To be eligible for full SC, you generally need to have resided in the UK for the last 5 years. In some circumstances, a minimum of 3 years’ residence in the UK over the last 5 years may be accepted, with additional overseas checks.Please visit the UKSV website for further guidance: .#LI-DNIAt Thales, we ensure equal opportunities, pay and working conditions for all. The benefits we offer include private medical insurance, buying or selling annual leave, cycle to work schemes, employee discounts, paid volunteering day, stocks and shares, annual bonus and much more depending on the role. Read more about our benefits here.We are committed to creating a workplace where everyone feels valued for who they are and the unique strengths they bring. Discover more about our programmes, employee networks, wellbeing policies, and inclusive features here.If this role isn’t quite right for you, we encourage you to join our talent community where your details will be shared with our recruitment teams for other potential opportunities. Join the Talent Community here.Join Thales in the UK – Innovate with us and shape the future!SummaryLocation: GlasgowType: Full time

Location: Glasgow, United KingdomThales is a global technology leader with more than 83,000 employees on five continents. With over 7,500 people in the UK, operating across defence, space, aerospace, and digital security, we help build a future we can all trust. Thales supports the security and stability of our nation by providing extraordinary technology to our customers, as well as delivering social value to the UK with our products and services.Optronics & Missile Electronics (OME)We help forces to find the right information at the right time to make the right decision. For over 130 years we’ve proudly led the development of Optronics for military, scientific and commercial use. We cover three sectors: Air, Land and Sea.Engineering Delivery ManagerAn exciting opportunity has arisen for an Engineering Delivery Manager within Thales Optronics and Missile Electronics (OME). This role will be on at least one of our significant development and production projects within OME. As an Engineering Delivery Manager you will work in collaboration with the Programme Managers, the Engineering Delivery Lead, the Head of Engineering Delivery and the wider engineering team to ensure delivery of the engineering development projects.In this role you will be responsible for:leading high performing, multi-discipline engineering teams to generate engineering solutions that meet the Customer needsthe definition of the engineering delivery strategy and resource profile based on the engineering estimates to ensure the delivery of the projectmanaging the interfaces with the overall delivery strategy for the wider programmedefining the organisation and work breakdown, with the Programme Manager, required to deliver to the Customer needsdefining and being in charge of meeting cost, schedule and quality of the whole engineering delivery for the programmedefining the engineering team’s work packages in terms of resources required, budgets assigned to each task, risks and assumptions on these and the timescales to deliver withinthe planning and prioritisation of activities required to deliver the solution to the contract schedule, costs and qualityday to day management of the engineering team’s activities ensuring proactive management of issues, opportunities and risksmanaging and reporting of the engineering efficiency for the projectthe identification of re-use opportunities across the projectact as the People Manager for the engineering team on the project and provide feedback into the people manager reviews with the functional discipline leadsThe successful candidate will have a strong background in engineering with experience in successfully defining and leading the delivery of multi-disciplinary engineering projects. They will be highly customer focused with excellent communication skills and have the ability to work in a fast moving environment with multiple parallel objectives and have an understanding of systems engineering life cycle, practices and tools. Knowledge and experience of naval, air or land products would be beneficial to this role.The successful candidate will be able to demonstrate the following, aligned to the Thales Leadership Behavioural Model:acting with agility to ensure that the business objectives remain in focusdealing with multiple strands of complexity to achieve business objectivesengaging with stakeholders to achieve a common goalcreating a competitive advantage by managing risk, identifying opportunities and fostering continuous improvementsupporting the development of others to ensure we continuously improve for our customersThis role will work closely with the Programme Manager and the Project Design Authority (PDA) for the specific projects. This role will report to the Head of Engineering Delivery.Security Clearance Requirement:Due to the nature of the work that we do at Thales, many of our roles are subject to security restrictions. This role requires Security Clearance (SC). It would be advantageous if currently held, however, if not currently held, it is a requirement that the successful applicant undergo, achieve, and maintain SC Clearance prior to commencing employment. To be eligible for full SC, you generally need to have resided in the UK for the last 5 years. In some circumstances, a minimum of 3 years’ residence in the UK over the last 5 years may be accepted, with additional overseas checks.Please visit the UKSV website for further guidance: .BenefitsPerformance-related bonus Half day every Friday, usually finishing around 13:00 28 days annual leave (plus bank holidays) with opportunity to buy up to 40 hours/year (pro rata)24 hours volunteering paid forPrivate healthcare Pension schemeLife cover24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts#LI-MC2At Thales, we ensure equal opportunities, pay and working conditions for all. The benefits we offer include private medical insurance, buying or selling annual leave, cycle to work schemes, employee discounts, paid volunteering day, stocks and shares, annual bonus and much more depending on the role. Read more about our benefits here.We are committed to creating a workplace where everyone feels valued for who they are and the unique strengths they bring. Discover more about our programmes, employee networks, wellbeing policies, and inclusive features here.If this role isn’t quite right for you, we encourage you to join our talent community where your details will be shared with our recruitment teams for other potential opportunities. Join the Talent Community here.Join Thales in the UK – Innovate with us and shape the future!SummaryLocation: GlasgowType: Full time

Job Title: Asbestos Surveyor AnalystLocation: Glasgow \n Penguin Recruitment is delighted to be supporting a well-established UKAS-accredited asbestos consultancy in their search for an experienced Asbestos Surveyor Analyst to join their team in Glasgow. \n This is an excellent opportunity for a dual-qualified asbestos professional looking for a varied role covering Glasgow and the wider Central Belt. The successful candidate will undertake a balanced mix of surveying and analytical duties across commercial, industrial, education, healthcare, residential, and public sector properties. \n You'll benefit from a structured workload, strong operational support, and genuine opportunities for long-term career development within an established consultancy. What You'll Be Joining\n You'll be joining a respected asbestos consultancy with an established client base across Scotland. The company places a strong emphasis on technical quality, compliance, realistic workloads, and supporting the continued development of its employees. Salary & Benefits\n\n • \n Competitive salary \n • \n Company vehicle provided \n • \n Company pension scheme \n • \n Overtime opportunities available \n • \n Ongoing training and professional development \n • \n Structured and manageable workload \n • \n Varied projects across the Central Belt \n • \n Long-term career progression opportunities \n • \n Permanent, secure position \nThe Role\n\n • \n Carrying out Management and Refurbishment & Demolition (R&D) asbestos surveys in accordance with HSG264 \n • \n Undertaking air monitoring and four-stage clearances in accordance with HSG248 \n • \n Carrying out reassurance, leak, background, and personal air testing \n • \n Conducting bulk asbestos sampling across a variety of property types \n • \n Producing accurate and compliant asbestos survey and analytical reports \n • \n Working across commercial, industrial, education, healthcare, residential, and public sector sites \n • \n Managing your own diary and workload effectively \n • \n Liaising professionally with clients, contractors, and internal teams \n • \n Ensuring all work complies with current asbestos legislation, HSE guidance, and UKAS procedures \nAbout You\n\n • \n BOHS P402, P403 and P404 qualifications (essential) \n • \n Previous experience working as an Asbestos Surveyor Analyst \n • \n Strong understanding of HSG264, HSG248, and current asbestos legislation \n • \n Experience working within a UKAS-accredited consultancy is desirable \n • \n Confident managing a field-based workload independently \n • \n Strong communication and report-writing skills \n • \n Full UK driving licence \n • \n Professional, organised, and reliable approach to work \nWhy This Role\n\n • \n Genuine dual surveying and analytical position \n • \n Varied workload across Glasgow and the Central Belt \n • \n Structured scheduling and strong operational support \n • \n Ongoing technical development \n • \n Excellent long-term career progression opportunities \n • \n Permanent position within an established consultancy \n\n If you are interested in this role, contact Joel Bland on or email

Mechanical Design Engineer Location Glasgow, ScotlandYour Opportunity An exciting opportunity has arisen for a Mechanical Design Engineer to join a well-established and highly respected Building Services consultancy in Glasgow. Renowned for delivering innovative engineering solutions across a diverse range of sectors, the business offers the chance to work on high-profile projects within a collaborative and supportive environment.This role is ideal for an engineer who is passionate about sustainable building design and is looking to further develop their technical expertise while working alongside experienced professionals on projects from concept through to completion.The Role As a Mechanical Design Engineer, you will play a key role in the design and delivery of mechanical building services solutions across a broad range of projects. Working as part of a multidisciplinary team, you will contribute to developing practical, energy-efficient and technically robust engineering designs that meet both client and regulatory requirements.You will be involved throughout the project lifecycle, from feasibility and concept design through to detailed design, construction support and project completion.Key Responsibilities Design mechanical building services systems, including heating, ventilation, air conditioning (HVAC), domestic water services and public health systems.Produce mechanical calculations, technical specifications and design reports.Prepare and coordinate mechanical drawings and BIM models using Revit and AutoCAD.Collaborate closely with architects, structural engineers, electrical engineers and contractors to develop coordinated design solutions.Attend client meetings, design team meetings and technical workshops.Undertake site surveys, inspections and provide technical support during construction and commissioning.Ensure all designs comply with current Building Regulations, British Standards, CIBSE guidance and health and safety legislation.Develop sustainable and low-carbon engineering solutions, incorporating energy-efficient technologies where appropriate.Support project delivery by managing workloads, meeting project deadlines and maintaining high technical standards.Build and maintain strong working relationships with clients and project stakeholders.About You The successful candidate will have experience in mechanical building services design and enjoy working in a collaborative consultancy environment. You will possess strong technical knowledge, excellent communication skills and a proactive approach to problem-solving.You will have:A degree (or equivalent qualification) in Building Services Engineering, Mechanical Engineering or a related discipline.Experience within a Building Services consultancy undertaking mechanical design.A strong understanding of HVAC, public health and mechanical building services design principles.Experience using industry-standard software such as Hevacomp, IES VE, Revit and AutoCAD.Knowledge of current Building Regulations, British Standards and CIBSE guidance.Excellent communication and interpersonal skills.Strong organisational skills with the ability to manage multiple projects simultaneously.A proactive and detail-oriented approach to delivering high-quality engineering solutions.A full UK driving licence is desirable.Desirable Progress towards Chartered Engineer (CEng) status with CIBSE or IMechE.Experience delivering projects across commercial, education, healthcare, residential, industrial or public sector developments.Knowledge of sustainable building design, net-zero strategies and renewable technologies.Familiarity with BIM processes and multidisciplinary project delivery.TPBN1_UKTJ

Asbestos Surveyor / Analyst - Glasgow\n Location: Glasgow, ScotlandSalary: £36,000 (depending on experience)Contract: Permanent | Full-time \n A well-established UKAS-accredited asbestos consultancy is looking to appoint an experienced Asbestos Surveyor / Analyst to support a busy and expanding workload across Glasgow and the surrounding region. This is a great opportunity for a dual-qualified professional seeking a stable role with a consistent pipeline of work and strong long-term prospects. \n This position offers a balanced mix of surveying and analytical duties across commercial, domestic, and public sector projects. \n What You'll Be JoiningYou'll be joining a respected consultancy known for delivering high-quality asbestos services across Scotland. The company promotes a supportive working environment, realistic workloads, and ongoing staff development. \n Salary & Benefits£36,000 salary \n Company vehicle or car allowance \n 22-25 days annual leave + bank holidays \n Company pension scheme \n Ongoing training and development \n Overtime opportunities \n Stable, long-term workload \n Supportive management team \n The RoleCarrying out Management and Refurbishment & Demolition (R&D) asbestos surveys \n Undertaking air monitoring, including 4-stage clearances and reoccupation certification \n Conducting bulk sampling and ensuring correct procedures are followed \n Producing accurate, compliant reports in line with HSG264 and HSG248 \n Managing workload across multiple sites \n Liaising with clients, contractors, and internal teams \n About YouBOHS P402, P403 & P404 (essential) \n Full UK driving licence \n Experience working as a dual Surveyor / Analyst \n Strong knowledge of asbestos legislation and compliance \n Professional, organised, and reliable \n Strong communication skills \n Why This RoleCompetitive salary for a dual-role position \n Varied workload across multiple sectors \n Strong benefits package \n Long-term stability within a growing consultancy \n Supportive and well-managed environment \n For further information or to apply, contact Aidan Morgan or send your CV to for immediate consideration.

