Manual jobs in Linden, New JerseyCreate job alerts

Job Title: Respiratory Therapist Reg Location: Cooperman Barnabas Medical Ctr Department Name: Respiratory Therapy Req #: 0000208663 Status: Hourly Shift: Evening Pay Range: $40.74 - $50.88 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs basic/advances therapeutic procedures as outlined under the scope of respiratory patient care service within the section of the policy procedure manual. Transcribes and implements physician orders. Uses basic oxygen advanced assessment skills and patient information to maintain awareness of patient care needs. Qualifications: Required: • Graduate of an NBRC school for respiratory care, • Successful completion of all Orientation Programs. Preferred: • Experience preferred Certifications and Licenses Required: • Registered Respiratory Therapist by NBRC, • Licensed by New Jersey State Board of Respiratory Care, • BLS Certification Required. (American Heart Association) Scheduling Requirements: • FT, • Evenings

Job Title: Respiratory Therapist Reg Location: Mountainside (MTN) Department Name: Respiratory Care Req #: 0000208848 Status: Hourly Shift: Evening Pay Range: $44.75 - $54.88 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: As a Respiratory Therapist, you will evaluate, treat, and care for pediatric patients with breathing or other cardiopulmonary disorders. Qualifications: Required: • Graduate of a Joint Review Committee for Respiratory Therapy Education approved program of Respiratory Care, • Registered Respiratory Therapist from the National Board of Respiratory Care, • NJ State Respiratory License, • AHA BLS Provider Certification Preferred: • Bachelors of Science degree Certifications and Licenses Required: • NJ State Respiratory License, • AHA BLS Provider Certification Scheduling Requirements: • Full Time – 36 hours/week, • Night Shift Essential Functions: • Must be able to work at any site when needed, • Demonstrates evidence of use of the Respiratory Therapy within time frames defined by the hospital and departmental policy, • Recognizes and accurately identifies obvious patient and family health care needs, • Plans, implements and evaluates plans of care for patients with a variety of problems. Begins to understand and implement pediatric rehabilitative rationales., • Implements appropriate and individualized patient and family education within time frames defined by hospital and departmental policies. Begins planning patient and family education, • Understands the importance of interdisciplinary process. Begins to establish his|her role as a rehab Therapist functioning in a team structure, • Promotes continuity of respiratory care and interdisciplinary interventions, • Demonstrates evidence of the ISTAT blood analysis system and follows all policies and procedures relative to the laboratory, • Recognizes and respects patient|family rights in a culturally and religiously sensitive environment of care, • Requests guidance from RCP II, RCP III, Clinical Director and other resources when appropriate, • Consistently appraises clinical performance and learning needs through self-evaluation., • Exhibits consistent professional behavior and is accountable for actions with regard to professional issues, • Serves as a role model to Respiratory students and new employees Physical Demands: • Able to lift and carry equipment and patients greater than 15 pounds or greater, • Potential for blood and body fluid splashes and exposures, • On feet most of the day; bending, walking, manual dexterity, pushing, pulling Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at anytime with or without notice. Benefits and Perks: At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance), • Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health! RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

Job Title: Respiratory Therapist Lead Location: Cooperman Barnabas Medical Ctr Department Name: Respiratory Care Req #: 0000224620 Status: Hourly Shift: Night Pay Range: $47.93 - $58.77 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs basic/advances therapeutic procedures as outlined under the scope of respiratory patient care service within the section of the policy procedure manual. Transcribes and implements physician orders. Uses basic oxygen advanced assessment skills and patient information to maintain awareness of patient care needs. Qualifications: Required: • Graduate of an NBRC school for respiratory care, • Successful completion of all Orientation Programs. Preferred: • Experience preferred Certifications and Licenses Required: • Registered Respiratory Therapist by NBRC, • Licensed by New Jersey State Board of Respiratory Care, • BLS Certification Required. (American Heart Association) Scheduling Requirements: • Nights, • Full-time Benefits and Perks: At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance), • Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health! RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

Job Title: Respiratory Therapist Reg Location: Mountainside (MTN) Department Name: Respiratory Care Req #: 0000234967 Status: Hourly Shift: Day Pay Range: $44.75 - $54.88 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: As a Respiratory Therapist, you will evaluate, treat, and care for pediatric patients with breathing or other cardiopulmonary disorders. Qualifications: Required: • Graduate of a Joint Review Committee for Respiratory Therapy Education approved program of Respiratory Care, • Registered Respiratory Therapist from the National Board of Respiratory Care, • NJ State Respiratory License, • AHA BLS Provider Certification Preferred: • Bachelors of Science degree Certifications and Licenses Required: • NJ State Respiratory License, • AHA BLS Provider Certification Scheduling Requirements: • Full Time – 36 hours/week, • Day Shift Essential Functions: • Must be able to work at any site when needed, • Demonstrates evidence of use of the Respiratory Therapy within time frames defined by the hospital and departmental policy, • Recognizes and accurately identifies obvious patient and family health care needs, • Plans, implements and evaluates plans of care for patients with a variety of problems. Begins to understand and implement pediatric rehabilitative rationales., • Implements appropriate and individualized patient and family education within time frames defined by hospital and departmental policies. Begins planning patient and family education, • Understands the importance of interdisciplinary process. Begins to establish his|her role as a rehab Therapist functioning in a team structure, • Promotes continuity of respiratory care and interdisciplinary interventions, • Demonstrates evidence of the ISTAT blood analysis system and follows all policies and procedures relative to the laboratory, • Recognizes and respects patient|family rights in a culturally and religiously sensitive environment of care, • Requests guidance from RCP II, RCP III, Clinical Director and other resources when appropriate, • Consistently appraises clinical performance and learning needs through self-evaluation., • Exhibits consistent professional behavior and is accountable for actions with regard to professional issues, • Serves as a role model to Respiratory students and new employees Physical Demands: • Able to lift and carry equipment and patients greater than 15 pounds or greater, • Potential for blood and body fluid splashes and exposures, • On feet most of the day; bending, walking, manual dexterity, pushing, pulling Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at anytime with or without notice. Benefits and Perks: At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance), • Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health! RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

Job Title: Respiratory Therapist Reg Location: Mountainside (MTN) Department Name: Respiratory Care Req #: 0000234968 Status: Hourly Shift: Night Pay Range: $44.75 - $54.88 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: As a Respiratory Therapist, you will evaluate, treat, and care for pediatric patients with breathing or other cardiopulmonary disorders. Qualifications: Required: • Graduate of a Joint Review Committee for Respiratory Therapy Education approved program of Respiratory Care, • Registered Respiratory Therapist from the National Board of Respiratory Care, • NJ State Respiratory License, • AHA BLS Provider Certification Preferred: • Bachelors of Science degree Certifications and Licenses Required: • NJ State Respiratory License, • AHA BLS Provider Certification Scheduling Requirements: • Full Time – 36 hours/week, • Night Shift Essential Functions: • Must be able to work at any site when needed, • Demonstrates evidence of use of the Respiratory Therapy within time frames defined by the hospital and departmental policy, • Recognizes and accurately identifies obvious patient and family health care needs, • Plans, implements and evaluates plans of care for patients with a variety of problems. Begins to understand and implement pediatric rehabilitative rationales., • Implements appropriate and individualized patient and family education within time frames defined by hospital and departmental policies. Begins planning patient and family education, • Understands the importance of interdisciplinary process. Begins to establish his|her role as a rehab Therapist functioning in a team structure, • Promotes continuity of respiratory care and interdisciplinary interventions, • Demonstrates evidence of the ISTAT blood analysis system and follows all policies and procedures relative to the laboratory, • Recognizes and respects patient|family rights in a culturally and religiously sensitive environment of care, • Requests guidance from RCP II, RCP III, Clinical Director and other resources when appropriate, • Consistently appraises clinical performance and learning needs through self-evaluation., • Exhibits consistent professional behavior and is accountable for actions with regard to professional issues, • Serves as a role model to Respiratory students and new employees Physical Demands: • Able to lift and carry equipment and patients greater than 15 pounds or greater, • Potential for blood and body fluid splashes and exposures, • On feet most of the day; bending, walking, manual dexterity, pushing, pulling Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at anytime with or without notice. Benefits and Perks: At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance), • Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health! RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

Job Title: Resp Therapist Certified Location: Cooperman Barnabas Medical Ctr Department Name: Respiratory Care Req #: 0000236963 Status: Hourly Shift: Day Pay Range: $43.61 - $53.49 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs basic/advances therapeutic procedures as outlined under the scope of respiratory patient care service within the section of the policy procedure manual. Transcribes and implements Physician orders. Uses basic oxygen advanced assessment skills and patient information to maintain awareness of patient care needs. Qualifications: Required: • Graduate of a National Board for Respiratory Care (NBRC) School for Respiratory care Certifications and Licenses Required: • Certfied Respiratory Therapist, • BLS certification required (American Heart Association)., • Licensed by New Jersey State Board of Respiratory Care., • Successful completion of all orientation programs Scheduling Requirements: • Days, • FT

Job DescriptionApprentice HVAC Service Technician ???? We invite full-time Apprentice HVAC Service Technicians to join our customer-obsessed team in Union, NJ. You will be a full-time student in the Service Professionals HVAC Academy for the Fall 2026 Class, beginning mid-September and lasting for 4 months. At graduation, you will become a maintenance technician and qualified to run calls on your own. Who We Are Service Professionals is on a mission to create remarkable experiences that leave our customers giving us their enthusiastic "Thumbs Up!" This isn't just a goal - it's our promise. We do more than just fixing plumbing, heating, cooling, and electric issues. We consider our job incomplete until we see their thumbs up high in approval. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We are building a culture that values collaboration. We offer strong compensation packages, uncapped performance-based bonuses, and exceptional training programs. These have the potential to be life-changing opportunities for driven professionals. ????Paid to Study: We pay you $16/hour to attend our full-time classes, on-site at our headquarters. ????️ Cutting-Edge Tech: We invest in the tech to make your job easier, more efficient, and, most importantly, more enjoyable. ???? Recognition and Rewards: Hard work won't go unnoticed. We recognize and celebrate your achievements, both financially and culturally. ???? Room for Growth: You're not just another number; you're a person with ambitions. We offer pathways for true career development. ???? Inspiring Work Environments: We understand and respect that life…happens. We take care of our people and support them on their life journeys. Who You Are This will be an exceptional opportunity for you if you have the following skills & experiences. If you don’t - you can still apply and learn them with us! ⛏️ You like getting your hands dirty. ???? You embrace technology. ???? You avoid shortcuts when nobody is watching. ???? You make people feel comfortable. You are the kind of person that anyone would send to their own mother’s house, without any concerns. People love having you around and value your advice. ???????? You are physically up to the task! This is a demanding job that requires hard, manual labor. ???? Fluency in English required. What Will You Do? You will be attending trainings led by our in-house trainer, following a defined curriculum. Attendance will be strictly monitored. We expect you to develop the skills required to diagnose and repair residential HVAC systems, leading customers to informed and confident buying decisions. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions - All Trades and Warehouse Departments To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team!

Job DescriptionTitle: Production Assistant Reports To: General Supervisor, Production Supervisor, Administrator, or Director of Business Status: Non-exempt Function: The Production Assistant will complete driving routes for pickup and/or drop off of donations at the warehouse, assigned donation boxes, and donor homes. Duties and Responsibilities: 1. Responsible for the security and safe operation of the vehicle and other assigned equipment. Promptly report, to immediate supervisor, all accidents involving truck, personal injury, or property damage and complete all necessary paperwork. 2. Perform daily walk around inspection of vehicle, checking air, water, oil and other items to maintain equipment in good operating condition. Report any problems immediately to the supervisor. 3. Ensure truck cab and box are clean and personal items are removed daily. 4. Plan daily routing based on pick-ups assigned and make all calls scheduled, including boxes. 5. You are a personal representative of The Salvation Army. a) You are therefore to ensure that all customers are treated courteously, donations are accepted or refused appropriately, and the “Manual for Production Assistants” is strictly followed. Any problem in pickups should be reported immediately to the dispatcher. b) Required to maintain a professional appearance in compliance with company dress code. 6. Maintain complete and accurate records. 7. Must adhere to communication procedures.8. Responsible for loading and unloading of truck assigned and others as requested. Take proper care to secure and safely handle goods and materials during loading and unloading. Blankets, ropes, etc., are to be used to: a) Avoid excessive movement of material during transit. b) Avoid breakage, scratching, or other damage. c) Make optimum use of available space. 9. Provide assistance to Thrift Store personnel when delivering items to ensure proper placement and location within the store (i.e. hampers to processing area, furniture placed properly on sales floor, removal of trash, etc.). 10. Instruct and supervise Truck Helper. Keep in mind that the Truck Helper is in a rehabilitation program and that good habits are taught by example as well as instruction. 11. This position will support the work therapy program component of The Salvation Army Adult Rehabilitation Centers by providing beneficiaries with an example of professional conduct and work habits. Production Assistant (non-CDL) rev 10.12.23 2 The Salvation Army Adult Rehabilitation Centers.12. Other duties as assigned by immediate supervisor and/or Administrator. Qualifications: 1. Must be able to communicate effectively. 2. Valid driver’s license for assigned vehicles and acceptable DMV record. Must pass driving test. 3. Must be able to read maps and plan and prioritize daily route coverage.4. Must be able to use iPad with GPS, texting, and truck inspection report.5. Must have good communication and customer service skills. 6. Medical card required depending on city and/or state requirement. 7. Passing a DOT Physical is a requirement of the job, and failure to do so could result in immediate termination of employment. Physical Requirements Sitting Lifting Over 1/3 of the time Must be able to lift 75 pounds Push/Pull Using Machinery Standing Yes Over 2/3 of the time Walking Reaching Over 2/3 of the time Over 2/3 of the time Climbing Stooping Under 1/3 of the time Under 1/3 of the time Statement of Confidentiality. Other Description:The Production Assistant (non-CDL) occupies a position of trust and is expected to maintain confidentiality and exhibit loyalty to The Salvation Army and the staff of the Adult Rehabilitation Centers in all job-related matters. Mission Statement:The Salvation Army, an international movement, is an evangelical part of the universal Christian church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the gospel of Jesus Christ and to meet human needs in His name without discrimination.

Job Description Job description: Overview We are seeking a dedicated and skilled Tow Truck Driver to join our team. The ideal candidate will possess a strong commitment to customer service and safety, with the ability to operate various types of tow trucks, including flatbed models. This role requires mechanical knowledge and the capability to perform automotive diagnostics, ensuring that vehicles are handled with care and expertise. Duties • Safely operate tow trucks to transport vehicles to designated locations., • Perform vehicle loading and unloading with precision, ensuring no damage occurs during the process., • Conduct basic automotive diagnostics and repairs as needed., • Provide excellent customer service by communicating effectively with clients regarding their vehicle issues and towing needs., • Maintain a clean and organized work environment, including regular inspections of the tow truck for safety compliance., • Assist in the training of new drivers on proper towing techniques and safety protocols., • Handle manual transmission vehicles with proficiency.Qualifications, • Valid driver's license with a clean driving record; experience driving tow trucks is preferred., • Strong mechanical knowledge and experience in automotive repair is highly desirable., • Ability to work flexible hours, including nights and weekends if required., • Excellent customer service skills, demonstrating professionalism in all interactions., • Experience with automotive diagnostics is beneficial., • Must be able to lift heavy objects and perform physical tasks associated with towing operations.Join our team as a Tow Truck Driver and contribute to providing reliable roadside assistance while ensuring customer satisfaction through your skills and dedication. Job Types: Full-time, Part-time Benefits: • Flexible schedule, • On-the-job training, • Opportunities for advancement, • Paid trainingSchedule:, • 10 hour shift, • 12 hour shift, • 4 hour shift, • 8 hour shift, • Day shift, • Evening shift, • Holidays, • Monday to Friday, • Morning shift, • Nights as needed, • Night shift, • On call, • Overnight shift, • Overtime, • Rotating weekends, • Weekends as needed, • Weekends onlySupplemental Pay:, • Monthly bonus, • Overtime payShift availability:, • Day Shift (Preferred), • Night Shift (Preferred), • Overnight Shift (Preferred)Ability to Commute:, • North Plainfield, NJ (Required)Ability to Relocate:, • North Plainfield, NJ: Relocate before starting work (Required)Work Location: In person

Job DescriptionDescriptionClinical Athletic Trainer Location: Union, NJ Entity: Alliance Orthopedics Reports To: Clinical Director Escape the Sidelines – Elevate Your Clinical Career Are you a licensed Athletic Trainer looking for a professional, high-energy clinic environment? Alliance Orthopedics, the region's most dynamic multidisciplinary practice—is seeking a motivated Clinical ATC to join our elite sports medicine team. At Alliance, you aren’t just on the sidelines; you are an integral part of a conservative care team working alongside Physical Therapists, Chiropractors, MDs, and Orthopedic Surgeons. We provide the resources and on-the-job training to help you utilize your full scope of practice in a premier clinical setting. Alliance Orthopedics Alliance Orthopedics is a multidisciplinary healthcare organization dedicated to helping patients get back to the activities they love. Our integrated team of medical providers, orthopedic specialists, physical therapists, occupational therapists, chiropractors, athletic trainers, and rehabilitation professionals work together to create a seamless patient experience and deliver exceptional outcomes. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about performance, injury prevention and helping people return to the activities they love, Alliance Orthopedics offers an opportunity to practice alongside a world class multidisciplinary team while making a meaningful impact every day. Why Join the Alliance Team? • Work-Life Balance: Stable, clinic-based schedule (Full-time, One Location, 4/10’s schedule)., • Clinical Growth: New Hire Mentorship Program, • Financial Security: 401(k) with company match + Retirement savings account., • Premium Benefits: Comprehensive Health, Dental, and Vision Insurance + Life & Disability coverage., • Perks: Tuition Reimbursement (terms apply) + Mental Healthcare benefits + Annual CEU reimbursement, • Culture: A "high-octane," fun, and motivating atmosphere where we help patients get BETTER EVERYDAY. Summary of Responsibilities What You’ll Do (Clinical Responsibilities) • Direct Patient Care: Provide engaging one-on-one evaluations and build genuine rapport with patients to understand their functional goals., • Advanced Testing: Oversee Physical Performance Testing (PPT), including Functional Movement Screening (FMS) and computer-recorded strength testing., • Exercise Prescription: Develop and tailor patient-specific rehab programs and monitor progressions/regressions., • High-Tech Modalities: Utilize state-of-the-art equipment including Alter-G Treadmills, DRX-9000 Traction, Normatec, Game Ready, and Litecure Laser., • Interdisciplinary Liaison: Communicate directly with surgeons and medical doctors to streamline patient care plans., • Community Engagement: Participate in exciting marketing events, team outings, and company initiatives. Requirements:, • Valid New Jersey Athletic Trainer License, • Degree from an accredited Athletic Training Education Program., • 2+ years in a healthcare setting with a strong understanding of sports-related injuries and manual techniques., • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life, • Understanding of therapeutic treatments, manual massage, exercise prescription, and physical therapy techniques and equipment, • An articulate team player who brings energy and a willingness to challenge themselves and their patients. Alliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms River Job Type:, • Full-time, on-site, • One location, • Exempt Background Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law.