Job Title: Asbestos Surveyor AnalystLocation: Glasgow \n Penguin Recruitment is delighted to be supporting a well-established UKAS-accredited asbestos consultancy in their search for an experienced Asbestos Surveyor Analyst to join their team in Glasgow. \n This is an excellent opportunity for a dual-qualified Asbestos Surveyor Analyst looking to join a respected consultancy delivering high-quality asbestos services across Glasgow and the wider Central Belt. The successful candidate will undertake a varied mix of surveying and analytical duties across commercial, industrial, education, healthcare, residential, and public sector properties. THE ROLE\n As an Asbestos Surveyor Analyst, you will be responsible for delivering both asbestos surveying and analytical services across a diverse portfolio of client sites throughout Glasgow and the surrounding areas. \n Working independently and alongside an experienced technical team, you will deliver accurate, professional services while ensuring full compliance with HSG264, HSG248, current asbestos legislation, HSE guidance, and UKAS procedures. KEY RESPONSIBILITIES\n\n • \n Carrying out Management and Refurbishment & Demolition (R&D) asbestos surveys in accordance with HSG264 \n • \n Undertaking air monitoring, four-stage clearances, reassurance testing, leak testing, and personal air monitoring in accordance with HSG248 \n • \n Conducting bulk asbestos sampling across a range of property types \n • \n Producing accurate and compliant asbestos survey and analytical reports \n • \n Working across commercial, industrial, education, healthcare, residential, and public sector sites \n • \n Managing your own diary and workload effectively \n • \n Liaising professionally with clients, contractors, and internal teams \n • \n Ensuring all work complies with current asbestos legislation, HSE guidance, and UKAS procedures \nWHAT WE'RE LOOKING FOR\n\n • \n BOHS P402, P403 and P404 qualifications (essential) \n • \n Previous experience working as an Asbestos Surveyor Analyst \n • \n Strong understanding of HSG264, HSG248, and current asbestos legislation \n • \n Experience within a UKAS-accredited consultancy is desirable \n • \n Full UK driving licence \n • \n Strong communication and report-writing skills \n • \n Ability to work independently and manage a field-based workload \n • \n Professional, organised, and reliable approach to work \nWHAT'S ON OFFER\n\n • \n Competitive salary \n • \n Company vehicle provided \n • \n Company pension scheme \n • \n Ongoing training and professional development \n • \n Varied surveying and analytical workload \n • \n Structured scheduling and strong operational support \n • \n Permanent, long-term position \n • \n Genuine opportunities for career progression \n\n If you are interested in this role, contact Joel Bland on or email

Job: Mechanical Auxiliary Engineer \n Company: BAE Systems \n Hourly Rate: £46.01 PAYE or £62.06 Umbrella Location: Glasgow - 1-2 days on-site per week Contract: 12 months (Opportunity to be extended) Working Hours: 37 hours per week \n Key Responsibilities: \n\n • Creation of Schematics, Technical Specifications, Design Calculations and General Management of Auxiliary Fluid Systems.\n, • Participate fully in developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need.\n, • Carry out relatively technical analyses and investigations, including evaluation and selection of technical options, and prepare reports with suggested recommendations to support the resolution of problems and the improvement of engineering capability.\n, • Prepare specifications, develop designs in line with specifications and all quality and technical standards, and carry out design appraisals in assigned areas to ensure all standards are maintained.\n, • Carry out investigations into operational problems or developments and develop and prepare solutions, individually or as a member of a project team.\n\n Skills & Qualifications: \n\n • Degree qualified in a Marine Engineering related discipline.\n, • Chartered Engineer or working towards it, as a minimum should be Incorporated Engineer and Member of an appropriate Institute.\n, • Experience in Mechanical Systems for marine applications.\n\n If you would like to be considered for this role please don't hesitate to click apply or call Sam Pierre-Louis on for more information. \n About BAE: \n BAE Systems is a leading global defence, aerospace, and security company. They’re experts in delivering advanced solutions for air, land, and naval forces, as well as commercial aerospace and cyber security. Known for its commitment to innovation and excellence, BAE Systems offers exciting career opportunities for those looking to make a significant impact in cutting-edge technology and defence sectors. \n Inclusion statement \n Outsource UK is committed to creating a diverse environment and is proud to be an equal opportunity employer. You'll receive consideration for your application without regard to race, religion or belief, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age.

Are you ready to kick-start your engineering career with one of the UK's most respected building services consultancies?We're recruiting on behalf of a well-established, nationally recognised MEP consultancy with an outstanding reputation for delivering innovative and sustainable engineering solutions across a diverse range of sectors. This is an excellent opportunity for a Graduate Mechanical Design Engineer (Building Services) to join a supportive, collaborative team where your development is a genuine priority.From day one, you'll be given the opportunity to work on a variety of exciting projects, gaining hands-on experience alongside experienced engineers who are invested in your success. Whether it's commercial developments, healthcare, education, residential or public sector projects, you'll develop a broad range of technical skills and build a strong foundation for your career. What You'll Be Doing\n\n • Assisting with the design of mechanical building services systems, including heating, ventilation, air conditioning and public health services.\n, • Supporting the production of calculations, technical reports, specifications and design drawings.\n, • Working closely with senior engineers and multidisciplinary teams throughout all project stages.\n, • Attending site visits and client meetings to gain practical project experience.\n, • Learning industry standards, regulations and best practice while developing your technical expertise.\n, • Contributing to the delivery of high-quality engineering solutions across a varied project portfolio.\nWhat We're Looking For\n\n, • A degree (or expected degree) in Mechanical Engineering, Building Services Engineering or a related discipline.\n, • A genuine interest in mechanical building services design.\n, • Strong communication and problem-solving skills.\n, • A proactive attitude and willingness to learn.\n, • The ability to work effectively as part of a collaborative team.\nWhat's on Offer\n\n, • A structured graduate development programme with dedicated mentoring.\n, • Clear progression opportunities and support towards professional accreditation.\n, • Exposure to a wide variety of high-profile projects across multiple sectors.\n, • Ongoing technical and professional training.\n, • A collaborative and supportive team environment.\n, • Competitive salary and comprehensive benefits package.\n, • The opportunity to build your career with a recognised industry leader that invests in its people.\n\n \n Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Managing Consultant – Construction Environmental ManagerMake Your Mark at ERMERM is seeking an experienced and motivated Managing Consultant – Construction Environmental Manager to support the delivery of major infrastructure projects during the construction phase. This role offers the opportunity to be at the forefront of project delivery, providing on-site environmental leadership and ensuring construction activities are undertaken in compliance with environmental commitments, consent requirements, and regulatory obligations.Working across sectors including electricity transmission and distribution, renewable energy, hydrogen, solar, and onshore wind, you will play a critical role in helping clients translate environmental commitments into practical construction controls, ensuring projects are delivered responsibly, sustainably, and in line with regulatory expectations.As a senior member of the team, you will act as the environmental lead on site, working closely with construction teams, contractors, clients, environmental specialists, and regulators to manage environmental risk and drive a culture of environmental excellence throughout project delivery.The RoleAs a Construction Environmental Manager, you will lead environmental compliance and environmental management activities during construction. You will act as the primary environmental point of contact on-site, ensuring environmental requirements are effectively implemented, monitored, and communicated across all project activities.You will work closely with project teams to identify environmental risks, resolve compliance issues, and ensure mitigation measures and monitoring commitments are delivered effectively throughout construction.Key ResponsibilitiesLead the delivery of Construction Environmental Manager services on major infrastructure and energy projects during construction.Act as the primary environmental representative on-site, providing advice and support to construction teams, contractors, and project management personnel.Ensure construction activities are undertaken in accordance with consent conditions, environmental permits, licences, approved management plans, and project commitments.Support the implementation and management of Construction Environmental Management Plans (CEMPs) and associated topic-specific environmental management plans.Monitor compliance with environmental commitments, mitigation measures, and legal obligations throughout the construction phase.Conduct regular site inspections, compliance audits, and environmental monitoring activities to identify risks and drive continual improvement.Lead investigations into environmental incidents, non-conformances, complaints, and near misses, ensuring appropriate corrective actions are implemented.Maintain environmental compliance records and provide clear documentation demonstrating adherence to project requirements.Support the management of environmental risks relating to areas such protected species, water quality, waste management, pollution prevention, noise, air quality, and biodiversity.Deliver environmental inductions, toolbox talks, and awareness sessions to promote environmental best practice across the project workforce.Coordinate environmental monitoring programmes and oversee the implementation of mitigation and enhancement measures.Liaise effectively with clients, contractors, environmental specialists, regulators, and other stakeholders regarding environmental performance and compliance.Prepare compliance reports, environmental performance dashboards, audit findings, and management updates for project leadership teams and regulators.Support regulator inspections, client audits, and independent compliance reviews.Mentor and support junior environmental professionals within project teams.Contribute to business development activities, proposal preparation, and the continued growth of ERM’s construction environmental management services.Why This Role MattersEffective environmental management during construction is essential to delivering infrastructure projects safely, responsibly, and in compliance with regulatory requirements. As a Construction Environmental Manager, you will play a pivotal role in ensuring environmental commitments made during the consenting process are successfully implemented on the ground.Your expertise will help clients reduce environmental risk, maintain programme certainty, foster positive stakeholder relationships, and demonstrate environmental leadership throughout construction. Through your work, you will contribute to the successful delivery of projects that support the transition to a more sustainable future.What We're Looking ForEssentialExperience in construction environmental management, environmental compliance, environmental advisory, or project environmental delivery within the UK infrastructure sector.Degree (or equivalent qualification) in Environmental Management, Environmental Science, Geography, Ecology, Engineering, or a related discipline.Experience supporting or leading environmental management activities during the construction phase of major infrastructure projects.Strong understanding of environmental legislation, regulatory compliance requirements, and environmental management systems.Experience implementing and monitoring Construction Environmental Management Plans (CEMPs) and associated environmental controls.Knowledge of Environmental Impact Assessment (EIA) commitments and the practical implementation of mitigation and monitoring measures during construction.Experience undertaking environmental audits, inspections, compliance assessments, and incident investigations.Strong understanding of environmental topics including pollution prevention, ecology, biodiversity, water quality, waste management, noise, air quality, and protected species management.Experience working collaboratively with contractors, construction managers, engineers, project managers, and environmental specialists.Excellent stakeholder management and communication skills.Strong organisational skills and the ability to manage multiple priorities in a dynamic construction environment.Full UK driving licence and willingness to travel and work on project sites as required.DesirableExperience working on transmission and distribution, renewable energy, hydrogen, or other major infrastructure projects.Professional membership of a relevant institution (IEMA, CIWEM, CIEEM, CEnv or equivalent).Internal or Lead Auditor qualification.Knowledge of ISO 14001 Environmental Management Systems.Experience supporting regulatory inspections and engagement with organisations such as the Environment Agency, Natural England, NatureScot, Natural Resources Wales, or local authorities.Line management, mentoring, or supervisory experience.Experience working within principal contractor or EPC contractor environments.What You'll BringYou are a proactive, solutions-focused environmental professional who thrives in a construction environment. You enjoy being on-site, working directly with project teams to solve challenges, manage environmental risks, and ensure compliance requirements are translated into practical actions.You bring strong technical knowledge, sound judgement, and the confidence to engage with construction personnel, clients, and regulators. You are passionate about environmental stewardship, committed to high standards of compliance, and motivated by helping deliver complex infrastructure projects safely, responsibly, and sustainably.ERM is committed to creating an inclusive workplace where everyone feels valued, respected, and empowered to thrive, it’s an essential part of what makes ERM a great place to build a career and helps us create better solutions for our clients. We welcome talent from all backgrounds and provide equal opportunities for every candidate. If you have a disability, are neurodivergent, or need accommodations during the selection process, we’re here to support you. Our commitment doesn’t stop at hiring. Once you join us, we’ll ensure you have the tools, support, and adjustments needed to succeed and feel a true sense of belonging. Learn more about our Diversity, Inclusion & Belonging (DIB) efforts by visiting our website or exploring our 2025 Sustainability Report..SummaryLocation: Glasgow, United Kingdom; Norwich, United KingdomType: Full time

Ventilation SpecialistLocationScotland & North East England (Site-Based with Travel)SalaryCompetitive Salary + Company Vehicle + BenefitsThe OpportunityAn excellent opportunity has arisen for an experienced Ventilation Specialist to join a growing building services and energy solutions contractor delivering projects across Scotland and the North East of England.The business specialises in the installation, refurbishment, maintenance, and optimisation of commercial HVAC and ventilation systems, helping clients improve operational efficiency, compliance, and sustainability. With a strong pipeline of secured work and ambitious growth plans, this role offers long-term career stability and genuine progression opportunities for the right individual.Working closely with Supervisors and Project Managers, you will be responsible for the safe and efficient delivery of ventilation projects, ensuring all work is completed in line with current regulations, quality standards, and programme requirements.Key ResponsibilitiesInstall, maintain, service, and troubleshoot commercial ventilation systems.Carry out refurbishment, replacement, and upgrade works on air handling units (AHUs), fans, and associated HVAC equipment.Install and modify ductwork systems and ventilation components.Diagnose faults and implement effective remedial solutions.Ensure all work is completed safely and in compliance with CDM 2015, Building Regulations, and company procedures.Interpret technical drawings, schematics, equipment schedules, and BIM/Revit-generated information.Complete project documentation, quality records, and site reports as required.Liaise professionally with clients, contractors, and internal project teams.Support commissioning activities and project handovers.Travel to project sites throughout Scotland and the North East as required.Candidate RequirementsMinimum 6 years' experience working with commercial ventilation systems.Minimum 8 years' experience within the construction or building services sector.Strong technical knowledge of:HVAC systemsMechanical ventilationDuctwork installationsAir Handling Units (AHUs)Fan Coil Units (FCUs)Associated mechanical plantProven experience delivering ventilation projects on UK construction sites.Good understanding of health & safety legislation, CDM Regulations, and permit-to-work systems.Ability to work from technical drawings and specifications.Strong problem-solving and fault-finding capabilities.Excellent communication and organisational skills.Comfortable working independently and as part of a wider project team.Full UK driving licence.Right to work in the UK.Qualifications & CertificationsRelevant HVAC, Ventilation, or Mechanical Engineering qualifications.Valid CSCS Card.Health & Safety Certification.Additional industry certifications and training are advantageous.What's on Offer?Join a growing and forward-thinking specialist contractor.Secure pipeline of commercial projects.Opportunities for progression into supervisory and management positions.Varied project portfolio across multiple sectors.Supportive team environment with ongoing training and development.Competitive salary and benefits package.Salary:Up to c50K+ DOELocation:Glasgow Area Type:permanentSUBMIT CV

Company DescriptionAt Turner & Townsend we’re passionate about making the difference. That means delivering better outcomes for our clients, helping our people to realize their potential, and doing our part to create a prosperous society. Every day we help our major global clients deliver ambitious and highly technical projects, in over 130 countries worldwide. Our team is dynamic, innovative and client-focused, supported by an inclusive and fun company culture. Our clients value our proactive approach, depth of expertise, integrity and the quality we deliver. As a result our people get to enjoy working on some of the most exciting projects in the world.Job DescriptionDue to increased workload and securing new clients Turner & Townsend has a new opportunity for a Principal Consultant specialising as a Common Data Environment (CDE) Lead to join our team. Our team are recognised as global experts in the development and deployment of Information Management and Common Data Environments (CDE’s) on major projects and programmes, delivering client outcomes which mutually benefit the supply chain and add value to projects. The approach underpinning our delivery is: Forward thinking Careful planning Shared understanding Transparency and collaboration Independent and open methodology We work holistically with our wider business to provide an environment for innovation and deliver success on projects where Information Management is core to the delivery and operation of assets. We lead the Information Management process at organisational, programme and project level through: Discovery and understanding Client adoption strategy and strategic project setup Compliance checking and data verification Applying ISO 19650 principles to influence CDE setup and project delivery Leveraging expertise across a wide range of CDE tools for efficient and complaint Information Management Our specialist staff work globally, using cutting edge tools and techniques to deliver the vision of the world’s best clients. The Opportunity The individual will have the opportunity to work alongside a highly skilled team delivering and implementing Information Management from strategy level to project level for global clients. Key Responsibilities Complex Stakeholder Engagement: Collaborate with key stakeholders to enable effective operation and drive adoption of the CDE. Engage with third party suppliers to align with wider enterprise systems architecture. CDE configuration: Lead the development, configuration and implementation of Common Data Environments aligned to client requirements and ISO 19650 best practice. This includes folder structures, metadata, workflows and access control. Change Control: Establish and manage CDE configuration processes that support robust change control and governance. Information Standards: Produce project or programme Information Standards, detailing the Information Management and CDE requirements. Reporting: Develop and deliver programme-wide reporting and analytics on CDE usage, with a focus on data accuracy, completeness and performance. Delivery: Oversee day-to-day management and operation of the CDE and drive continuous improvement through identifying opportunities to enhance the CDE capability. Provide line management and support to CDE Managers and Document Controllers. Training and guidance: Organise and undertake regular training sessions on the purpose and use of the system for new users and refresher training for existing users. QualificationsDesirable Skills & Experience Experienced Information Manager / CDE Specialist / Lead Document Controller of 5+ years Consultancy experience favourable but not required Understanding of Building Information Modelling (BIM) in the context of Information Management and Document Control Understanding of ISO 19650 standards (particularly Part 2) and how it impacts Information Management and Document Control Experience developing Information Standards, BEPs, and AIR/EIR documentation Experience managing or mentoring CDE Managers / Document Controllers Administrator level experience using Autodesk Forma (previously Autodesk Construction Cloud) User level experience of at least one other CDE / EDMS or similar system. Advanced Microsoft Office skills. Use of advanced optional CDE / EDMS features, e.g. e-procurement, ACC Take-off Personal skills The ability to work independently & be self-motivated The ability work in a diverse skilled team Clear communication skills to all project stakeholders Ability to lead project meetings Presentation skills Workshop skills Ability to lead and contribute to team meetings and discussions Inquisitive nature Methodical approach to delivering tasks Confident in challenging others. QualificationsPreferably educated to degree level or with sufficient demonstrable workplace experience to satisfy the requirements of the role. Additional InformationSOX control responsibilities may be part of this role, which are to be adhered to where applicable.Join our social media conversations for more information about Turner & Townsend and our exciting future projects: TwitterInstagramLinkedInIt is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review. SummaryType: Full-timeFunction: ConsultingExperience level: Mid-Senior LevelIndustry: Construction

Principal Mechanical Engineer \n Glasgow \n \n About us \n \n Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. \n \n We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. \n \n We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. \n \n Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. \n \n About the role \n \n We have an opportunity for a Principal Mechanical Engineer to play a key role in delivering high‑quality, sustainable mechanical engineering solutions across multiple projects in the built environment. \n \n You will join our Mechanical team based in Glasgow, offering the opportunity to contribute to projects across Scotland and the wider UK. \n \n It’s an exciting time to join our Scotland team. Our Glasgow office—established in 2016 to provide a local presence for projects—has grown into a hub of sector expertise and knowledge that supports work across the UK. \n \n We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. \n \n Our work spans cutting edge healthcare and research facilities, high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments projects that push boundaries and deliver real-world impact. \n \n Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. \n \n Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. \n \n You will take the lead design role on significant and complex building services projects, owning the design delivery from inception to completion. As the technical lead, you will manage and prioritise the internal Hoare Lea delivery team, coordinate with other disciplines and external consultants, and represent Hoare Lea at client and project meetings. You will ensure technically excellent, commercially aware and timely delivery while developing client relationships that support future business growth. \n \n In this key and varied role, you can expect to: \n \n\n • Lead the design delivery for significant and complex schemes, taking responsibility for achieving design objectives and technical quality.\n, • Define and agree the design brief with clients and manage client and consultant relationships professionally.\n, • Represent Hoare Lea at project meetings and actively promote our services to support client projects and future business.\n, • Manage, prioritise and motivate the internal project team (including specialist groups); host and chair internal project meetings.\n, • Delegate, review and check work undertaken by others; contribute to the professional development of team members.\n, • Monitor project expenditure, costs and resource requirements; report regularly to the team leader.\n, • Identify, highlight and manage project and commercial risks, including awareness of consultant appointment conditions and procurement impacts.\n, • Ensure deliverables meet quality standards, technical accuracy and programme deadlines.\n, • Share technical knowledge across the business and work collaboratively with other professionals to deliver coordinated building designs.\n, • Communicate openly and effectively at all levels internally and externally.\n\n \n About you \n \n To be successful in this role you’ll need: \n \n\n • Qualified and recognised in the industry, preferably with Chartered status.\n, • Proven, in‑depth technical knowledge in Mechanical/building services design and applied experience of relevant regulations and design guides.\n, • Strong understanding of complementary disciplines and experience leading integrated design teams.\n, • Excellent client‑facing skills with ability to manage difficult situations calmly and professionally.\n, • Demonstrable experience leading design teams on complex projects and delivering to demanding timescales.\n, • Commercial awareness: experience monitoring project costs, identifying commercial risks and contributing to profitable delivery.\n, • Strong organisational and planning skills with the ability to prioritise and manage multiple demands.\n, • Confident communicator — excellent written and spoken English — with experience representing a consultancy externally.\n, • IT literate with proficiency in industry software (Revit, AutoCAD).\n, • Committed to continuous professional development and supporting the career growth of others.\n\n \n How to apply \n \n To apply simply complete a CV profile and submit your application, or for further information please contact aureliacherradi@hoarelea.com \n \n If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. \n \n Adjustments and accommodations \n \n If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. \n \n Data privacy \n \n We have updated our terms and conditions for candidates, click here to find out more. \n \n Recruitment agencies \n \n We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

Electrical Engineer or Senior Engineer \n Glasgow or Edinburgh \n \n About us \n Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. \n \n We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. \n \n We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. \n \n Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. \n \n About the role \n We have an opportunity for an Electrical Engineer or Senior Engineer to play a key role in delivering high quality, sustainable electrical engineering solutions across multiple projects in the built environment. \n \n You will join our Electrical team based in either our Glasgow or Edinburgh office, offering the opportunity to work with both offices and contribute to projects across Scotland and the wider UK. \n \n It’s an exciting time to join our Scotland team. Our Glasgow office—established in 2016 to provide a local presence for projects—has grown into a hub of sector expertise and knowledge that supports work across the UK. \n \n The opening of our Edinburgh office reflects our commitment to strengthening relationships with clients on the East Coast by providing a local base for those projects. This role can be based in either Glasgow or Edinburgh, \n \n We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. \n \n Our work spans cutting-edge healthcare and research facilities, a broad range of education projects—from primary and secondary schools to further and higher education campuses—high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments. These projects push boundaries and deliver real‑world impact. \n \n Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. \n \n Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. \n \n You will own project deliverables, manage elements of the internal delivery team, and liaise with multidisciplinary colleagues, clients and contractors to ensure holistic, compliant and commercially aware solutions. You will typically lead defined elements and smaller projects (Engineer) or take full lead responsibility for larger schemes and broader client engagement (Senior Engineer). You will be helping to develop junior staff and foster relationships that support future business growth. \n \n In this key and varied role, you can expect to: \n • Take briefs and deliver electrical design work from inception through to completion. \n • Produce electrical calculations, drawings and technical documentation that comply with relevant regulations, design guides and client standards. \n • Ensure quality standards and technical accuracy across deliverables. \n • Coordinate electrical design with other disciplines (MEP and our specialist groups) and third‑party consultants. \n • Review and comment on technical information provided by contractors and sub‑contractors; check site installations against the design intent. \n • Attend and report at design team meetings, client meetings and project meetings. \n • Witness selected testing and commissioning activities and support handover documentation. \n • Manage own workload to meet programme deliverables and report progress to your line manager. \n • Contribute to the professional development of junior colleagues. \n \n Additional responsibilities for Senior Engineer: \n • Develop briefs and take responsibility for delivering a small project or the electrical discipline on a significant/complex scheme. \n • Exercise considerable autonomy and take ownership for technical decisions and project delivery within cost constraints. \n • Delegate, manage and check work undertaken by others; mentor and motivate colleagues across project teams. \n • Play an active role in commercial aspects (scope, risk, cost control) and ensure outputs meet project and budgetary requirements. \n \n About you \n To be successful in this role you’ll need: \n • Degree or equivalent in Electrical/Building Services Engineering; industry membership preferred. \n • Working towards or holding IEng/CEng. \n • Strong technical competence in LV distribution, lighting, earthing/protection and emergency/standby systems; able to produce calculations and drawings. \n • Proficient with industry software (Revit, AutoCAD, Dialux, OM Electrical) and MS Office. \n • Able to work independently: deliver an element of a project (Engineer) or lead discipline/small projects and larger schemes (Senior). \n • Effective communicator with experience coordinating multidisciplinary teams and liaising with clients/contractors. \n • Experience of site checking, witnessing testing/commissioning and reviewing contractor submissions. \n • Demonstrable commitment to meeting programmes and quality standards; commercially aware. \n • Supportive team player who mentors junior staff and pursues continuous professional development (Senior expected to supervise; Engineer to support). \n \n How to apply \n To apply simply complete a CV profile and submit your application, or for further information please contact aureliacherradi@hoarelea.com \n \n If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. \n \n Adjustments and accommodations \n If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. \n \n Data privacy \n We have updated our terms and conditions for candidates, click here to find out more. \n \n Recruitment agencies \n We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list. \n

Associate or Senior Associate Electrical Engineer \n Glasgow or Edinburgh \n \n About us \n \n Important: the job title “Associate” at Hoare Lea refers to a senior-level position (not an entry-level role); please check the role description for responsibility and seniority. \n \n Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. \n \n We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. \n \n We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. \n \n Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. \n \n About the role \n We have an opportunity for an Associate or Senior Associate Electrical Engineer to play a key role in delivering high quality, sustainable electrical engineering solutions across multiple projects in the built environment. \n \n You will join our Electrical team based in either our Glasgow or Edinburgh office offering the opportunity to work with both offices and contribute to projects across Scotland and the wider UK. \n It’s an exciting time to join our Scotland team. Our Glasgow office—established in 2016 to provide a local presence for projects—has grown into a hub of sector expertise and knowledge that supports work across the UK. \n \n The opening of our Edinburgh office reflects our commitment to strengthening relationships with clients on the East Coast by providing a local base for those projects. This role can be based in either Glasgow or Edinburgh. \n \n We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. \n \n Our work spans cutting-edge healthcare and research facilities, a broad range of education projects—from primary and secondary schools to further and higher education campuses—high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments. These projects push boundaries and deliver real‑world impact. \n \n Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. \n \n Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. \n \n We are seeking an Associate Electrical Engineer or Senior Associate Electrical Engineer to lead client relationships and deliver technically excellent, commercially sound electrical design across building services projects. This vacancy will suit an experienced Associate who manages project delivery and client engagement, or a Senior Associate who leads larger, multi-disciplines schemes, contributes to business development and helps shape a high performing local team. \n \n In this key and varied role, you can expect to: \n\n • Act as primary client contact for projects; define and agree briefs and represent Hoare Lea professionally at project meetings.\n, • Promote Hoare Lea’s services to create opportunities and support client objectives.\n, • Lead and coordinate project teams (including specialist groups), prioritise workloads and host/ chair internal project meetings.\n, • Deliver profitable, high‑quality schemes; monitor project expenditure, report costs and resource needs to line managers/partners.\n, • Delegate, review and check work from junior staff; contribute to staff development and performance objectives.\n, • Maintain awareness of consultant appointment conditions, procurement routes and commercial risks; identify and mitigate business risks.\n, • Contribute to technical knowledge sharing across the firm and ensure technical accuracy and compliance with relevant standards.\n, • Build and maintain effective relationships with clients, consultants and contractors to support repeat business and growth.\n\n \n Additional responsibilities for Senior Associate: \n\n • Lead larger scale, multi‑discipline schemes, attend interviews and support bid preparation.\n, • Support development and leadership of the local team and report regularly senior management.\n\n \n About you \n To be successful in this role you’ll need: \n \n\n • Degree in Electrical/Building Services Engineering or equivalent.\n, • Chartered status required for Senior Associate, desirable/working towards for Associate.\n, • Extensive project & client leadership experience.\n, • Strong technical competence in electrical building services, working to applicable regulations and design guides.\n, • Ability to lead integrated design teams, coordinate with other disciplines and deliver technically accurate designs.\n, • Excellent client‑facing, written and verbal communication skills; able to manage difficult situations.\n, • Demonstrable commercial awareness: monitor project costs, identify/mitigate risks and contribute to profitable delivery.\n, • Proven people leadership: motivate, delegate and develop team members — leads projects (Associate) or leads teams and local practice (Senior Associate).\n, • Highly organised with strong planning skills; able to work under own initiative and deliver to demanding timescales.\n, • IT literate with proficiency in industry software and BIM workflows.\n, • Committed to continuous professional development and knowledge‑sharing.\n\n \n How to apply \n To apply simply complete a CV profile and submit your application, or for further information please contact aureliacherradi@hoarelea.com \n \n If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. \n \n Adjustments and accommodations \n If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. \n \n Data privacy \n We have updated our terms and conditions for candidates, click here to find out more. \n \n Recruitment agencies \n We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

Hybrid working arrangement: 3 days per week on site (based on full time hours) \n \n Working hours: Full time or part time hours available \n \n We are looking for a Senior Project Manager. In this role you will be responsible for leading the delivery of multiple complex projects that are critical to our customers and our business. You will take full ownership of project outcomes—driving performance, guiding multi-disciplinary teams and ensuring projects are delivered on time, to cost and to the highest quality standards. \n \n Core Benefits: \n On offer is a competitive salary and benefits package, which includes; \n\n • Performance-related bonus\n, • Half day every Friday, usually finishing around 13:00\n, • 28 days annual leave (plus bank holidays) plus opportunity to buy up to 40 hours/year (pro rata)\n, • 24 hours volunteering paid for\n, • Private healthcare (grade dependent)\n, • Pension scheme\n, • Life cover\n, • 24/7 Employee Assistance Program and access to mental wellbeing app\n, • Employee discount shopping schemes on major brands and retailers\n, • Gym membership discounts\n\n \n Optronics & Missile Electronics (OME) \n We help forces to find the right information at the right time to make the right decision. For over 130 years we’ve proudly led the development of Optronics for military, scientific and commercial use. We cover three sectors: Air, Land and Sea. \n \n Main Responsibilities: \n\n • Lead and motivate project teams to deliver high‑quality outcomes across all work packages.\n, • Establish and manage robust project baselines, schedules and forecasts.\n, • Build strong relationships with customers, suppliers and internal stakeholders.\n, • Proactively manage risks, opportunities and change throughout the project lifecycle.\n, • Ensure delivery excellence across quality, cost, schedule and customer satisfaction.\n\n \n Ideal Experience & Skills: \n\n • Proven success delivering complex projects in a multi‑disciplinary environment.\n, • Strong leadership skills with experience guiding diverse teams.\n, • Excellent stakeholder and relationship management, including customers and suppliers.\n, • Advanced project management skills—planning, risk, financial control and governance.\n, • Experience working across multi‑site or complex organisational structures.\n\n \n Security Clearance Requirement: \n Due to the nature of the work that we do at Thales, many of our roles are subject to security restrictions. This role requires Security Clearance (SC). It would be advantageous if currently held, however, if not currently held, it is a requirement that the successful applicant undergo, achieve, and maintain SC Clearance prior to commencing employment. \n \n To be eligible for full SC, you generally need to have resided in the UK for the last 5 years. In some circumstances, a minimum of 3 years’ residence in the UK over the last 5 years may be accepted, with additional overseas checks. \n \n Please visit the UKSV website for further guidance: https://www.gov.uk/government/publications/united-kingdom-security-vetting-clearance-levels/national-security-vetting-clearance-levels.