Job DescriptionBenefits: • Employee discounts About the Role: Join Scotch Plains Fanwood Dental Care as an Orthodontic Assistant and be an integral part of our dedicated team! In this exciting role, you'll assist in providing top-notch orthodontic care to our patients, ensuring they leave with beautiful smiles. patients receiving treatments like braces or aligners. Their role is a mix of clinical precision and patient communication to ensure treatment plans progress smoothly. Florida Dental Association +3 patients receiving treatments like braces or aligners. Their role is a mix of clinical precision and patient communication to ensure treatment plans progress smoothly. Florida Dental Association +3 Key Responsibilities • Clinical Assisting: Prepare patients for treatment and assist orthodontists during bonding, wire adjustments, and bracket repairs., • Direct Patient Care: Perform routine adjustments, such as changing archwires, ligatures (elastic bands), and springs., • Diagnostic Support: Take intraoral X-rays, digital scans (like iTero), and physical molds or impressions for treatment planning., • Sterilization & Setup: Ensure all orthodontic instruments are properly sterilized and that treatment rooms are stocked and ready for each appointment., • Patient Education: Instruct patients on proper oral hygiene, how to care for their appliances, and what to do in case of emergencies like a broken wire. Essential Skills • Technical Proficiency: Deep knowledge of orthodontic anatomy, terminology, and tools, as well as the ability to operate imaging equipment., • Manual Dexterity: High level of hand-eye coordination for the precise placement of small orthodontic components in a patient's mouth., • Strong Communication: Ability to build rapport with patients (often children and teens) and explain complex procedures in simple terms., • Organization & Multitasking: Skill in managing multiple chairside tasks and keeping a fast-paced clinical schedule on track. Betterteam +4Common Qualifications • Education: A high school diploma or GED is the standard starting point, often followed by a certificate or associate degree in dental assisting with a focus on orthodontics., • Certification: Many employers prefer or require the Certified Orthodontic Assistant (COA) credential from the Dental Assisting National Board (DANB)., • Licensure: Requirements vary by state; some require specific permits for tasks like taking X-rays (Radiation Health and Safety) or performing expanded functions. Prism Career Institute +5Would you like to see a list of local training programs or job openings for orthodontic assistants in your area? 15 sites • Orthodontic Assistant (Ortho Common Qualifications • Education: A high school diploma or GED is the standard starting point, often followed by a certificate or associate degree in dental assisting with a focus on orthodontics., • Certification: Many employers prefer or require the Certified Orthodontic Assistant (COA) credential from the Dental Assisting National Board (DANB)., • Licensure: Requirements vary by state; some require specific permits for tasks like taking X-rays (Radiation Health and Safety) or performing expanded functions. Prism Career Institute +5Would you like to see a list of local training programs or job openings for orthodontic assistants in your area? 15 sites • Orthodontic Assistant (Ortho Florida Dental Association +6Essential Skills • Technical Proficiency: Deep knowledge of orthodontic anatomy, terminology, and tools, as well as the ability to operate imaging equipment., • Manual Dexterity: High level of hand-eye coordination for the precise placement of small orthodontic components in a patient's mouth., • Strong Communication: Ability to build rapport with patients (often children and teens) and explain complex procedures in simple terms., • Organization & Multitasking: Skill in managing multiple chairside tasks and keeping a fast-paced clinical schedule on track. Betterteam +4Common Qualifications • Education: A high school diploma or GED is the standard starting point, often followed by a certificate or associate degree in dental assisting with a focus on orthodontics., • Certification: Many employers prefer or require the Certified Orthodontic Assistant (COA) credential from the Dental Assisting National Board (DANB)., • Licensure: Requirements vary by state; some require specific permits for tasks like taking X-rays (Radiation Health and Safety) or performing expanded functions. Prism Career Institute +5Would you like to see a list of local training programs or job openings for orthodontic assistants in your area? 15 sites • Orthodontic Assistant (Ortho Responsibilities: • Assist orthodontist during patient examinations and treatment procedures., • Prepare and sterilize dental instruments and equipment., • Take and develop dental radiographs (X-rays)., • Educate patients on oral hygiene and post-treatment care., • Manage patient records and maintain appointment schedules., • Ensure a clean and organized work environment., • Communicate effectively with patients and their families., • Assist with inventory management and ordering supplies as needed.Requirpatients receiving treatments like braces or aligners. Their role is a mix of clinical precision and patient communication to ensure treatment plans progress smoothly., • Clinical Assisting: Prepare patients for treatment and assist orthodontists during bonding, wire adjustments, and bracket repairs., • Direct Patient Care: Perform routine adjustments, such as changing archwires, ligatures (elastic bands), and springs., • Diagnostic Support: Take intraoral X-rays, digital scans (like iTero), and physical molds or impressions for treatment planning., • Sterilization & Setup: Ensure all orthodontic instruments are properly sterilized and that treatment rooms are stocked and ready for each appointment., • Patient Education: Instruct patients on proper oral hygiene, how to care for their appliances, and what to do in case of emergencies like a broken wire. Florida Dental Association +6Essential Skills • Technical Proficiency: Deep knowledge of orthodontic anatomy, terminology, and tools, as well as the ability to operate imaging equipment., • Manual Dexterity: High level of hand-eye coordination for the precise placement of small orthodontic components in a patient's mouth., • Strong Communication: Ability to build rapport with patients (often children and teens) and explain complex procedures in simple terms., • Organization & Multitasking: Skill in managing multiple chairside tasks and keeping a fast-paced clinical schedule on track. Betterteam +4Common Qualifications • Education: A high school diploma or GED is the standard starting point, often followed by a certificate or associate degree in dental assisting with a focus on orthodontics., • Certification: Many employers prefer or require the Certified Orthodontic Assistant (COA) credential from the Dental Assisting National Board (DANB)., • Licensure: Requirements vary by state; some require specific permits for tasks like taking X-rays (Radiation Health and Safety) or performing expanded functions. Prism Career Institute +5Would you like to see a list of local training programs or job openings for orthodontic assistants in your area? 15 sites • Orthodontic Assistant (Ortho ements: • High school diploma or equivalent; dental assistant certification preferred., • Previous experience in orthodontics or dental assisting is a plus., • Knowledge of dental terminology and procedures., • Strong communication and interpersonal skills., • Ability to work well in a team-oriented environment., • Detail-oriented with excellent organizational skills., • Current CPR and First Aid certification., • Positive attitude and a passion for patient care.About Us: Scotch Plains Fanwood Dental Care has been serving the community for over 20 years, providing exceptional dental and orthodontic services. Our patients love us for our friendly staff and personalized care, while our employees appreciate our supportive environment and commitment to professional growth.

Job Description A Trailer Mechanic plays a vital role in ensuring the safety, reliability, and efficiency of trailers through thorough maintenance, inspections, and repairs. Working primarily within a small team, this role involves handling routine upkeep as well as urgent repairs, utilizing both manual tools and diagnostic software to maintain trailer functionality. Responsibilities • Perform routine trailer maintenance to ensure operational safety, • Conduct thorough safety inspections to identify potential issues, • Replace worn or damaged parts promptly to minimize downtime, • Implement preventive maintenance practices to avoid costly repairs, • Handle emergency repair tasks efficiently within the team, • Operate specialized machinery and diagnostic tools effectively Preferred Qualifications • 1+ years of experience in vehicle or trailer maintenance

Job Description As a CDL-A Driver in the C.R. England Condo fleet, you can count on consistent miles with regular routes, highly competitive pay, health and retirement benefits, and the industry’s best equipment. This Target offering is an excellent position for those looking for great pay and home time. Valid CDL-A plus 3+ months of Class A CDL experience required This lane is not suitable for students, recent graduates, or trainees. Lane details: Deliver freight to various locations throughout MD, NJ, PA, VA, WV, and DC area All loads are hook and drop with no-touch freight Drivers average 2400 miles a week and make consistent paychecks Schedule: Home weekly for a 34-hour reset Drivers who live within commuting distance of the DC will be home every other night The account operates 24/7 including holidays Mileage pay Bonus incentives Driver requirements: Valid Class A CDL 21 Years of age or older 3 months of Class A CDL experience Benefits: Medical, Dental, Vision, HSA, FSA, Life and AD&D Insurance PTO 401(k) Additional voluntary benefits For additional details, including eligibility, please see the Company’s Benefit Summary and Driver Employee Policy Manual. Weekly and yearly pay estimates are based on 1+ years of experience. For Pay Disclaimer visit: https://www.crengland.com/pay-disclaimer/. For Privacy Policy visit: https://www.crengland.com/privacy-policy/ \nCompany Description Whether you need a CDL, a truck driver job, or both; we have you covered with best-in-class training and great pay is just the start to take your career to the next level. We have open lanes in our Dedicated, Regional, National, and Intermodal divisions allowing you to choose your lane. All of our jobs include highly competitive pay, health and retirement benefits, and the industry’s best equipment. We are seeking truck drivers that have a safe and clean record and can handle 12 Gears, 18 Wheels, 40 Tons, 80 Feet, and 400 Horsepower!

Job DescriptionDescription: JESCO, a leading John Deere, Wirtgen Group, Ditch Witch and Topcon dealer in New York, New Jersey, Maryland, Delaware, Virginia, and New England region. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company of over 350 employees. Why JESCO: Two things that haven’t changed are our commitment to the customers and communities we serve. Let us show you what makes us the “Down to Earth Equipment People”. We offer comprehensive benefits packages, career development paths, state of the art tools and equipment as well as a great working environment. Start your career as a valued member of the JESCO team. Responsibilities • All Service assignments are to be performed in a safe, efficient and capable manner, using the least number of labor hours necessary, while maintaining the highest quality of standards possible, • Individuals must comply with all safety policies, and have the ability to lift and move up to 70 lbs., • Review service orders and inspect equipment accordingly for additional repairs or malfunctions by test driving or troubleshooting vehicle operation., • Notify management if shop equipment is not in serviceable condition or constitutes a safety hazard, • Service orders should be completed accurately and concisely, use of computer when applicable, • Warranty reports are to be handled in the same manner, and you must retain, tag and store removed parts properly for return to manufacturer, • Apply technical knowledge to diagnose cause of equipment malfunctions., • Obtain final approval prior to performing additional repairs., • Respond to repair inquiries in a prompt manner., • Perform repairs and maintenance service work requested in accordance with approved quality and efficiency standards. Discard residual or hazardous waste, using the proper disposal methods, • Invest in tools necessary to perform at expected levels and quality, • Always conduct yourself in a professional manner at all times when representing the company, • Apply knowledge and ability to safely utilize all tools and equipment to include: “Creeper” Pressure washers Torque wrenches Hydraulic pressure Computer pressure gauges Welding equipment Pneumatic and hand tools Hydraulic jacks Diagnostic equipment • Maintain, understand, and be committed to a shared responsibility for the upgrade of technical competence by attending all classes, shop meetings and reading all service bulletins as requested, • Test drive to assure proper operation and complete equipment inspections in accordance with company and governed standards, • Respect and maintain company investment in tools and work area. Keep company assets in a clean and orderly manner and use with proper care to meet safety requirements determined by dealership and government agenciesRequirements:, • Deere Level 1, Deere Level 2, Deere Capstone Certification, • Associates Degree and/or technical certification from accredited trade school, • Must have valid drivers license – must meet underwriting requirements, • Written Communication, • Technical Communication, • Customer Relations, • Customer Service, • Math Aptitude, • Time Management, • Manual Dexterity Skills, • Ability to stand for long periods of time We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #ZR

Job Description Thirty Madison is now part of Remedy! You can read more about the acquisition here. We are excited to join forces and continue to revolutionize healthcare accessibility! As a Care Coordinator, you will work closely with our providers and patients through many stages of their Remedy journey. The role is both patient and provider-facing, from helping patients receive medical records, to assisting providers in coordinating treatment plans. You'll partner with and support the Customer Experience team, our medical network, and patients across all of our brands. You are comfortable speaking with others across various channels (primarily email/message) compassionately and professionally. Comp | Perks | Benefits • The base pay range for this position is $20.00 per hour**, • Robust and affordable Medical, Dental, and Vision plan options, • Vacation time off policy - up to 10 vacation days accrued your first year. Vacation time begins accruing immediately **Base pay offered may vary depending on job-related knowledge, skills, and experience. What you get to do every day • Work collaboratively and alongside a multi-disciplinary team of providers, nurses, care coordinators, and customer service agents to ensure a high-quality patient experience by understanding the scope of practice across all patient-facing roles and acting as a patient liaison, • Ensure processes and procedures are being followed - which allows efficient, effective, and timely delivery of care, • Identify potential quality issues in care and escalate as appropriate, • Identify and appropriately escalate urgent patient concerns in a timely and effective manner, • Manage patient/provider messaging, properly route patient information/requests to relevant team member(s), and manage order fulfillment queues, • Provide administrative and communication support for our provider network, • Coordinate the treatment and community resources available to patients, • Other duties as assigned What you bring to the role • 1+ year of experience in a medical practice where an understanding of medical terminology was obtained, • Willingness to work regular weekends and ability to work at least three holidays a year, • Demonstrate excellent verbal and written communication skills, serving as the primary point of contact between our brands and the diverse patient base, • Pay close attention to detail, recognizing the importance of every aspect of patient care, • Possess a service-oriented mindset, empathetically understanding patients' perspectives and communicating clearly, kindly, and directly with both patients and internal team members, • Be self-motivated and willing to go the extra mile to help people navigate a complex industry, • Skilled at using online tools and technology to deliver care and communicate effectively with patients, • Maintain regular and reliable attendance, contributing consistently to our inclusive work environment, • Adhere to the assigned work schedule, promoting a sense of reliability and dependability within the team IT Requirements • Reliable at-home internet with a download speed of at least 25 Mbps and an upload speed of at least 5 Mbps, • A quiet place in your home to receive inbound and place outbound calls. Physical Requirements • Manual dexterity, arm and upper body range of motion sufficient for use of a keyboard, mouse, and telephone 7-8 hours per day, • Speech and hearing sufficient for in-person communication 7-8 hours per day, • Vision sufficient for use of a computer monitor, • Ability to sit or stand at a desk for 7-8 hours per day All Company policies and procedures are subject to change without notice based on business needs. This includes, but is not limited to, the locations where we hire remote, hybrid, or onsite employees. U.S. Applicants Only Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At Remedy we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions. Contact us at recruiting@thirtymadison.com to request accommodation. This employer participates in E-Verify and will provide the federal government with your I-9 Form information to confirm that you are authorized to work in the U.S. *Please be aware that there are fraudulent entities who are falsely claiming to be or represent Remedy in order to solicit sensitive personal information or payment. Remedy is not in any way associated with these entities or practices. The safety and integrity of those seeking employment with us is of the utmost importance and we actively work with our legal and security teams to prevent future incidents. Remedy will never ask for sensitive information or payment when engaging with job seekers. The entities use many methods to perpetuate these scams, including but not limited to: participating in a text-only interview, using Remedy's trademarks on their correspondence, or providing you with a seemingly legitimate offer letter. If you suspect you are a victim of this scamming, we encourage you to cease further contact and report the crime to The Federal Trade Commission.