Senior Mechanical Engineer \n Glasgow \n \n About us \n \n Hoare Lea is a human-centric and planet-conscious engineering consultancy. We offer intelligent and sustainable solutions to complex design challenges for the built environment throughout the UK and further afield. \n \n We provide a wide range of engineering and consultancy services, including acoustics, air quality, building services (MEP), fire, lighting, security and sustainability to name but a few. Together, our highly skilled teams use technical expertise and problem-solving skills to bring buildings to life. We ensure that whatever the building, its design is outstanding, and its operations meet the needs of the communities it serves. \n \n We are as committed to providing an environment where everyone can realise their unique potential. So, in joining Hoare Lea, you will experience a business that enriches your knowledge, supports your wellbeing, and welcomes your individuality. You’ll have the opportunity to participate in our 9-day fortnight scheme, thriving community groups, varied social and networking events, and extensive professional and technical development schemes. We also offer an extensive benefits package, including private medical cover, an electric vehicle salary sacrifice scheme, stock options, and 25 days of annual leave (increasing with service), alongside flexible and hybrid working. \n \n Whatever your ambitions or circumstances, our aim is to enable everyone to develop their knowledge, give their best, and enjoy what they do. \n \n About the role \n \n We have an opportunity for a Senior Mechanical Engineer to play a key role in delivering high‑quality, sustainable mechanical engineering solutions across multiple projects in the built environment. \n \n You will join our Mechanical team based in Glasgow, offering the opportunity to contribute to projects across Scotland and the wider UK. \n \n It’s an exciting time to join our Scotland team. Our Glasgow office—established in 2016 to provide a local presence for projects—has grown into a hub of sector expertise and knowledge that supports work across the UK. \n \n We are a recognised leader in the built environment, shaping some of the most ambitious and technically demanding projects across the residential, hospitality, leisure, commercial, and complex engineering sectors. \n \n Our work spans cutting edge healthcare and research facilities, high-performance data centres, critical infrastructure and state-of-the-art manufacturing and technology environments projects that push boundaries and deliver real-world impact. \n \n Driven by a commitment to excellence, we combine innovation, technical expertise, and practical delivery to create solutions that are not only robust and reliable, but forward-thinking and sustainable. Our teams work at the forefront of the industry, collaborating with leading clients across the public and private sectors, both locally and internationally. \n \n Working alongside a range of specialist engineers and consultants, you will be joining a collaborative, knowledgeable, highly engaged team who love what they do, and offer a supportive, flexible, and high-performing work culture. \n \n You will own project deliverables, manage elements of the internal delivery team, and liaise with multidisciplinary colleagues, clients and contractors to ensure holistic, compliant and commercially aware solutions. You will typically lead defined elements and smaller projects (Engineer) or take full lead responsibility for larger schemes and broader client engagement (Senior Engineer). You will be helping to develop junior staff and foster relationships that support future business growth. \n \n In this key and varied role, you can expect to: \n \n\n • Take briefs and deliver mechanical design work from inception through to completion.\n, • Produce mechanical calculations, drawings and technical documentation that comply with relevant regulations, design guides and client standards.\n, • Ensure quality standards and technical accuracy across deliverables.\n, • Coordinate mechanical design with other disciplines (MEP and our specialist groups) and third‑party consultants.\n, • Review and comment on technical information provided by contractors and sub‑contractors; check site installations against the design intent.\n, • Attend and report at design team meetings, client meetings and project meetings.\n, • Witness selected testing and commissioning activities and support handover documentation.\n, • Manage own workload to meet programme deliverables and report progress to your line manager.\n, • Contribute to the professional development of junior colleagues.\n, • Develop briefs and take responsibility for delivering a small project or the mechanical discipline on a significant/complex scheme.\n, • Exercise considerable autonomy and take ownership for technical decisions and project delivery within cost constraints.\n, • Delegate, manage and check work undertaken by others; mentor and motivate colleagues across project teams.\n, • Play an active role in commercial aspects (scope, risk, cost control) and ensure outputs meet project and budgetary requirements.\n\n \n About you \n \n To be successful in this role you’ll need: \n \n\n • Degree or equivalent in Mechanical/Building Services Engineering; industry membership preferred.\n, • Working towards or holding IEng/CEng.\n, • Strong technical competence in heating, ventilation and air conditioning systems; able to produce calculations and drawings.\n, • Proficient with industry software (Revit, AutoCAD) and MS Office.\n, • Able to work independently: deliver an element of a project (Engineer) or lead discipline/small projects and larger schemes (Senior).\n, • Effective communicator with experience coordinating multidisciplinary teams and liaising with clients/contractors.\n, • Experience of site checking, witnessing testing/commissioning and reviewing contractor submissions.\n, • Demonstrable commitment to meeting programmes and quality standards; commercially aware.\n, • Supportive team player who mentors junior staff and pursues continuous professional development (Senior expected to supervise).\n\n \n How to apply \n \n To apply simply complete a CV profile and submit your application, or for further information please contact aureliacherradi@hoarelea.com \n \n If shortlisted, one of our recruitment team will be in touch to arrange an introductory call (about 30 minutes) to discuss the role and your experience in more detail. From there, successful candidates will be invited to attend a panel interview, either via Microsoft Teams or in person at one of our offices. We aim to provide feedback at each stage of the process. \n \n Adjustments and accommodations \n \n If there are adjustments or accommodations that we can put in place to help you participate and give your best at any stage of the recruitment process (whether relating to disability, neurodivergence or anything else) please let us know. \n \n Data privacy \n \n We have updated our terms and conditions for candidates, click here to find out more. \n \n Recruitment agencies \n \n We have a Preferred Supplier List of trusted partners who assist us when required. We do not acknowledge speculative CVs or unsolicited candidate introductions from agencies not on the list.

We're recruiting on behalf of a well-established, nationally recognised MEP consultancy with an outstanding reputation for delivering innovative and sustainable engineering solutions across a diverse range of sectors. This is an excellent opportunity for a Graduate Mechanical Design Engineer (Building Services) to join a supportive, collaborative team where your development is a genuine priority. From day one, you'll be given the opportunity to work on a variety of exciting projects, gaining hands-on experience alongside experienced engineers who are invested in your success. Whether it's commercial developments, healthcare, education, residential or public sector projects, you'll develop a broad range of technical skills and build a strong foundation for your career. \n \n What You'll Be Doing \n\n • Assisting with the design of mechanical building services systems, including heating, ventilation, air conditioning and public health services.\n, • Supporting the production of calculations, technical reports, specifications and design drawings.\n, • Working closely with senior engineers and multidisciplinary teams throughout all project stages.\n, • Attending site visits and client meetings to gain practical project experience.\n, • Learning industry standards, regulations and best practice while developing your technical expertise.\n, • Contributing to the delivery of high-quality engineering solutions across a varied project portfolio.\n\n \n What We're Looking For \n\n • A degree (or expected degree) in Mechanical Engineering, Building Services Engineering or a related discipline.\n, • A genuine interest in mechanical building services design.\n, • Strong communication and problem-solving skills.\n, • A proactive attitude and willingness to learn.\n, • The ability to work effectively as part of a collaborative team.\n\n \n What's on Offer \n\n • A structured graduate development programme with dedicated mentoring.\n, • Clear progression opportunities and support towards professional accreditation.\n, • Exposure to a wide variety of high-profile projects across multiple sectors.\n, • Ongoing technical and professional training.\n, • A collaborative and supportive team environment.\n, • Competitive salary and comprehensive benefits package.\n, • The opportunity to build your career with a recognised industry leader that invests in its people.\n\n \n

Principal Architect – Robotics & Hardware Abstraction\n Principal Robotics Architect | Hardware Abstraction | Embedded C++ | ROS2 Specialist. \n Location: Glasgow \n Workstyle: Hybrid \n Reports to: CTO \n About Chemify: \n Chemify is revolutionising chemistry. We are creating a future where the synthesis of previously unimaginable molecules, drugs, and materials is instantly accessible. By combining AI, robotics, and the world’s largest continually expanding database of chemical programs, we are accelerating chemical discovery to improve quality of life and extend the reach of humanity. \n Our newly opened Chemifarm facility in Glasgow operates a growing fleet of advanced robotic systems that automate synthesis, optimisation, and library generation. As we scale up to globally distributed facilities, we are undertaking a foundational transformation of how software and hardware interact across our platform. \n The Role \n We are seeking a Principal Robotics Architect to lead one of the most critical technical evolutions in Chemify’s history. Sitting within the Office of the CTO, you will act as the architectural bridge between Hardware Engineering and Software Engineering, shaping how our robots, control systems, and cloud services work together as a coherent whole. \n Your mission is to define a robust Hardware Abstraction Layer (HAL) that enables our universal chemical code (xDL) to run reliably across multiple generations of robotic platforms. You will help transform our systems from bespoke scientific instruments into intelligent, safe, and continuously updatable edge computing platforms that can operate at scale. \n If you enjoy problem solving complex technical challenges that blend system architecture, embedded engineering, distributed systems, and strategic leadership, are a natural communicator and are energized by working closely with scientists using cutting edge technologies, then we’d love to welcome you to our team. \n Key Responsibilities \n Architect the Hardware Abstraction Layer (HAL) \n\n • Define a clear, contract-first architecture that cleanly separates responsibilities between cloud services and embedded control systems.\n, • Design a resilient, event-driven control backbone (NATS/MQTT) capable of supporting real-time operation across a distributed fleet of robotic platforms.\n, • Move the intelligence to the edge. Establish a principled division between cloud-level intent and edge-level execution, ensuring predictable and safe behaviour even under network latency or connectivity constraints.\n\n Drive Software-Defined Robotics \n\n • Lead the design of edge-first safety systems, where critical thermal, pressure, and operational limits are enforced close to the hardware.\n, • Develop high-fidelity simulation and digital twin capabilities, allowing large-scale testing and validation of chemical workflows before any physical execution.\n, • Modernise embedded engineering practices across the organisation, including secure firmware delivery, structured testing, over the air updates (OTA) and hardware-in-the-loop (HIL) Ci/CD pipelines.\n\n Shape Technical Strategy \n\n • Work closely with Hardware, Software, and Scientific teams to align architecture with both near-term delivery and long-term platform scalability.\n, • Influence technical roadmaps, standards, and architectural decisions across the organisation.\n, • Serve as a technical leader and mentor, raising the bar for system design, reliability, and safety across Chemify.\n\n About You \n You are a rare hybrid: equally at home deep in embedded C++ as you are designing distributed systems that span edge devices and cloud infrastructure. You understand that in robotics, reliability and latency are not just performance concerns — they are fundamental safety constraints. \n We expect you to bring: \n\n • Embedded Mastery: 8+ years of C/C++ in safety-critical or physically consequential domains such as robotics, automotive, aerospace, or industrial automation.\n, • Strong systems thinking: Demonstrated experience designing clear boundaries between edge devices and cloud services in complex, real-world systems.\n, • Robotics middleware experience: Familiarity with modern robotics or real-time control frameworks and patterns (ROS 2 or DDS-base systems).\n, • Distributed systems: Expert-level knowledge of Python, REST, GraphQL, gRPC, protobuf, Docker, Ansible and message buses (NATS, Kafka or RabbitMQ).\n, • Architectural judgement: The ability to make principled trade-offs between performance, safety, maintainability, and scalability.\n, • Collaborative leadership: You can align chemists, mechanical engineers, and software engineers around a shared technical vision and practical path forward.\n\n Why Join Chemify? \n Impact: \n You will help build the infrastructure that enables digital chemistry at scale — accelerating discovery, improving reproducibility, and unlocking new possibilities in science and medicine. \n Autonomy: \n Reporting directly to the CTO, you will have meaningful influence over the technical direction and architectural strategy of a Series B deep-tech rocket ship. \n Ambition: \n We are scaling rapidly, investing in world-class infrastructure, and tackling problems that sit at the frontier of robotics, AI, and chemistry. You will have the resources and mandate to build the right foundations for the future. \n Principal Architect – Robotics & Hardware Abstraction #J-18808-Ljbffr