OVERVIEW Starting wage is based on a number of factors including, but not limited to, the position being offered, location, education, training, and/or experience. Construction Resources offers additional competitive and non-financial benefits. The Delivery Truck Driver is responsible for the safe operation of the company’s truck with a typical weight capacity of 30-55,000 pounds (GVW). This role is responsible for all functions related to the vehicle, including the pre-trip report (DVIR), ensuring the truck is loaded properly, the material is secured to the truck, delivery of materials to the customer location, and processing of all customer delivery paperwork. JOB DESCRIPTION Responsibilities: • Safely operate a heavy-load truck., • Ensure all material is properly secured at the beginning of the shift and continuously monitor after each delivery., • Ensure that all customer supporting paperwork is completed and returned at the end of each shift., • Collect, document, and properly secure money received to ensure alignment with customer paperwork., • Report any issues or incidents related to material damage or customer matters to dispatch., • Perform the daily truck inspection, pre- and post-trip (DVIR)., • Seek advice and guidance on non-routine or problem areas from supervisor., • Perform and document inspections to ensure truck and equipment are kept in good condition. Basic Qualifications: • High School Diploma or GED required., • Minimum of 2 years of truck driving experience with a proven track record of safe driving., • Possession of a CDL (type A or B) Commercial driver’s license., • Proficient in driving manual transmission trucks., • Capability to operate a gate lift., • Proficiency in operating an electric pallet jack., • Experience in handling commercial and residential deliveries., • Ability to service all region’s distribution centers., • Excellent communication and interpersonal skills., • Travel is required for this position., • Successful completion of a pre-employment drug test and background check is mandatory. Preferred Qualifications: • Knowledge of DOT rules and regulations, • Minimum of 5 years of forklift experience, • Minimum of 5 years of truck driving experience with a proven track record of safe driving. #CRTrades New Jersey Pay Transparency$25—$28 USD BENEFITS Medical Dental Vision Employer Paid Basic Employee Life and AD&D Insurance Employer Paid Long Term Disability Flexible Spending Accounts Voluntary Short-Term Disability Voluntary Life and AD&D Insurance Voluntary Accident Insurance Voluntary Critical Illness Insurance EEO At Construction Resources, our people are the driving force behind everything we do. Construction Resources is an equal opportunity employer that aspires to be the best in the business by building an associate experience that celebrates growth, development, and purpose. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to speak or hear. The employee is frequently required to sit for extended periods of time, stand, walk, climb stairs, use hands to finger, handle or feel, and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position that requires overtime as business needs dictate. OTHER DUTIES Please note: this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. PRIVACY NOTICE We value your privacy and want to ensure transparency regarding the collection and processing of your personal data. As part of our recruitment process, we require your explicit consent to collect, store, and process your personal information, including but not limited to your resume, contact details, professional experience, and other relevant data. This data will be used solely for recruitment and hiring purposes in accordance with our privacy policy and applicable data protection regulations. Your information will be stored securely and will not be shared with third parties without your consent. By submitting your application, you agree to the collection and processing of your personal data for the purposes stated above. You may withdraw your consent at any time by contacting us at recruitment@crhomeusa.com.

Job Description Overview Are you looking for a career you can feel good about? We hire only those that strive to do their best. By joining our family, you'll receive the honor and recognition that comes with working for the industry's global leader in evidenced based rehabilitation. Who We Are: GEO provides complementary, turnkey solutions for numerous government partners worldwide across a spectrum of diversified correctional and community reentry services. From the development of state-of-the-art facilities and the provision of management services and evidence-based rehabilitation to the post-release reintegration and supervision of individuals in the community, GEO offers fully diversified, cost-effective services that deliver enhanced quality and improved outcomes. Why Work for GEO: • We believe that work is more than a place you go to every day. It is about being inspired and motivated to achieve extraordinary things., • Employee benefits play an important role in making The GEO Group a great place to work. At GEO, we believe in the three pillars of employee wellbeing: physical, emotional, and financial. With comprehensive benefits and competitive wages, we trust that you will find all the resources you need here to be successful. Responsibilities Summary Under close supervision, the Case Manager provides support and structure to residents in developing program plans by managing a caseload of client cases and administering the policies and procedures of the program as directed by the contracting agency and the Facility Director. Learns, uses and models the principles of the “What Works” system through evidence-based practices in all interactions with clients and other staff members. Trains and assists less experienced case managers. Primary Duties and Responsibilities • May perform the duties of a Monitor including resident intakes, check-ins, breath analysis and drug screens, to provide backup when necessary., • Prepares written personalized programs for each resident to establish measurable criteria of expected behavior and accomplishments and a time frame for achieving specified goals., • Reviews plan with residents on a weekly basis and documents progress or revisions so that they are gaining the life skills necessary to make a successful re-entry into the community., • Assists residents to establish personal budget, locate suitable housing, enroll in educational and vocational programs and participate in family and community activities, as appropriate, to ensure that they are working towards financial independence., • Monitors facility sanitation and safety. Assigns daily housekeeping chores to residents to comply with facility standards., • May orient residents upon arrival at facility to provide smooth assimilation into program including having them complete paperwork, take facility tours, or introduce to other residents., • Make entries into confidential resident files to provide the structure for case analysis and program planning and to provide documentation of program participation. Ensure files are secure to protect resident confidentiality., • Assists Job Developers to verify residents' jobs to ensure residents' employment is suitable under established program plan. Counsels unemployed residents by providing guidance in obtaining employment in cooperation with the Job Developer., • Verifies residents' pass plan through pass sponsorship according to contract so that the resident is accountable for his/her whereabouts in the community., • Prepares terminal reports within established time parameters upon resident release to summarize program performance and to satisfy contract requirements., • Participates in staff meetings by sharing observations and recommendations regarding the facility, residents and staff relations to identify and solve problems and function as a unified team., • Maintains confidentiality obtained through job duties regarding employees, vendors, residents, and outside agencies so that sensitive information is only given on a "need to know" basis., • Monitors client compliance with alcohol and drug counseling when required., • Reports all program violations to the appropriate agency or official via the established reporting parameters., • Conducts orientation meetings with new clients to explain program rules and regulations. Verbally explains the client contract in detail to ensure that the client understands his/her responsibilities. Installs electronic monitoring equipment on new clients when necessary., • Sets client schedules and specifies all approved activities based on sentencing information. Approves temporary schedule changes for approved activities., • Communicate effectively with all levels of staff in a manner that promotes a team spirit and a sense of cooperation., • Complies with work rules and policies as explained in the company Employee Handbook, and the Facility Policies and Procedures Manual; and responds positively to directives from managers and supervisors in a cooperative spirit to ensure conformance to standards., • Adheres to attendance policy; work overtime as required, to ensure adequate coverage of the program and to ensure the safety and security of the residents., • Complies with safety rules; take appropriate corrective action to ensure work is performed in a safe manner and without injury to self or others., • Communicates effectively with all levels of staff in a manner that promotes a team spirit and a sense of cooperation., • Performs other duties as assigned. Qualifications Minimum Requirements • A Bachelor’s degree in Human Services discipline or equivalent experience preferred. (A Bachelor’s degree a must when required by contractual obligations or may be required for Re-Entry offices)., • Substance abuse or domestic violence certification or the ability to become certified preferred., • One (1) year experience as a Monitor or two (2) years of work experience in a related field., • Familiar with community corrections reentry systems and current community corrections reentry practices., • Familiar with community work force needs, public and private agencies and employment services., • Ability to write clear concise reports in English using correct grammar., • Ability to add, subtract, multiply, divide, and calculate percentages., • Must be able to react quickly and appropriately in an emergency situation., • Bilingual in English/Spanish preferred, but not mandatory., • Ability to work with computers and the necessary software typically used by the department. GEO Reentry Services LLC.

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Training & development Overview: As a Home Health Aide in Union County NJ at Vitality Health Care, you will play a crucial role in providing compassionate care and support to individuals in the comfort of their own homes. You will be responsible for assisting clients with their daily living activities, promoting independence, and ensuring their well-being. This position requires empathy, patience, and excellent interpersonal skills to establish trust and rapport with clients and their families. Responsibilities: • Provide personal care assistance to clients, including bathing, grooming, dressing, and toileting., • Assist clients with mobility and transfers, using appropriate techniques and equipment., • Support clients with their nutritional needs, including meal preparation and feeding assistance if required., • Administer medications under the direction and supervision of a registered nurse or licensed healthcare professional., • Perform light housekeeping tasks, such as laundry, washing dishes, and tidying living areas., • Monitor and report changes in clients' health status or behavior to the supervising nurse or healthcare provider., • Foster a safe and supportive environment for clients, ensuring their comfort and security at all times., • Provide companionship and emotional support to clients, engaging in meaningful interactions and activities., • Document all care provided accurately and timely in accordance with agency policies and procedures., • Collaborate effectively with the interdisciplinary healthcare team, including nurses, therapists, and social workers, to ensure coordinated care delivery., • Participate in ongoing training and educational opportunities to enhance skills and knowledge in home health care practices., • Adhere to ethical and professional standards, maintaining confidentiality and respecting clients' rights and dignity., • Follow infection control protocols and maintain a clean and hygienic environment to prevent the spread of illness and infection. Qualifications: • High school diploma or equivalent required., • Completion of a state-approved Home Health Aide training program preferred., • Certification as a Home Health Aide (HHA), • Previous experience in home care, long-term care, or related healthcare settings preferred., • CPR and first aid certification preferred., • Strong communication and interpersonal skills, with the ability to interact effectively with clients, families, and healthcare professionals., • Compassionate and empathetic attitude towards the needs of clients and their families., • Ability to follow care plans and instructions accurately and responsibly., • Reliable transportation and valid driver's license, if required to travel to clients' homes., • Ability to lift and move clients safely, as needed, using proper body mechanics and assistive devices., • Flexibility to work varying shifts, including evenings, weekends, and holidays, based on client needs and scheduling requirements. Physical Demands: • Must be able to lift and carry up to 50 pounds., • Ability to stand, walk, bend, stoop, and kneel for extended periods., • Manual dexterity and physical stamina to perform tasks such as bathing, grooming, and light housekeeping. Working Conditions: • Work primarily takes place in clients' homes, which may vary in terms of cleanliness, accessibility, and environmental conditions., • Potential exposure to infectious diseases and hazardous materials, requiring adherence to safety protocols and precautions. Note: This job description is intended to convey information essential to understanding the scope of the position and is not exhaustive. Duties, responsibilities, and qualifications may be adjusted or added as needed to meet the evolving needs of our clients and organization.

Overview: Interstate Waste Services is Now Hiring CDL B Front Load Truck Drivers! Safety is our first Priority! $31.27/ hour Dispatch Location: Plainfield, NJ Schedule: Monday-Saturday Front Load Garbage Truck experience required To be considered: When applying, submit a resume showing work history Highlights: • Work Week:Monday-Saturday, • Schedule: 3am-1:30pm, • Hourly pay - $31.27, • Min 1 year CDL experience required, • Full Comprehensive benefits package including Medical, Dental Vision, 401k and much more... Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, and recently expanded our operations of transfer stations into Pennsylvania and Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. We have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Job Highlights: • Drivers are Responsible for Safely Operating Front, Side, or Rear-Loading Trucks, for the Pick-Up Service of Bags or Containers Filled with Waste or Recyclable Material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift, • Drivers Transport the Material to a Disposal, Transfer or Recycling Facility, & May Make One or More Trips Throughout the Shift, • We Deploy Both Manual & Automatic Trucks, • The Driver Position May Be Required to Repeatedly Lift up to 50 Pounds, & Move & Maneuver up to 100 Pounds, As Well As Mount & Dismount the Truck Multiple Times Every Route Requirements and Qualifications:: Requirements: • 21 Years of Age & Legally Eligible to Work in the United States, • Valid Class A or B CDL, • Airbrake Endorsement, • 1-year CDL driving experience in the last 7 years., • Great Safety Record and Clean MVR, • Experience as a Driver or Helper for a Refuge Company is Highly Preferred, • Working Knowledge of DOT, OSHA & Applicable Traffic Regulations, • Ability to Speak & Read English to Converse with the General Public, understand Highway Traffic & Signals, Respond to Official Questions & Make Legible Entries on Reports & Records, • Read & Understand a Map, • Meet Physical & Safety Requirements of the Position., • Willing & Able to Work Required Worked Hours as Allowed Under DOT Regulation & May Include Weekend, Night &/Or Holiday Work Additional Job Requirements: • Routes may require Drivers to navigate through congested communities and confined or tight areas in city locations., • Highly skilled backing maneuvers are essential to successfully perform this job., • Our drivers routinely climb in and out of the truck cab to service customer accounts., • Driver pre and post inspections required. Drivers are responsible for ensuring their truck is in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws, prior to and while operating the vehicle., • Other duties as assigned. Additional Information: IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $31.27/Hr. Salary Range Maximum: USD $31.27/Hr.

Overview: Interstate Waste Services is Now Hiring CDL B Side Load Truck Drivers! Safety is our first Priority! $31.27/ hour Dispatch Location: Plainfield, NJ Schedule: Monday-Saturday Side Load Garbage Truck experience required To be considered: When applying, submit a resume showing work history Highlights: • Work Week:Monday-Saturday, • Schedule: 3am-1:30pm, • Hourly pay - $31.27, • Min 1 year CDL experience required, • Full Comprehensive benefits package including Medical, Dental Vision, 401k and much more... Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, and recently expanded our operations of transfer stations into Pennsylvania and Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. We have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Job Highlights: • Drivers are Responsible for Safely Operating Front, Side, or Rear-Loading Trucks, for the Pick-Up Service of Bags or Containers Filled with Waste or Recyclable Material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift, • Drivers Transport the Material to a Disposal, Transfer or Recycling Facility, & May Make One or More Trips Throughout the Shift, • We Deploy Both Manual & Automatic Trucks, • The Driver Position May Be Required to Repeatedly Lift up to 50 Pounds, & Move & Maneuver up to 100 Pounds, As Well As Mount & Dismount the Truck Multiple Times Every Route Requirements and Qualifications:: Requirements: • 21 Years of Age & Legally Eligible to Work in the United States, • Valid Class A or B CDL, • Airbrake Endorsement, • 1-year CDL driving experience in the last 7 years., • Great Safety Record and Clean MVR, • Experience as a Driver or Helper for a Refuge Company is Highly Preferred, • Working Knowledge of DOT, OSHA & Applicable Traffic Regulations, • Ability to Speak & Read English to Converse with the General Public, understand Highway Traffic & Signals, Respond to Official Questions & Make Legible Entries on Reports & Records, • Read & Understand a Map, • Meet Physical & Safety Requirements of the Position., • Willing & Able to Work Required Worked Hours as Allowed Under DOT Regulation & May Include Weekend, Night &/Or Holiday Work Additional Job Requirements: • Routes may require Drivers to navigate through congested communities and confined or tight areas in city locations., • Highly skilled backing maneuvers are essential to successfully perform this job., • Our drivers routinely climb in and out of the truck cab to service customer accounts., • Driver pre and post inspections required. Drivers are responsible for ensuring their truck is in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws, prior to and while operating the vehicle., • Other duties as assigned. Additional Information: IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $31.27/Hr. Salary Range Maximum: USD $31.27/Hr.

Fusion Medical Staffing is seeking an experienced Cath Lab Registered Nurse for an exciting Travel Nursing job in New York, NY. Shift: Inquire Start Date: 08/25/2026 Duration: 13 weeks Pay: $2376 / Week Company: Fusion Medical Staffing Location: Facility in New York, New York Job Details Fusion Medical Staffing is seeking a skilled Cardiac Cath Lab RN for a 13-week travel assignment in New York, New York. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year’s recent experience as a Cath Lab RN, • Valid RN license in compliance with state regulations, • Current BLS (AHA/ ARC) Certification, • Current ACLS CertificationPreferred Qualifications:, • PALS or ENPC Certifications, • RCIS certification, • Other certifications and licenses may be required for this positionSummary: The Travel Cath Lab RN provides specialized care for patients undergoing cardiac catheterization and interventional treatments. The RN prepares patients for procedures, assists during interventions, and monitors immediate post-procedure recovery. Working closely with cardiologists and cath lab teams, this role requires advanced cardiac care skills, cardiac catheterization skills, strong communication, and the ability to adapt quickly while maintaining strict safety and regulatory standards. Essential Work Functions: • Conduct assessment of patients prior to procedures, including reviewing medical history and performing physical exams, • Assist in positioning patients correctly for the procedure and ensure EKG electrodes and cardiac leads are properly placed, • Assist physicians during procedures, including the placement of catheters, wires, balloons, stents, structural heart devices, and other cardiac interventions, • Operate and monitor hemodynamic equipment, recognizing and responding to changes in cardiac rhythms and hemodynamic waveforms, • Assist in arterial and/or venous sheath removal using closure devices, manual pressure, or mechanical compression, and transport patients to the appropriate recovery area, • Monitor vital signs, ECG, and hemodynamic parameters during cardiac catheterization and interventional procedure, • Support post-procedure care, including monitoring patient recovery and ensuring a smooth transition to the next phase of care, • Maintain and troubleshoot cath lab equipment, ensuring everything is functioning properly and fully stocked for procedures, • Communicate effectively with team members, patients, families, and physicians to provide seamless care, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standards, • Perform other duties as assigned within the scope of practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUsWhy Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Cath Lab RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing: Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and benefits that travelers deserve. At Fusion, you can seriously choose your own adventure! Fusion's purpose is to ensure that everyone we touch has a better life. We strive to be humble, driven and positive in all our actions! Specialty Fields: • Cardiopulmonary, • Cath Lab, • Home Health, • Laboratory, • Long Term care, • Nursing, • Radiology, • Therapy

Fusion Medical Staffing is seeking an experienced Cath Lab Registered Nurse for an exciting Travel Nursing job in New York, NY. Shift: Inquire Start Date: 08/25/2026 Duration: 13 weeks Pay: $2376 / Week Company: Fusion Medical Staffing Location: Facility in New York, New York Job Details Fusion Medical Staffing is seeking a skilled Cardiac Cath Lab RN for a 13-week travel assignment in New York, New York. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year’s recent experience as a Cath Lab RN, • Valid RN license in compliance with state regulations, • Current BLS (AHA/ ARC) Certification, • Current ACLS CertificationPreferred Qualifications:, • PALS or ENPC Certifications, • RCIS certification, • Other certifications and licenses may be required for this positionSummary: The Travel Cath Lab RN provides specialized care for patients undergoing cardiac catheterization and interventional treatments. The RN prepares patients for procedures, assists during interventions, and monitors immediate post-procedure recovery. Working closely with cardiologists and cath lab teams, this role requires advanced cardiac care skills, cardiac catheterization skills, strong communication, and the ability to adapt quickly while maintaining strict safety and regulatory standards. Essential Work Functions: • Conduct assessment of patients prior to procedures, including reviewing medical history and performing physical exams, • Assist in positioning patients correctly for the procedure and ensure EKG electrodes and cardiac leads are properly placed, • Assist physicians during procedures, including the placement of catheters, wires, balloons, stents, structural heart devices, and other cardiac interventions, • Operate and monitor hemodynamic equipment, recognizing and responding to changes in cardiac rhythms and hemodynamic waveforms, • Assist in arterial and/or venous sheath removal using closure devices, manual pressure, or mechanical compression, and transport patients to the appropriate recovery area, • Monitor vital signs, ECG, and hemodynamic parameters during cardiac catheterization and interventional procedure, • Support post-procedure care, including monitoring patient recovery and ensuring a smooth transition to the next phase of care, • Maintain and troubleshoot cath lab equipment, ensuring everything is functioning properly and fully stocked for procedures, • Communicate effectively with team members, patients, families, and physicians to provide seamless care, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standards, • Perform other duties as assigned within the scope of practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUsWhy Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Cath Lab RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing: Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and benefits that travelers deserve. At Fusion, you can seriously choose your own adventure! Fusion's purpose is to ensure that everyone we touch has a better life. We strive to be humble, driven and positive in all our actions! Specialty Fields: • Cardiopulmonary, • Cath Lab, • Home Health, • Laboratory, • Long Term care, • Nursing, • Radiology, • Therapy