For over 140 years our products have helped ensure the safe, reliable operations of key industries. With a passion for precision and partnership, Celeros Flow Technology continues this heritage of high performance and dependability, providing mission critical, sustainable flow control solutions for our customers around the globe. \n \n \n Celeros Flow Technology is looking for individuals with a voice and a vision. We embrace change, diversity and promote new ways of looking at old ideas. We seek talented professionals to join our world-class team of innovators in a global, collaborative & multi-cultural environment, where you will be challenged, supported, and inspired to be extraordinary. \n \n \n \n GENERAL SUMMARY \n The Trade Compliance Specialist will report directly to the Global Trade Compliance Manager and will perform a variety of duties necessary to support the company’s global trade compliance program. The position functions as a professional expert authority with regard to export and import laws and regulations and is responsible for ensuring that operations are carried out in compliance with the relevant laws and regulations. Responsibilities also include training business personnel and executing operational audits to validate compliance with governing trade laws, internal policies and procedures. \n \n \n The successful candidate will also contribute to developing and maintaining a sustained and long-term continuous improvement culture and an efficient organization that consistently produces improved results while motivating and retaining its employees with high performance standards. The Trade Compliance Specialist will work closely with operational and commercial business teams to advise them of applicability of and changes in relevant export/import laws and regulations. \n \n \n PRINCIPAL DUTIES AND RESPONSIBILITIES \n\n • Provide all round global export/import compliance advice to the business.\n, • Develop, review, and update company export and import compliance policies, manuals and operating procedures.\n, • Conduct periodic training of company personnel with regard to export and import laws, regulations, policies and procedures.\n, • Assist the Global Trade Compliance Manager to develop and implement auditing methodology and conduct periodic audits to test company compliance with export and import regulations and Company procedures.\n, • Identify and classify Export (ECCN) and Import (HTS, HS) classifications for the company’s products.\n, • Ensure compliance with UK, U.S. and other applicable Export Control regulations, as well as conformance with internal corporate policies and procedures.\n, • Export controls and license determination for all exports and re-exports of tangible and intangible goods.\n, • UK Export Licensing: Submission and management of export license applications to the UK Department for International Trade Export Control Joint Unit via SPIRE.\n, • Monitor and maintain trade compliance data elements in the company’s systems.\n, • Support periodic internal assessments on the trade compliance program. Identify risk areas and recommend improvements.\n\n \n \n \n KNOWLEDGE, SKILLS AND ABILITIES \n\n • Proven track record of meeting commitments with the highest standards of ethics and integrity.\n, • Expertise with U.S., European and UK export and import regulations, including EAR, OFAC, ITAR and CBP.\n, • Ability to gain knowledge and understanding of other non-US/Europe/UK trade regulations.\n, • Working knowledge of laws and regulations impacting the company.\n, • Excellent written and verbal communication skills.\n, • Ability to manage multiple projects.\n, • Pro-active approach to work and an excellent team player with the ability to work in a fast-paced environment\n\n \n \n \n EDUCATION AND EXPERIENCE \n\n • Minimum five years’ trade compliance experience\n, • Thorough knowledge of UK, EU, and US import/export regulations, including ITAR, EAR, OFAC, HMRC, Export Control Joint Unit, and Department of International Trade\n, • Must demonstrate excellent knowledge on Classification (ECCN and HTS)\n, • Must demonstrate an extensive understanding and application of export classification and licensing principles, practices, and concepts\n\n \n \n \n LOCATION \n Glasgow, Scotland (Aberdeen will be considered). \n \n \n \n You must have valid right to work in the uk and be able to obtain Security Clearance to apply for this role. \n \n \n \n BENEFITS \n\n • Competitive salary\n, • Opportunities to develop\n, • Bonus\n, • 33 days holiday (inclusive of bank holidays)\n, • Holiday buy and sell\n, • Pension\n, • Life Cover\n, • Employee Assistance Program\n, • Digital Benefits; Health, Wealth & Lifestyle\n\n \n \n \n PHYSICAL DEMANDS \n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n\n • Required daily to stand, sit, walk, talk, hear, and see (specific close vision abilities are required to perform computer work)\n, • Required occasionally to stoop, kneel, crouch and crawl\n, • Required daily to use hands and fingers and arms to reach (to operate a computer and telephone)\n, • Required occasionally to lift and/or move objects that are light to moderate\n, • Required occasionally to travel (usually by air or road so may be required to sit for extended periods)\n\n \n \n \n WORKING CONDITIONS \n The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n\n • Ability to work with moderate noise (i.e. business office with computers, phone, and printers, etc.)\n, • Ability to work in an open planned office / individual office\n, • Ability to sit at a computer terminal for extended periods\n, • Ability to sit in a car or on a plane for extended periods\n\n \n \n \n DISCLAIMER \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. \n Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. \n \n \n \n CELEROS FLOW TECHNOLOGY VALUES \n All Celeros divisions are committed to the effective use of the Celeros Values. It is important that all employees understand and utilize these values when performing the duties of his/her position. \n INTEGRITY: We work safely and respect our employees, business partners & environment. We always lead by example. \n SPEED: In our mission to bring mission-critical flow control equipment to the world, energy in our actions & urgency. \n ACCOUNTABILITY: We stand behind our actions and deliver on our promises. \n PARTNERSHIP: We collaborate across our teams & our customers to win together. We rely on each other to deliver the best outcome & celebrate successes. \n EXCELLENCE: We are passionate about being the best at engineering, manufacturing & maintaining mission-critical equipment. We seek quality & community improvement in every interaction. \n \n \n \n QUALITY \n Quality encompasses all aspects of Celeros’ business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process and the quality system. All employees have an obligation to identify and record any such nonconformity, and through designed channels, initiate and recommend solutions. \n \n \n \n CELEROS Flow Technology is an equal opportunity employer.

Experienced Paint Sprayer Required Whats On Offer To Paint Sprayers: Monday-Friday - 8:00am-5:30pm Salary - £18 - £24 per hour dependent on experience/qualifications Fantastic individual bonus Pension and additional benefits available 1 Saturday a month may be required depending on business needs The Role of a Paint Sprayer: Paint Spraying Prepping Priming Filler Work Polishing Masking Up Colour Matching Paint Mixing Quality Control/Inspection Requirements required of a Paint Sprayer: ATA/NVQ/IMI/City & Guilds Level 2 or 3 qualified Paint Spraying or time severed within a Paint Spraying role. Full valid driving licence MUST have your own Spray Guns and Air Fed Mask Previous experience of working within an accident repair centre If you feel like you match the above criteria and would like to join an expanding team, we would love to hear from you

Welders Needed Are you a skilled Welder looking to join a world-class construction environment? We are seeking experienced professionals who take pride in delivering high-quality workmanship and contributing to the construction of cutting-edge vessels. What You'll Be Doing As a Welder, you will be responsible for fabricating, assembling and installing ship components while ensuring the highest standards of quality, safety and productivity. Key responsibilities include: Welding carbon steel, stainless steel and aluminium structures using a variety of welding processes: Manual Metal Arc (MMA) MIG Welding Automatic & Semi-Automatic Welding (Submerged Arc & KAT) Resistance Welding (Stud Welding)Working from welding procedures, manufacturing instructions and technical drawings Producing high-quality, right-first-time work that contributes to successful ship construction Using air and electric power tools safely and effectively Collaborating with supervisors, apprentices and other trades to overcome production challenges Essential Requirements ? Proven FCAW (Flux Core Arc Welding) experience - essential ? Ability to weld in multiple positions using a variety of consumables ? Valid welding qualifications and trade papers ? Strong understanding of: Safe working practices Welding procedures Manufacturing processes Quality standards and tolerances? Relevant safety certifications such as: IOSH Working Safely Confined Space Working at HeightWhat We're Looking For We want team players who are: Reliable and committed Quality-focused Strong communicators Practical problem solvers Willing to learn and adapt Passionate about sharing knowledge with apprentices and colleaguesWhy Join Us? You'll become part of a highly skilled team delivering complex engineering projects while developing your expertise in advanced welding techniques, shipbuilding processes and industry-leading quality standards. If you're an experienced FCAW Welder looking for your next challenge, we'd love to hear from you. Apply today or contact us for more information. #WeldingJobs #Welder #FCAW #Shipbuilding #MarineEngineering #ManufacturingJobs #SkilledTrades #EngineeringCareers #Hiring #TradeJobs #UKJobs #ProductionJobs

Solar PV Electrician - Battery Storage & EV Charging - Central Belt - Salary up to £42,000 DOE Due to continued growth in the renewable energy sector, we are recruiting experienced professionals to support the delivery of residential and commercial Solar PV and Battery Storage installations across Scotland and the wider UK. Successful candidates will join dedicated installation teams, working together to deliver high-quality renewable energy systems safely, efficiently, and to industry standards. Each installation team typically consists of: Solar PV Roofer – Responsible for all roofing and mechanical aspects of the installation, including mounting systems, solar panel installation, weatherproofing, and providing day-to-day guidance to the site labourer. Renewable Energy Electricians (2 positions per team) – Responsible for the installation, testing, commissioning, and certification of Solar PV and Battery Storage systems, including AC/DC wiring, inverters, and associated electrical equipment in accordance with current industry regulations. Skilled Labourer – Provides general site support, material handling, and assistance to both the roofing and electrical teams while gaining valuable experience within the renewable energy industry.Key Responsibilities: Install, commission and test Solar PV, Battery Storage, EV Charging and Air Source Heat Pump (ASHP) electrical systems. Complete AC/DC wiring, inverters, consumer unit upgrades and associated electrical works. Carry out inspection, testing, fault finding and certification in accordance with BS 7671 and relevant industry standards. Ensure all installations comply with MCS, G98/G99 and current electrical regulations. Accurately complete digital job records, certification and quality assurance documentation, including photographic evidence where required. Liaise professionally with customers, site teams and project managers to ensure successful project delivery. Maintain high standards of health, safety and workmanship, supporting labourers and apprentices where required.Person Specification: Essential: NVQ Level 3 in Electrical Installation (or equivalent) 18th Edition Wiring Regulations Inspection & Testing qualification (2391 or equivalent) Solar PV Installation qualification Electrical Energy Storage (Battery Storage) qualification EV Charging qualification ECS/JIB Gold Card Full UK Driving Licence Minimum three years' electrical installation experience Strong knowledge of BS 7671 and safe isolation procedures Comfortable using tablets or digital job management systems Desirable: Experience installing Solar PV, Battery Storage and EV Charging systems. Experience working on social housing or large-scale renewable energy programmes. Knowledge of G98/G99 grid connection requirements. Manufacturer training on leading renewable energy products is advantageous but not essential.Salary & Benefits: Competitive salary with overtime opportunities. Company vehicle and fuel card. Performance-related bonus scheme. Ongoing training and professional development. Career progression within a growing renewable energy business. Company pension. Uniform, PPE and specialist tools provided. Accommodation and meal tickets provided when working away where required. Consistent workload across Solar PV, Battery Storage, EV Charging and Heat Pump projects. Supportive team environment with a strong focus on quality, safety and continuous improvement

Multi Skilled HVAC Engineer - Central Belt - Salary up to £46,000 DOE\n \n \n Our client is a well-established engineering and building services provider with an excellent reputation for delivering high-quality maintenance solutions across a wide range of commercial and industrial properties.\n \n \n Due to continued growth, they are looking to recruit an experienced Multi-Skilled Air Conditioning Engineer to joi...\n \n \n \n \n \n ZIPC1_UKTJ

\n Are you ready to kick-start your engineering career with one of the UK's most respected building services consultancies? \n We're recruiting on behalf of a well-established, nationally recognised MEP consultancy with an outstanding reputation for delivering innovative and sustainable engineering solutions across a diverse range of sectors. This is an excellent opportunity for a Graduate Mechanical Design Engineer (Building Services) to join a supportive, collaborative team where your development is a genuine priority. \n From day one, you'll be given the opportunity to work on a variety of exciting projects, gaining hands-on experience alongside experienced engineers who are invested in your success. Whether it's commercial developments, healthcare, education, residential or public sector projects, you'll develop a broad range of technical skills and build a strong foundation for your career. \n \n \n What You'll Be Doing\n \n \n \n • Assisting with the design of mechanical building services systems, including heating, ventilation, air conditioning and public health services.\n, • Supporting the production of calculations, technical reports, specifications and design drawings.\n, • Working closely with senior engineers and multidisciplinary teams throughout all project stages.\n, • Attending site visits and client meetings to gain practical project experience.\n, • Learning industry standards, regulations and best practice while developing your technical expertise.\n, • Contributing to the delivery of high-quality engineering solutions across a varied project portfolio.\n \n \n \n What We're Looking For\n \n \n \n • A degree (or expected degree) in Mechanical Engineering, Building Services Engineering or a related discipline.\n, • A genuine interest in mechanical building services design.\n, • Strong communication and problem-solving skills.\n, • A proactive attitude and willingness to learn.\n, • The ability to work effectively as part of a collaborative team.\n \n \n \n What's on Offer\n \n \n \n • A structured graduate development programme with dedicated mentoring.\n, • Clear progression opportunities and support towards professional accreditation.\n, • Exposure to a wide variety of high-profile projects across multiple sectors.\n, • Ongoing technical and professional training.\n, • A collaborative and supportive team environment.\n, • Competitive salary and comprehensive benefits package.\n, • The opportunity to build your career with a recognised industry leader that invests in its people.\n \n \n Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role. \n