Job Description Shift: 7:00 a.m. - 4:00 p.m. (Mon-Fri) Overview The Picker and Packer is responsible for accurately selecting, preparing, packing, wrapping, and labeling products for shipment within a fast-paced logistics and warehouse environment. This position helps ensure customer orders are completed accurately, safely, and on time while maintaining established productivity and quality standards. Key Responsibilities • Pick products from designated warehouse locations according to customer orders or pick lists., • Verify product numbers, quantities, and order accuracy before packing., • Pack products securely using appropriate packaging materials, and label, seal, wrap, and prepare packages for shipment., • Scan products and update inventory using handheld scanners or warehouse management systems., • Sort and stage completed orders in designated shipping areas., • Inspect products for damage, defects, or incorrect items and report discrepancies., • Operate a Manual Pallet Jack to assist with loading, unloading, and transporting picked items, • Assist with receiving, stocking, inventory counts, and other warehouse duties as needed. Qualifications • Previous experience in Shipping & Receiving departments within a warehouse, logistics, or distribution environment, • Proven experience picking and packing, • Proven experience operating a Manual Pallet Jack, • Experience using RF scanners or warehouse management systems is a plus., • Ability to follow written and verbal instructions and strong attention to detail, • Basic math and counting skills., • Ability to work independently and as part of a team., • Dependable attendance and punctuality. Physical Requirements • Ability to stand and walk for extended periods during the shift., • Ability to frequently bend, reach, push, pull, and lift., • Ability to lift and carry up to 40 pounds, with or without reasonable accommodation., • Ability to perform repetitive picking, packing, and material-handling tasks., • Ability to work in a warehouse environment where temperatures and noise levels may vary.

Job Description Start Date: July 1, 2026 There’s nothing like seeing your hard work roll down the interstate. At Let’s Clean It Up Truck Wash, our wash team takes pride in keeping trucks and equipment looking their best. We’re looking for motivated, dependable individuals to join our New Jersey team and demonstrate their skills in a fast-paced truck wash environment. Education Requirements • High School Diploma or GED required Job Responsibilities Serious applicants only. Responsibilities include, but are not limited to: • Washing and detailing heavy equipment, trucks, and trailers (occasional cars), • Operating high-pressure wash equipment, hand scrubbing tools, polishing tools, and chemical wash systems, • Accurately logging wash activities using a computer or manual worksheets, • Maintaining a clean, safe, and organized work area, • Providing professional, high-quality customer service Qualifications • Strong desire to learn and willingness to be trained, • Valid driver’s license with a good driving record, • Ability to complete tasks thoroughly and efficiently, • Ability to read, speak, and understand English, including basic math, • Strong attention to safety and urgency, • Ability to work independently and as part of a team, • Comfortable working in noisy and outdoor environments, • Willing to learn and perform additional skills as needed, • Prior truck or vehicle washing experience is a plus (car detailing experience is helpful but not equivalent), • Class A CDL is a plus, but not required Physical Requirements • Ability to stand, walk, bend, reach, stoop, push, pull, lift, and carry up to 75 pounds, • Ability to work 8–10-hour shifts in various environmental conditions Work Schedule • Monday through Sunday, • Day shifts required, • Overnight shifts as requested by the company, • Weekend availability is required, • 8–10-hour shifts Additional Requirements • Reliable transportation to and from work, • Relocation assistance may be available (ask about locations) License/Certification • Valid Driver’s License (Required)Company DescriptionLet's Clean It Up Mobile Truck Wash, Detail, & Polish.Let's Clean It Up Mobile Truck Wash, Detail, & Polish.

Job Description Shift: 7:00 a.m. - 4:00 p.m. (Mon-Fri) The General Warehouse Associate plays a vital role in maintaining efficient warehouse operations within a Shipping and Receiving Team for a Logistics Company. This role combines floor level experience and responsibilities, with material handling equipment operation. Frequent Responsibilities: • Manually Pick Orders: By hand, with Pick Sheets & RF scanners, and the assistance of a Manual Pallet Jack, • Manually Pack Orders Shipping: Stack, Scan, Package, Band, Shrink wrap, and label outgoing product, • Stage: Shipping and Receiving Areas and assemble pallets, • Inspect/Perform Quality Checks: on outgoing and inbound pallets, • Load and Unload Materials: By Hand and with a Pallet Jack Occasional Responsibilities: • Operate: an Electric Pallet Jack, Sit-Down Forklift, and a Stand-up Reach, • Perform Inventory Functions: Stock Rotations, Cycle Counts, Inventory Audits Preferred Qualifications • Minimum of 2-years of experience in Shipping & Receiving Operations, • Minimum of 2-years of experience with Order Picking & Packing, • Proven experience Picking & Packing, Shrink Wrapping, and Labeling, • Proven experience using an RF Scanner, • Proven experience using a Manual Pallet Jack, • Relevant experience operating a Electric Pallet Jack, Sit-Down Forklift, or Stand-up Reach Truck is a PLUS What is Offered: • Stable & Welcoming Environment, • Consistent Hours, • Opportunities for Overtime, • Training on Material Handling Equipment (EPJ, Sit-Down Forklift, Stand-up Reach Truck), • Temp-Hire Opportunity

Job Description JOB OVERVIEW: Greet and serve the guests according to standards. ESSENTIAL JOB FUNCTIONS: 1. Take and serve guest orders promptly and according to service manual., 2. Do all necessary set-up sidework as assigned., 3. Answer any guest questions about the menu., 4. Operate the electronic cash register/P.O.S. system (where applicable)., 5. Check food after serving it to guest to ascertain that appearance, temperature and portions are correct., 6. Perform any other job related duties as assigned. REQUIRED SKILLS AND ABILITIES: Must have the ability to communicate in English. Self-starting personality with an even disposition. Maintain a professional appearance and manner at all times. Can communicate well with guests. Must be willing to “pitch-in” and help co-workers with their job duties and be a team player. Must be able to withstand prolonged periods of standing and/or walking. Ability to lift at least 30 lbs. PERFORMANCE STANDARDS Customer Satisfaction: Our customers are what we are about. One of the keys to a positive guest experience is positive interaction with Crescent staff. It is essential that you remain professional at all times, and that you treat all guests and associates with courtesy and respect, under all circumstances. Every Crescent associate is a guest relations ambassador, every working minute of every day. Work Habits: In order to maintain a positive guest and associate experience, your work habits should always meet and strive to exceed hotel standards for work procedures, dress, grooming, punctuality and attendance. You should be adaptable to change in your work area and in hotel procedures with a willingness to learn new skills and/or improve existing ones, have the ability to solve routine problems that occur on the job and ask for help whenever you are not sure how to do something. Safety & Security: The safety and security of our guests and associates is of utmost importance to Crescent Hotels & Resorts. Every Crescent associate should adhere to the hotel security policies and procedures, particularly regarding key controls, lifting heavy objects, using chemicals, and effectively reporting safety hazards and safety concerns. NOTE: This description excludes non-essential and marginal functions of the position that are incidental to the performance of the fundamental job duties. Furthermore, the specific examples in each section are not intended to be all-inclusive. Rather, they represent the typical elements and criteria considered necessary to perform the job successfully. Other job-related duties may be assigned by the associate’s supervisor. Furthermore, this description is subject to change, in the sole discretion of the Company, and in no way creates an employment contract, implied or otherwise; each associate remains, at all times, an “at will” associate.