Air Personnel are delighted to support their client for the role of Head of FBO Aviation Security based at Glasgow. We are seeking an experienced and driven Head of FBO Secruity to take ownership of aviation security operations across our Fixed Base Operation (FBO) sites in Glasgow and Jersey. This is a pivotal role responsible for the operational delivery, training, compliance, and strategic development of our aviation security (AVSEC) function. You will ensure full compliance with the UK National Aviation Security Programme (NASP), oversee the implementation and continuous improvement of our Aviation Security Programme, and act as the primary point of contact for AVSEC matters with key regulatory and operational stakeholders including the CAA, Ports of Jersey, and AGS Ltd. This is an exciting opportunity to lead a growing security programme and influence best practice, training, and quality assurance across our network, while contributing to Aviation’s high standards in service delivery and regulatory compliance. Responsibilities: · Responsible for managing and coordinating Aviation FBO AVSEC operational activities, maintaining compliance with the UK NASP · Providing AVSEC certified training across the network (Glasgow and Jersey) delivering the relevant modules for GSO and GSS certification · Ensuring adherence to existing standard operating procedures (SOPs) as contained in the Aviation Security Program (ASP) and make amendments to these SOPs as required due to operational / regulatory changes · Ensuring compliance with the UK NASP through robust quality assurance practices currently in place as well as performing audits of activities as they relate to the relevant chapters of the NASP · Owning the relationship and stakeholder engagement (as it relates to AVSEC) with the CAA, Ports of Jersey and AGS Ltd Principal Accountabilities: · To ensure all AVSEC activities, procedures and policies are carried out in accordance with the latest CAA regulations and ensure compliance · Maintenance of the Aviation Airport Security Program (ASP) and ensure officers adhere to SOP’s, appearance standards and expected behaviours · Advise and guide the team to maximise co-operation leading to enhanced efficiency and effectiveness of the operation · Lead and work together with other departments to ensure our customers receive a high standard of service · Maintain robust systems to ensure; All paperwork and administrative duties are completed and audited in a timely manner and relevant information is forwarded where appropriate Compliance with all CAA, and HSE procedures, keeping fully updated with changes to procedures or new procedures Consistence of operational performance, by reviewing, revising, implementing practices and liaising with FBO staff Oversight and assurance program to be maintained Ongoing compliance and competence of FBO staff (as they relate to security) Amendments Standard Operating Procedure for Security as required Skills, Qualifications and Experience required: Essential: · Experience in working within a regulated aviation security environment and a managerial level providing tactical and operational support to a diverse team of operators who manage various operations across a spectrum of internal and external stakeholders · Familiar with both Aviation Security and Aviation Safety legislation and best practises · Ability to create workable plans for the wider team to deliver on · Able to deliver a 5-star service to both internal and external stakeholders · Willingness to be flexible to meet the demands of both the operation and our clients · Able to support and guide a team during times of high stress situations whilst dealing with multiple operational situations · Confident communicator able to tailor the message tone and method depending on the audience · Hold (or has held) an Aviation Security Managers (ASM) Certificate Desirable: · Level 3 Award in Education and Training · Recognition of firearms and explosives (RFX) Additional Information: Our checks include: A Criminal Record Check, 5 years employment history and Counter Terrorism Check. You will also be required to attend a face-to-face interview appointment where certain assessments will take place Due to the nature of our security checks. we are unable to consider any applications from candidates who have not lived in the UK for the last 3 years If you would like further information please apply with your CV

Description Who are we? Dnata is one of the world’s largest air and travel services providers. We provide a comprehensive range of inflight catering, onboard retail, supply chain and logistics services at all major and regional airports across the UK. Dnata Catering provide expertly crafted inflight catering services, delivering fresh and high-quality meals at major and regional airports across the UK. As the leading Halal caterer in the UK, we also provide tailored experiences to meet each customer’s unique needs. We’re a leader in VIP catering, offering bespoke inflight to private and charter clients. The Role The Operational Supervisor is responsible managing equipment operations, ensuring efficiency, safety compliance, and team productivity. The supervisor ensures quality control, inventory management, and coordination with various departments to meet operational demands. Key Responsibilities Oversee key production areas such as our bond, warehouse and production department. Ensure smooth, efficient workflows that meet tight schedules and uphold our 5-star quality standards Lead, coach, and inspire your team to deliver exceptional results every day Maintain compliance with legislation, customer expectations, and company policies Build strong relationships with clients and swiftly resolve any operational issues Skills, Knowledge and Expertise A self-starter with a sharp eye for detail and a methodical mindset Passionate about team development and operational excellence Calm under pressure and confident in a dynamic, shift-based environment Committed to delivering world-class service—every time Problem solving skills. Stakeholder management. Computer literate - Microsoft Outlook, Word and Excel Evidenced people management experience e.g. dealing with performance issues, holidays, rosters and absence management An understanding of cost and control management Attention to detail and accuracy Good organisation skills and flexibility Benefits What's in it for you? An opportunity to be part of the Emirates global family. Free breakfast, lunch and dinner on site Free tea and coffee Simply health Plan Refer a Friend Scheme Discounted gym membership at over 2000 gyms nationwide Cycle to Work Scheme Opportunity to enhance your learning through our inhouse apprenticeship programme If you're invited to interview, please let us know if there are any adjustments we can make to ensure you're cleared for take-off and able to perform at your best. We’re committed to making the recruitment journey as smooth and inclusive as possible

HVAC Service Engineer Location: Central Belt, Scotland Salary: £46,000 per annum Job Type: Full-time Work Location: Field-based / On the road The Opportunity We are looking for an experienced HVAC Service Engineer to join a specialist team working across commercial and industrial sites throughout the Central Belt of Scotland. You will be responsible for planned and reactive maintenance, fault finding, servicing and repairs across a wide range of HVAC and air conditioning systems. You will also have the opportunity to support project-related works and work within technically advanced facilities. This is an excellent opportunity for an engineer with strong technical skills who takes pride in delivering high-quality workmanship and excellent customer service. What You’ll Be Doing Carry out planned preventative maintenance (PPM), servicing and repairs on HVAC and associated mechanical systems. Respond to reactive maintenance call-outs, diagnosing faults and resolving issues efficiently. Service and maintain commercial air conditioning systems, including VRV/VRF, split and multi-split systems. Undertake electrical and mechanical fault finding, diagnostic testing and remedial works. Complete routine inspections and identify potential issues before equipment failure occurs. Work on HVAC controls and control systems, providing effective technical solutions. Maintain accurate service reports, maintenance records and job documentation. Ensure all work complies with health and safety legislation, company procedures and industry best practice. Maintain strong relationships with customers through professional communication and high-quality service. Support project-related works and participate in an out-of-hours on-call rota when required. What We’re Looking For Proven experience in commercial HVAC and air conditioning maintenance, servicing and fault finding. Valid F-Gas Category 1 certification. Strong experience with VRV/VRF, split and multi-split systems. Experience with manufacturers such as Daikin, Mitsubishi Electric and Mitsubishi Heavy Industries. Strong electrical fault-finding skills and a good understanding of HVAC controls. Experience using Service Checkers or a similar field service management system. Relevant health and safety training and a good understanding of safe working practices. Full UK driving licence and willingness to travel across the Central Belt, including occasional overnight stays. Strong communication, organisational and customer service skills, with the ability to work independently and as part of a team. NVQ Level 2/3, City & Guilds or equivalent qualification in Refrigeration, Air Conditioning, HVAC or Mechanical Engineering would be advantageous. Experience with chillers, heat pumps, refrigeration systems, DX close-control units, AHUs and BMS would be advantageous. IPAF/PASMA certification, or the ability to obtain these, would be advantageous. What’s on Offer £46,000 salary 31 days’ holiday, inclusive of public holidays Annual performance-related bonus Company pension and life insurance Employee discounts and referral programme Ongoing training and development Apply If you’re an experienced HVAC Service Engineer looking for a varied role with excellent development opportunities and the chance to work on complex commercial and industrial systems, we’d like to hear from you

Role Purpose Install, test, commission, and maintain Solar PV, Battery Storage, EV Charging, and Air Source Heat Pump (ASHP) electrical systems across domestic, commercial, and social housing projects. Ensure all work meets industry regulations, safety standards, and company quality requirements. Key Responsibilities Install and commission Solar PV, battery storage, EV charging, and ASHP electrical systems. Carry out consumer unit upgrades, electrical modifications, testing, inspection, fault finding, and certification in line with BS 7671. Complete installation documentation, job cards, test certificates, and photographic evidence using company systems. Ensure compliance with BS 7671, MCS, PAS 63100, G98/G99, and Health & Safety requirements. Liaise with project teams, office staff, and customers to ensure successful project delivery. Supervise labourers on site and promote safe working practices. Participate in training, toolbox talks, and continuous improvement initiatives Essential Qualifications & Experience NVQ Level 3 Electrical Installation (or equivalent). 18th Edition Wiring Regulations. Inspection & Testing qualification (C&G 2391 or equivalent). Solar PV, Electrical Energy Storage, and EV Charging qualifications. ECS/JIB Gold Card. Minimum 3 years' electrical installation experience. Strong knowledge of BS 7671 and safe isolation procedures. Full UK driving licence. Good communication skills and the ability to use tablets for digital job records Desirable but not essential Manufacturer training (e.g. FoxESS, SolaX, Fastensol). Experience with renewable energy installations in social housing/RSL programmes. * Knowledge of G98/G99 grid connections and renewable energy compliance To apply please call the Glasgow office on (phone number removed) - Lisa on (phone number removed)

Territories: Scotland & North East South West & West Midlands Salary: £40,000 Basic + Uncapped Bonus (OTE £50,000+) + Company Vehicle + Benefits The Company Our client is a well-established manufacturer with an excellent reputation for supplying premium-quality professional tools.. Their product portfolio is trusted across the automotive, industrial, construction and maintenance sectors, with products distributed through a network of specialist distributors, merchants and trade partners throughout the UK and internationally. Due to continued growth, they are looking to appoint two Business Development Managers to strengthen their UK sales team. The Role You will be responsible for developing sales across your designated territory, managing both existing accounts and identifying new business opportunities. The role involves selling a comprehensive range of professional tools and equipment including: Hand tools Tool storage solutions Sockets, bits and drivers Pneumatic (air) tools Measuring equipment Complete tool systems Your customer base will include: Specialist tool distributors National and independent merchants Buying groups Industrial end users Approximately 30% of your time will be spent developing relationships with end users to help drive demand through the distribution network. The Person We are particularly keen to speak with candidates who have experience working with, or selling into, specialist tool distributors and already possess strong industry contacts. Applications are also welcomed from individuals with experience selling professional tools through merchants or industrial distribution channels. You will be: A proven field sales professional Commercially driven with strong business development skills Comfortable managing an established territory while generating new business Able to build long-term relationships with distributors and end users alike Self-motivated and organised Package Basic Salary: £40,000 Monthly commission (typically £600-£900 per month) Quarterly bonus * OTE £50,000+ If you’re an ambitious sales professional with experience in the professional tools or industrial distribution sector, this is an excellent opportunity to join a respected international manufacturer with genuine opportunities for long-term career development

A career without limitsAs the nation’s flag carrier, we take great pride in connecting Britain with the world and the world with Britain.It’s something we’ve been doing for over 100 years, ever since we launched the world’s first international scheduled air service between London and Paris.This originality has been in our blood since day one. It’s the spirit we share with the people that fly with us, our partners, and our colleagues.So, whether you are a reassuring voice on the end of a phone, a smile at the door, under a wing keeping the turbines spinning or landing us gently in far-flung places, a job at British Airways is yours to make.We know great things can happen when you’re inspired to think big and bring your ambition to work every day, which is why, at British Airways the sky is never the limit.The role: Maintenance Team Leader (UK CAA B2)An opportunity has arisen for a Maintenance Team Leaders (MTL) at B2 level, working within the Production team at British Airways Maintenance Glasgow. The role of MTL is to lead, and supervise maintenance teams carrying out scheduled maintenance tasks, inspections, and defect rectification. The MTL is responsible for the day-to-day management and supervision of their teams as well as looking after the development of the team.What you’ll doTeam compliance with environmental, quality, health and safety and housekeeping standardsMaintenance oversight of individual and team activities ensuring compliance with safety, regulatory and company standardsCollaborates with colleagues, Shift manager and support department to achieve the targets for the departmentOrganise and agree team work schedule and allocate tasks to deliver areas to agreed targetsPeople management of the team IAW policies (e.g. disciplinary)Individual coaching, performance management and development (e.g. one to ones)Works to improve schedules and aircraft downtimesProvide technical leadership of teams maintenance tasks.Sign off work on completion within the full scope of individual approvalEffective communications within the organisationDeliver departmental productivity and cost targets by driving improvement to work tasks, processes and work environment.What you will bring to BAMGGood technical decision makingGood leadership and people skillsGood analytical and problem solving skillsEffective communicator at all levels within the organisationPC literate, can work with engineering systems and document management systemsCan work 4-on-4-off shifts (including night shifts)Can work in confined spaces as required (fuel tanks)Can work under pressure to timescalesYour ExperienceValid UK CAA Part 66 B2 licence (Essential)Maintains Base Maintenance authorisations on type A320 family and recency required (Essential)Type rating Airbus A320 Neo family and recency (Desirable)Experience in leading teams in an aircraft maintenance environment (Essential)3 years aircraft maintenance experience (Essential)Please upload a complete copy of your UK CAA B2 licence in the Supporting Files section of the application form.BenefitsAt British Airways we offer a wide range of flexible benefits such as:A competitive performance-related bonusA comprehensive shift allowance package paid in addition to basic salary depending on day shift/night shiftA pension scheme with potential contributions of up to 16% (if you contribute 5%, BA will contribute 11%)A private healthcare schemeA flexible benefits scheme which gives you the option to buy from a range of benefits such as life assurance, and critical illness coverDiscounted confirmed flights for friends and family on BA from date of joiningOnce in role, access to standby flights (with eligibility for the Club cabin) for yourself and your nomineesDiscounted standby travel on other airlines in the Oneworld AllianceDiscounts on car hire, hotels, leisure activities, entertainment and much moreInclusion & DiversityWe recognise that all our colleagues are uniquely different and bring their own originality, creativity, and identity to work. We encourage people from all backgrounds to be part of our journey to become a Better BA.SponsorshipAt present, British Airways Maintenance Glasgow are not able to offer sponsorships for this role.Candidates must have a Right to Work and live in the United Kingdom to be considered for this position.

Principal Robotics Architect | Hardware Abstraction | Embedded C++ | ROS2 Specialist. Location: Glasgow Workstyle: Hybrid Reports to: CTO About Chemify: Chemify is revolutionising chemistry. We are creating a future where the synthesis of previously unimaginable molecules, drugs, and materials is instantly accessible. By combining AI, robotics, and the world’s largest continually expanding database of chemical programs, we are accelerating chemical discovery to improve quality of life and extend the reach of humanity. Our newly opened Chemifarm facility in Glasgow operates a growing fleet of advanced robotic systems that automate synthesis, optimisation, and library generation. As we scale up to globally distributed facilities, we are undertaking a foundational transformation of how software and hardware interact across our platform. The Role We are seeking a Principal Robotics Architect to lead one of the most critical technical evolutions in Chemify’s history. Sitting within the Office of the CTO, you will act as the architectural bridge between Hardware Engineering and Software Engineering, shaping how our robots, control systems, and cloud services work together as a coherent whole. Your mission is to define a robust Hardware Abstraction Layer (HAL) that enables our universal chemical code (xDL) to run reliably across multiple generations of robotic platforms. You will help transform our systems from bespoke scientific instruments into intelligent, safe, and continuously updatable edge computing platforms that can operate at scale. If you enjoy problem solving complex technical challenges that blend system architecture, embedded engineering, distributed systems, and strategic leadership, are a natural communicator and are energized by working closely with scientists using cutting edge technologies, then we’d love to welcome you to our team. Key Responsibilities Architect the Hardware Abstraction Layer (HAL) • Define a clear, contract-first architecture that cleanly separates responsibilities between cloud services and embedded control systems., • Design a resilient, event-driven control backbone (NATS/MQTT) capable of supporting real-time operation across a distributed fleet of robotic platforms., • Move the intelligence to the edge. Establish a principled division between cloud-level intent and edge-level execution, ensuring predictable and safe behaviour even under network latency or connectivity constraints. Drive Software-Defined Robotics • Lead the design of edge-first safety systems, where critical thermal, pressure, and operational limits are enforced close to the hardware., • Develop high-fidelity simulation and digital twin capabilities, allowing large-scale testing and validation of chemical workflows before any physical execution., • Modernise embedded engineering practices across the organisation, including secure firmware delivery, structured testing, over the air updates (OTA) and hardware-in-the-loop (HIL) Ci/CD pipelines. Shape Technical Strategy • Work closely with Hardware, Software, and Scientific teams to align architecture with both near-term delivery and long-term platform scalability., • Influence technical roadmaps, standards, and architectural decisions across the organisation., • Serve as a technical leader and mentor, raising the bar for system design, reliability, and safety across Chemify. About You You are a rare hybrid: equally at home deep in embedded C++ as you are designing distributed systems that span edge devices and cloud infrastructure. You understand that in robotics, reliability and latency are not just performance concerns — they are fundamental safety constraints. We expect you to bring: • Embedded Mastery: 8+ years of C/C++ in safety-critical or physically consequential domains such as robotics, automotive, aerospace, or industrial automation., • Strong systems thinking: Demonstrated experience designing clear boundaries between edge devices and cloud services in complex, real-world systems., • Robotics middleware experience: Familiarity with modern robotics or real-time control frameworks and patterns (ROS 2 or DDS-base systems)., • Distributed systems: Expert-level knowledge of Python, REST, GraphQL, gRPC, protobuf, Docker, Ansible and message buses (NATS, Kafka or RabbitMQ)., • Architectural judgement: The ability to make principled trade-offs between performance, safety, maintainability, and scalability., • Collaborative leadership: You can align chemists, mechanical engineers, and software engineers around a shared technical vision and practical path forward. Why Join Chemify? Impact: You will help build the infrastructure that enables digital chemistry at scale — accelerating discovery, improving reproducibility, and unlocking new possibilities in science and medicine. Autonomy: Reporting directly to the CTO, you will have meaningful influence over the technical direction and architectural strategy of a Series B deep-tech rocket ship. Ambition: We are scaling rapidly, investing in world-class infrastructure, and tackling problems that sit at the frontier of robotics, AI, and chemistry. You will have the resources and mandate to build the right foundations for the future. Principal Architect – Robotics & Hardware Abstraction #J-18808-Ljbffr

Job Title: Area Sales Manager Boilers & Renewables. The role of the Area Sales Manager Boilers & Renewables will involve:. Field sales position selling a high quality manufactured range of water heating systems such as boilers, renewables, heat pumps, cylinders, biomass boilers and air heaters.

Job: Mechanical Auxiliary Engineer Company: BAE Systems Hourly Rate: £46.01 PAYE or £62.06 Umbrella Location : Glasgow - 1-2 days on-site per week Contract : 12 months (Opportunity to be extended) Working Hours : 37 hours per week Key Responsibilities : Creation of Schematics, Technical Specifications, Design Calculations and General Management of Auxiliary Fluid Systems. Participate fully in developing, maintaining and modifying engineering processes and procedures in assigned areas in response to technical developments and operational need. Carry out relatively technical analyses and investigations, including evaluation and selection of technical options, and prepare reports with suggested recommendations to support the resolution of problems and the improvement of engineering capability. Prepare specifications, develop designs in line with specifications and all quality and technical standards, and carry out design appraisals in assigned areas to ensure all standards are maintained. Carry out investigations into operational problems or developments and develop and prepare solutions, individually or as a member of a project team. Skills & Qualifications : Degree qualified in a Marine Engineering related discipline. Chartered Engineer or working towards it, as a minimum should be Incorporated Engineer and Member of an appropriate Institute. Experience in Mechanical Systems for marine applications. If you would like to be considered for this role please don't hesitate to click apply or call Sam Pierre-Louis on 0161 383 8022 for more information. About BAE: BAE Systems is a leading global defence, aerospace, and security company. They're experts in delivering advanced solutions for air, land, and naval forces, as well as commercial aerospace and cyber security. Known for its commitment to innovation and excellence, BAE Systems offers exciting career opportunities for those looking to make a significant impact in cutting-edge technology and defence sectors. Inclusion statement Outsource UK is committed to creating a diverse environment and is proud to be an equal opportunity employer. You'll receive consideration for your application without regard to race, religion or belief, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age. TPBN1_UKTJ

For over 140 years our products have helped ensure the safe, reliable operations of key industries. With a passion for precision and partnership, Celeros Flow Technology continues this heritage of high performance and dependability, providing mission critical, sustainable flow control solutions for our customers around the globe. Celeros Flow Technology is looking for individuals with a voice and a vision. We embrace change, diversity and promote new ways of looking at old ideas. We seek talented professionals to join our world-class team of innovators in a global, collaborative & multi-cultural environment, where you will be challenged, supported, and inspired to be extraordinary. GENERAL SUMMARYThis key Manufacturing Engineer role will support CNC machining operations across our Glasgow facility. Working closely with Production Engineers, the Industrial Engineer and the machine shop, the Manufacturing Engineer will be responsible for reviewing, developing, and improving manufacturing processes. This includes assisting with tooling and work-holding requirements, supporting CNC programming activities, providing technical support, and identifying opportunities to improve efficiency. This role is ideal for someone with a strong CNC machining or programming background looking to develop their career within Manufacturing Engineering. Whether already working as a Manufacturing Engineer or are an experienced CNC Programmer looking to take the next step, we would like to hear from you. This is an excellent opportunity to broaden your technical skills and play a key role in supporting a modern CNC machining facility. Experience of Mazatrol is highly desirable, whilst experience of Siemens and Heidenhain controls would also be beneficial. Experience of offline programming using Siemens NX CAM would be advantageous but is not essential. For candidates with the right skills and desire to learn, training and development can be provided to support their progression within the role. PRINCIPLE DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS)Support CNC machining operations across a range of Mazak, Siemens and Heidenhain controlled machine tools.Review manufacturing workload and provide day-to-day technical support to production.Create, edit and optimise CNC programs where required.Review machining methods to improve quality, efficiency and productivity.Work alongside the Industrial Engineer to identify and implement suitable tooling, work holding and manufacturing solutions.Support Production Engineers by reviewing manufacturing methods and standard machining times to help improve planning accuracy.Prepare and maintain manufacturing documentation including setup information, tooling requirements and machining methods.Provide technical support to CNC operators and machinists, assisting with manufacturing issues as they arise.Identify opportunities for continuous improvement using Lean Manufacturing principles.Support the introduction of new products and manufacturing processes into production.Assist with non-conformance investigations and process improvements where required.Support continuous improvement activities aimed at reducing manufacturing costs, improving quality and increasing productivity. Always Work safely whilst following company Health, Safety and Environmental procedures.Be willing to undertake further training and development where required.Work with managers and cell leaders to implement the companys policies and goals.Ensure that health, safety and environmental guidelines are followed. EDUCATION AND EXPERIENCEEssentialHNC/HND in Mechanical Engineering or equivalent practical experience.Strong knowledge of CNC machining processes, including milling and/or turning.Experience programming or supporting CNC machine tools.Ability to read and interpret engineering drawings.Good communication and problem-solving skills.A proactive approach to supporting production and driving improvements.DesirableExperience of Mazatrol programming.Experience of Siemens and/or Heidenhain controls.Previous Manufacturing Engineering experience.Experience of offline CAM programming (Siemens NX preferred).Experience of SAP or other MRP systems.Knowledge of Lean Manufacturing and Continuous Improvement techniques. YOU MUST HAVE VALID RIGHT TO WORK IN THE UK AND BE ABLE TO OBTAIN SECURITY CLEARANCE TO APPLY FOR THIS ROLE. BENEFITSCompetitive salaryOpportunities to developBonus33 days holiday (inclusive of bank holidays)Holiday buy and sellPensionLife CoverEmployee Assistance ProgramDigital Benefits; Health, Wealth & Lifestyle PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Required daily to stand, sit, walk, talk, hear, and see (specific close vision abilities are required to perform computer work)Required occasionally to stoop, kneel, crouch and crawlRequired daily to use hands and fingers and arms to reach (to operate a computer and telephone)Required occasionally to lift and/or move objects that are light to moderateRequired occasionally to travel (usually by air or road so may be required to sit for extended periods) WORKING CONDITIONSThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Ability to work with moderate noise (i.e. business office with computers, phone, and printers, etc.)Ability to work in an open planned office / individual officeAbility to sit at a computer terminal for extended periodsAbility to sit in a car or on a plane for extended periods DISCLAIMERThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. CELEROS FLOW TECHNOLOGY VALUESAll Celeros divisions are committed to the effective use of the Celeros Values. It is important that all employees understand and utilize these values when performing the duties of his/her position.INTEGRITY: We work safely and respect our employees, business partners & environment. We always lead by example.SPEED: In our mission to bring mission-critical flow control equipment to the world, energy in our actions & urgency.ACCOUNTABILITY: We stand behind our actions and deliver on our promises.PARTNERSHIP: We collaborate across our teams & our customers to win together. We rely on each other to deliver the best outcome & celebrate successes.EXCELLENCE: We are passionate about being the best at engineering, manufacturing & maintaining mission-critical equipment. We seek quality & community improvement in every interaction. QUALITYQuality encompasses all aspects of Celeros’ business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process and the quality system. All employees have an obligation to identify and record any such nonconformity, and through designed channels, initiate and recommend solutions. CELEROS Flow Technology is an equal opportunity employer.

Our client is a well-established engineering and building services company with a strong reputation for delivering high-quality HVAC maintenance and engineering solutions across commercial and industrial environments. Air Conditioning Engineer - Central Belt - Salary up to £45,000 DOE. Due to conti

Job Title: Asbestos Surveyor Analyst Location: Glasgow Penguin Recruitment is delighted to be supporting a well-established UKAS-accredited asbestos consultancy in their search for an experienced Asbestos Surveyor Analyst to join their team in Glasgow. This is an excellent opportunity for a dual-qualified asbestos professional looking for a varied role covering Glasgow and the wider Central Belt. The successful candidate will undertake a balanced mix of surveying and analytical duties across commercial, industrial, education, healthcare, residential, and public sector properties. You'll benefit from a structured workload, strong operational support, and genuine opportunities for long-term career development within an established consultancy. What You'll Be Joining You'll be joining a respected asbestos consultancy with an established client base across Scotland. The company places a strong emphasis on technical quality, compliance, realistic workloads, and supporting the continued development of its employees. Salary & Benefits Competitive salary Company vehicle provided Company pension scheme Overtime opportunities available Ongoing training and professional development Structured and manageable workload Varied projects across the Central Belt Long-term career progression opportunities Permanent, secure position The Role Carrying out Management and Refurbishment & Demolition (R&D) asbestos surveys in accordance with HSG264 Undertaking air monitoring and four-stage clearances in accordance with HSG248 Carrying out reassurance, leak, background, and personal air testing Conducting bulk asbestos sampling across a variety of property types Producing accurate and compliant asbestos survey and analytical reports Working across commercial, industrial, education, healthcare, residential, and public sector sites Managing your own diary and workload effectively Liaising professionally with clients, contractors, and internal teams Ensuring all work complies with current asbestos legislation, HSE guidance, and UKAS procedures About You BOHS P402, P403 and P404 qualifications (essential) Previous experience working as an Asbestos Surveyor Analyst Strong understanding of HSG264, HSG248, and current asbestos legislation Experience working within a UKAS-accredited consultancy is desirable Confident managing a field-based workload independently Strong communication and report-writing skills Full UK driving licence Professional, organised, and reliable approach to work Why This Role Genuine dual surveying and analytical position Varied workload across Glasgow and the Central Belt Structured scheduling and strong operational support Ongoing technical development Excellent long-term career progression opportunities Permanent position within an established consultancy If you are interested in this role, contact Joel Bland on (phone number removed) or email

Refrigeration Engineer (Industrial & Commercial) Full-time | Mobile Role | Central Belt Scotland At Elite Cooling Services (ECS), we specialise in delivering high-quality refrigeration and engineering solutions to the FMCG and industrial sectors. As a growing and forward-thinking business, we pride ourselves on reliability, technical expertise, and building long-term partnerships with our clients. We're now looking for a skilled Refrigeration Engineer to join our team—someone who can install, maintain, and repair commercial and industrial refrigeration systems while delivering exceptional service to our customers. This is a varied, hands-on role offering stability, career development, and the opportunity to work with a close-knit team across a wide range of customer sites and projects throughout Scotland's Central Belt. What you'll do: • Carry out the installation, servicing, maintenance, and repair of commercial and industrial refrigeration systems, • Diagnose and resolve mechanical and electrical faults efficiently to minimise downtime, • Work on a variety of refrigeration and cooling equipment, including walk-in cold rooms, freezer stores, display cabinets, chillers, and air conditioning systems, • Perform planned preventative maintenance (PPM) and routine inspections, • Identify potential issues before they become major failures, helping customers maximise equipment reliability, • Support installation, commissioning, and upgrade projects across multiple sites, • Communicate professionally with customers, providing technical advice and recommendations, • Maintain accurate service reports and documentation, • Ensure compliance with all health & safety legislation and F-Gas regulations, • Promote a safe, clean, and organised working environment What you'll bring: • Minimum 2 years' experience working as a Commercial or Industrial Refrigeration Engineer, • Strong fault-finding and diagnostic skills across refrigeration systems, • Experience working with commercial refrigeration, chillers, freezer stores, and air conditioning equipment, • Valid F-Gas Certification (essential), • Relevant refrigeration or HVAC qualifications (City & Guilds / NVQ or equivalent), • Full UK Driving Licence, • Ability to work independently and as part of a team, • A customer-focused approach with excellent communication skills, • A proactive, safety-first mindset with strong attention to detail: What we offer: • Salary up to £52,000 DOE based on experince., • Enhanced overtime rates (1.5x), • 39-hour working week, • 28 days holiday (including public holidays), • Company pension scheme, • Company vehicle and fuel card, • On-site parking, • Career progression opportunities, • Opportunity to work on new projects and expanding sites

Air Conditioning Engineer - Central Belt - Salary up to £45,000 DOE Our client is a well-established engineering and building services company with a strong reputation for delivering high-quality HVAC maintenance and engineering solutions across commercial and industrial environments. Due to continued growth, they are looking to recruit an experienced Air Conditioning Service Engineer to join their expanding team. This is an excellent opportunity to join a forward-thinking business that invests in its people, offers genuine career progression, and provides exposure to technically interesting projects across a diverse client portfolio. Key Responsibilities: Carry out planned preventative maintenance on commercial HVAC systems. Respond to reactive maintenance call-outs and diagnose faults efficiently. Service, repair and maintain air conditioning and ventilation equipment. Undertake fault finding and complete remedial works where required. Inspect equipment to identify potential issues and recommend solutions. Complete service reports and maintenance documentation accurately. Ensure all work complies with current health and safety legislation. Build strong relationships with clients through professional and reliable service. Participate in an out-of-hours call-out rota when required.Person Specification: Essential Proven experience servicing and maintaining commercial air conditioning systems. F-Gas Category 1 Certification. Full UK driving licence. NVQ Level 2/3, City & Guilds or equivalent in Refrigeration, Air Conditioning or HVAC. IPAF and PASMA qualifications (or willingness to obtain).Salary & Benefits: Salary up to £45,000 DOE Company vehicle, tools and equipment. Company pension. Life assurance. Generous holiday allowance. Ongoing training and professional development. Genuine opportunities for career progression. Opportunity to work on a varied portfolio of commercial and industrial sites

Asbestos Surveyor / Analyst - Glasgow Location: Glasgow, Scotland Salary: £36,000 (depending on experience) Contract: Permanent | Full-time A well-established UKAS-accredited asbestos consultancy is looking to appoint an experienced Asbestos Surveyor / Analyst to support a busy and expanding workload across Glasgow and the surrounding region. This is a great opportunity for a dual-qualified professional seeking a stable role with a consistent pipeline of work and strong long-term prospects. This position offers a balanced mix of surveying and analytical duties across commercial, domestic, and public sector projects. What You'll Be Joining You'll be joining a respected consultancy known for delivering high-quality asbestos services across Scotland. The company promotes a supportive working environment, realistic workloads, and ongoing staff development. Salary & Benefits £36,000 salary Company vehicle or car allowance 22-25 days annual leave + bank holidays Company pension scheme Ongoing training and development Overtime opportunities Stable, long-term workload Supportive management team The Role Carrying out Management and Refurbishment & Demolition (R&D) asbestos surveys Undertaking air monitoring, including 4-stage clearances and reoccupation certification Conducting bulk sampling and ensuring correct procedures are followed Producing accurate, compliant reports in line with HSG264 and HSG248 Managing workload across multiple sites Liaising with clients, contractors, and internal teams About You BOHS P402, P403 & P404 (essential) Full UK driving licence Experience working as a dual Surveyor / Analyst Strong knowledge of asbestos legislation and compliance Professional, organised, and reliable Strong communication skills Why This Role Competitive salary for a dual-role position Varied workload across multiple sectors Strong benefits package Long-term stability within a growing consultancy Supportive and well-managed environment For further information or to apply, contact Aidan Morgan or send your CV to for immediate consideration

Air Conditioning Engineer - Central Belt - Salary up to £45,000 DOE Our client is a well-established engineering and building services company with a strong reputation for delivering high-quality HVAC maintenance and engineering solutions across commercial and industrial environments. Due to continued growth, they are looking to recruit an experienced Air Conditioning Service Engineer to join their expanding team. This is an excellent opportunity to join a forward-thinking business that invests in its people, offers genuine career progression, and provides exposure to technically interesting projects across a diverse client portfolio. Key Responsibilities: Carry out planned preventative maintenance on commercial HVAC systems. Respond to reactive maintenance call-outs and diagnose faults efficiently. Service, repair and maintain air conditioning and ventilation equipment. Undertake fault finding and complete remedial works where required. Inspect equipment to identify potential issues and recommend solutions. Complete service reports and maintenance documentation accurately. Ensure all work complies with current health and safety legislation. Build strong relationships with clients through professional and reliable service. Participate in an out-of-hours call-out rota when required.Person Specification: Essential Proven experience servicing and maintaining commercial air conditioning systems. F-Gas Category 1 Certification. Full UK driving licence. NVQ Level 2/3, City & Guilds or equivalent in Refrigeration, Air Conditioning or HVAC. IPAF and PASMA qualifications (or willingness to obtain).Salary & Benefits: Salary up to £45,000 DOE Company vehicle, tools and equipment. Company pension. Life assurance. Generous holiday allowance. Ongoing training and professional development. Genuine opportunities for career progression. Opportunity to work on a varied portfolio of commercial and industrial sites

Multi Skilled HVAC Engineer - Central Belt - Salary up to £46,000 DOE Our client is a well-established engineering and building services provider with an excellent reputation for delivering high-quality maintenance solutions across a wide range of commercial and industrial properties. Due to continued growth, they are looking to recruit an experienced Multi-Skilled Air Conditioning Engineer to join their expanding team. This is an excellent opportunity for an engineer who enjoys a varied role, combining specialist HVAC work with general building services maintenance. Working across a diverse portfolio of sites, you'll be responsible for planned preventative maintenance, reactive repairs, fault finding and minor mechanical and electrical works, ensuring facilities remain safe, compliant and fully operational. Key Responsibilities Carry out planned preventative maintenance (PPM) on commercial air conditioning and HVAC systems. Respond to reactive breakdowns, diagnose faults and complete repairs efficiently. Service, maintain and repair VRV/VRF, split, multi-split and ventilation systems. Undertake fault finding on HVAC controls and associated mechanical equipment. Carry out minor mechanical and electrical maintenance across commercial buildings. Complete general building services tasks, including pumps, motors, pipework, valves and basic electrical works. Identify and report remedial works, providing effective solutions where appropriate. Accurately complete service reports and maintenance documentation. Ensure all work is completed in line with health and safety legislation and company procedures. Build strong working relationships with clients by delivering a professional and reliable service. Participate in the out-of-hours call-out rota when required.Person Specification: Essential Proven experience servicing and maintaining commercial air conditioning systems. F-Gas Category 1 Certification. NVQ Level 2/3, City & Guilds or equivalent in Refrigeration, Air Conditioning or HVAC. Experience carrying out planned preventative and reactive maintenance. Strong fault-finding and diagnostic skills. Multi-skilled experience with general building services maintenance. Good understanding of mechanical and basic electrical systems. Full UK driving licence. Excellent communication and customer service skills.Desirable IPAF and PASMA qualifications (or willingness to obtain). Experience working with chillers, AHUs, FCUs, pumps, heat pumps and BMS systems. 18th Edition or other relevant electrical qualifications. Experience within commercial or industrial environments.Salary & Benefits: Salary up to £45,000 DOE Company vehicle, fuel card, tools and equipment provided. Company pension. Life assurance. Generous annual leave entitlement. Ongoing training and professional development. Genuine opportunities for career progression. Varied workload across a diverse portfolio of commercial and industrial sites

Welders Needed Are you a skilled Welder looking to join a world-class construction environment? We are seeking experienced professionals who take pride in delivering high-quality workmanship and contributing to the construction of cutting-edge vessels. What You'll Be Doing As a Welder, you will be responsible for fabricating, assembling and installing ship components while ensuring the highest standards of quality, safety and productivity. Key responsibilities include: Welding carbon steel, stainless steel and aluminium structures using a variety of welding processes: Manual Metal Arc (MMA) MIG Welding Automatic & Semi-Automatic Welding (Submerged Arc & KAT) Resistance Welding (Stud Welding)Working from welding procedures, manufacturing instructions and technical drawings Producing high-quality, right-first-time work that contributes to successful ship construction Using air and electric power tools safely and effectively Collaborating with supervisors, apprentices and other trades to overcome production challenges Essential Requirements ? Proven FCAW (Flux Core Arc Welding) experience - essential ? Ability to weld in multiple positions using a variety of consumables ? Valid welding qualifications and trade papers ? Strong understanding of: Safe working practices Welding procedures Manufacturing processes Quality standards and tolerances? Relevant safety certifications such as: IOSH Working Safely Confined Space Working at HeightWhat We're Looking For We want team players who are: Reliable and committed Quality-focused Strong communicators Practical problem solvers Willing to learn and adapt Passionate about sharing knowledge with apprentices and colleaguesWhy Join Us? You'll become part of a highly skilled team delivering complex engineering projects while developing your expertise in advanced welding techniques, shipbuilding processes and industry-leading quality standards. If you're an experienced FCAW Welder looking for your next challenge, we'd love to hear from you. Apply today or contact us for more information. #WeldingJobs #Welder #FCAW #Shipbuilding #MarineEngineering #ManufacturingJobs #SkilledTrades #EngineeringCareers #Hiring #TradeJobs #UKJobs #ProductionJobs

Job Title: Asbestos Surveyor Analyst Location: Glasgow Penguin Recruitment is delighted to be supporting a well-established UKAS-accredited asbestos consultancy in their search for an experienced Asbestos Surveyor Analyst to join their team in Glasgow. This is an excellent opportunity for a dual-qualified Asbestos Surveyor Analyst looking to join a respected consultancy delivering high-quality asbestos services across Glasgow and the wider Central Belt. The successful candidate will undertake a varied mix of surveying and analytical duties across commercial, industrial, education, healthcare, residential, and public sector properties. THE ROLE As an Asbestos Surveyor Analyst, you will be responsible for delivering both asbestos surveying and analytical services across a diverse portfolio of client sites throughout Glasgow and the surrounding areas. Working independently and alongside an experienced technical team, you will deliver accurate, professional services while ensuring full compliance with HSG264, HSG248, current asbestos legislation, HSE guidance, and UKAS procedures. KEY RESPONSIBILITIES Carrying out Management and Refurbishment & Demolition (R&D) asbestos surveys in accordance with HSG264 Undertaking air monitoring, four-stage clearances, reassurance testing, leak testing, and personal air monitoring in accordance with HSG248 Conducting bulk asbestos sampling across a range of property types Producing accurate and compliant asbestos survey and analytical reports Working across commercial, industrial, education, healthcare, residential, and public sector sites Managing your own diary and workload effectively Liaising professionally with clients, contractors, and internal teams Ensuring all work complies with current asbestos legislation, HSE guidance, and UKAS procedures WHAT WE'RE LOOKING FOR BOHS P402, P403 and P404 qualifications (essential) Previous experience working as an Asbestos Surveyor Analyst Strong understanding of HSG264, HSG248, and current asbestos legislation Experience within a UKAS-accredited consultancy is desirable Full UK driving licence Strong communication and report-writing skills Ability to work independently and manage a field-based workload Professional, organised, and reliable approach to work WHAT'S ON OFFER Competitive salary Company vehicle provided Company pension scheme Ongoing training and professional development Varied surveying and analytical workload Structured scheduling and strong operational support Permanent, long-term position Genuine opportunities for career progression If you are interested in this role, contact Joel Bland on (phone number removed) or email

NATS, a renowned organisation in the Defence & Security sector, is currently seeking a skilled Test Manager for a contract opportunity in Aberdeen. This role involves supporting the delivery of complex technical systems within a safety-critical environment, focusing on test planning, execution, defect management, quality assurance, and test assurance governance. Key Responsibilities: Lead the planning, coordination, and delivery of testing activities across new and existing technical systems. Oversee the full end-to-end test lifecycle, ensuring activities are planned, controlled, executed, and evidenced to the required standard. Provide expert direction for the test strategy, planning, estimating, implementation, and conduct of test programmes. Develop, review, and maintain test strategies, test plans, test scripts, checklists, test reports, and supporting quality assurance documentation. Define test requirements and design tests to satisfy system, safety, user, and project requirements. Ensure requirements are testable, complete, and traceable, with clear linkage between requirements, test activity, evidence, and outcomes. Support the definition of acceptance criteria and contribute evidence and recommendations to acceptance reviews or acceptance panels. Manage test execution records, including test outcomes, evidence, completion dates, tester details, defects, and recommendations. Job Requirements: Previous experience in a Test Manager, Test Lead or senior test coordination role. Strong background in test planning, test execution, test assurance, and defect management within a structured project or systems environment. Experience managing testing across the system lifecycle, including requirements review, test design, test execution, reporting, and acceptance support. Good understanding of test methodologies, quality assurance principles, systems engineering, and software testing processes. Experience working with real-time, operational or safety-critical technical systems. Experience within aviation, air traffic control, systems engineering, or another safety-critical environment. Excellent communication skills, with the ability to engage confidently with technical and non-technical stakeholders. Strong organisational skills and ability to work effectively across multi-disciplinary teams. Desirable Experience: Bachelor's degree in engineering, computing, or another relevant technical discipline, or equivalent technical experience. HNC-level qualification or higher in an engineering-related discipline would also be considered. Knowledge of radar data processing, flight data processing, voice communications, or similar operational technology would be advantageous. Knowledge of regulatory compliance environments and working to defined safety standards. Experience contributing to work package management, project reporting, resource estimates, test metrics, and assurance evidence. Experience supporting acceptance activity, acceptance criteria definition or formal system acceptance reviews