Job Description Shift: 7am-3:45pm (Mon-Fri) The Material Handler rotates between numerous daily needs, including picking, packing, shipping, receiving, inventory, pallet jack operation, and operating forklifts. This role requires a generalist warehouse background, capable of contributing to a well-rounded team, whether the needs of production are floor or equipment related. Responsibilities • Receive incoming goods and verify their condition, • Store Materials in designated locations, • Manage inventory accuracy, organization, and perform cycle counts, • Picking Orders, daily, to prepare items for shipment, • Shrink Wrapping, Labeling, Packaging and Staging Outbound orders, • Load and unload materials from delivery vehicles, • Operate Pallet Jacks to assist with Loading, Unloading, and Order Picking, • Operate Sit-Down Forklifts and Stand-Up Reach Trucks, when required Preferred Qualifications • 3+ years of experience in material handling, • 2 + years of experience with Manual Pallet Jacks, • Proven experience and comfortability in Picking/Packing, • Proven experience in Shipping/Receiving, • Ability to squad, bend, kneel, stand, and be active on the floor throughout the shift, • Experience with Sit-Down Forklifts or Reach Trucks is a PLUS, but not required

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Perform other duties as directed by supervision. Qualifications • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality, • Dependable, safety-conscious, and team-oriented Salary Range:$29.56 To $33.62 Hourly Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.comNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO? JESCO offers benefits after 30 days of employment, including Medical, Dental, Vision and Prescription. Enroll into a generous 401k option after 6 months. JESCO is a mid-sized company that continues to expand and grow. Join a great team that offers career advancement and start your career with JESCO! Establishes a knowledge center within the dealer organization to improve product resolution cycle times. Enables improved communication, sharing of best practices among all servicing locations. Works with the Service Managers/Service Advisors to help solve problems. Helps to improve Technician’s diagnostic and repair abilities resulting in less downtime and reduced costs for our customers. Conducts preliminary investigations into machine problems using CCMS, Machine Dashboard and Expert Alert information, external information sources, previous experiences and knowledge of machine systems. Responsibilities • Resource for Technicians, Service Managers/Service Advisors and Parts Leads to help resolve critical product problems by assisting in diagnosis and repair and sharing of best practices, • Ensures all necessary information is documented within the CCMS case prior to submission to John Deere, • Coordinates CCMS cases between Technicians and John Deere CCMS factory support as needed, • Works with John Deere as a partner in quality to help identify emerging product quality concerns and support problem resolution, • Identifies, communicates and executes continuous process improvements in Service and Parts departments to ensure internal and external customer satisfaction, • Opens work orders and provides estimated labor and parts requirements when possible for technicians to resolve issues, • Maintains up to date technical knowledge of engine, hydraulics, and electrical systems and repair manual schematics, • Assists in identifying Technical training needs or gaps by communicating with location Service Mangers / Service Advisors, • Prepares and analyzes Service department reports; uses data to help drive improvement and growth, • Maintains a positive and professional working relationship with peers, management, and support resources, with a constant commitment to teamwork and exemplary customer service, • Ensure that company’s reputation and image in the community is consistent with company core values, • May participate in Service EDUCATE Training programs required for the development of skills and knowledge, • Operates and maintains vehicles, tools and equipment required to perform job responsibilities, • Maintains a clean work area and performs work in a neat and orderly fashion, • Follows all safety rules and regulations while performing work assignments, • Maintains knowledge of John Deere and competitive products Experience, Education, Skills and Knowledge • 5+ years of experience in Service and Parts department operations; demonstrated experience consistently meeting performance metrics preferred, • Experience with basic computer functions; experience using Service ADVISOR™, Parts ADVISOR™, or other computer based diagnostic repair tools preferred, • Experience with the mechanical, electrical and hydraulic systems used in off road, construction, lawn, or heavy equipment, • Experience communicating effectively, • Experience working with customers, • Experience analyzing and interpreting data and reports, • High School Diploma, GED, or equivalent experience required; Associates degree preferred We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements:

Job Description We are seeking a Tool Maker Machinist to provide accurate tools and fixtures to support metal stamping presses. Responsibilities: • Operate machine tools to produce tooling to produce precision parts, • Build and maintain tooling, fixtures, and gages used in production, • Perform routine maintenance on machinery, • Calculate dimensions and tolerance using measuring instruments Qualifications: • Previous experience using manual machinery, i.e. lathe, knee mill, drill press, • Familiarity with heat treating of tooling, • Strong analytical and mathematical skills, • Strong attention to detail\nCompany Description Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers. Providing high quality precision parts and assemblies since 1955. Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers.\r\nProviding high quality precision parts and assemblies since 1955.

Job DescriptionAre you a highly motivated and reliable Paint Prepper? Are you looking for a collision repair company that values People and Processes while working alongside those with a Passion for auto repair? This is your opportunity! If you are tired of the mediocre shop, allow us to take you out of the average and put you into the future of the collision repair business. Each teammate is a valued part of the repair process. We support our team with the tools and technology needed to be successful: state-of-the-art paint and prepping equipment and all the training you can handle. You will expand your skills while being paid! Many of our Preppers grow into Painters. As a Paint Prepper, you will be responsible for supporting our paint technicians. In this position, you will prepare various auto parts for the paint application process and ensure quality work has been completed. Job Requirements: Prepare the vehicle for paint by sanding, removal of oils, debris, or imperfections Taping off components where paint should not be applied Assist in the application and preparation of paint after repair work is complete Buff or clean surfaces after the paint dries Correct defects on the finished product Request necessary materials Maintain an organized, clean, and safe work area Skills, Qualifications, & Requirements: 3+ years experience as a paint prepper in an auto body shop preferred Must be at least 18 years of age HS Diploma or GED, Auto Body Vo-Tech certification strongly preferred Ability to effectively communicate with others Ability to read and understand basic instructions, written estimates, and work orders Multi-tasking; adapt easily to fast-paced environments Must be able to wear a respirator Physical Requirements: Ability to stoop, bend, squat, kneel and pull Extended periods of kneeling, bending, and squatting to complete or inspect repairs Carry and lift heavy objects (up to 80lbs) Manual dexterity and eye/hand coordination to operate equipment Standing, sitting, and walking Performing repetitive motions The specific pay rate/salary offered to a candidate may be influenced by several factors including experience, education, specialized certifications from OEMs, and where the job is located. We are an equal opportunity employer and consider all qualified applicants equally regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job Description Beyond Home Health Care | NJ DDD-Approved Provider Per Diem / Contract | Statewide New Jersey | Flexible Schedule $76 – $82 per hour About Beyond Home Health Care Beyond Home Health Care is an approved provider with the New Jersey Division of Developmental Disabilities (DDD), delivering in-home therapeutic services to individuals with intellectual and developmental disabilities (I/DD) across New Jersey. We support participants enrolled in the Supports Program and Community Care Program (CCP) by providing individualized care that promotes independence, community participation, and quality of life. Position Overview We are seeking a licensed Physical Therapist to provide individualized, in-home and community-based PT services to adults with developmental disabilities. The PT will evaluate mobility, strength, balance, gait, and functional movement, and deliver person-centered interventions to maximize physical independence, prevent secondary complications, and support community participation, in accordance with NJ DDD guidelines. Key Responsibilities • Conduct comprehensive evaluations and develop individualized treatment plans aligned with each participant's Individualized Service Plan (ISP) and person-centered goals., • Deliver one-on-one therapy services in the participant's home and community settings., • Document services in compliance with DDD documentation standards, including session notes, progress notes, and outcome measures, submitted within required timeframes., • Collaborate with Support Coordinators, families, caregivers, and the interdisciplinary team to ensure continuity of care., • Provide caregiver training and home programs to reinforce therapeutic goals between sessions., • Adhere to all DDD policies, including the DDD Provider Policies & Procedures Manual, reportable incident requirements (Danielle's Law, Stephen Komninos' Law), and HIPAA confidentiality standards., • Maintain accurate billing records consistent with DDD Fee-for-Service rates and authorizations., • Complete required DDD-mandated trainings (Pre-Service, Preventing Abuse/Neglect/Exploitation, Danielle's Law, Stephen Komninos' Law, etc.). Required Qualifications • Current New Jersey license as a Physical Therapist (PT) issued by the NJ State Board of Physical Therapy Examiners., • Graduate of a CAPTE-accredited physical therapy program (DPT or equivalent)., • Minimum of one (1) year of clinical experience preferred; new graduates considered., • Current CPR/BLS certification., • Clean criminal background check and fingerprinting per NJ DDD requirements., • Reliable transportation, valid NJ driver's license, and current auto insurance., • Ability to pass DDD-required background checks including the Central Registry of Offenders Against Individuals with Developmental Disabilities (CRoff). Preferred Qualifications • Experience working with individuals with intellectual and developmental disabilities, autism spectrum disorder, or complex medical needs., • Familiarity with NJ DDD Supports Program and Community Care Program service definitions., • Bilingual (Spanish, Haitian Creole, or other languages a plus). What We Offer • $76 – $82 per hour — competitive hourly compensation., • Flexible self-directed scheduling — build your own caseload., • Caseload matched to your preferred county/region., • Supportive clinical leadership and administrative support., • Direct deposit and prompt weekly pay., • Mileage considerations between visits. Apply To apply, please submit your application through [insert application instructions].

Job Description Company Overview LD power automation is a leading engineering company specializing in marine and industrial electrical and control services and products. With extensive experience in installation, commissioning, and troubleshooting, we deliver professional and timely solutions that help our clients achieve operational excellence. Our commitment to building strong, long-term relationships is founded on trust and a deep understanding of our clients' needs. For more information, visit our website. Job Summary We’re looking for a hands-on Field Service Engineer who’s ready to dive into the world of marine and industrial power systems. If you enjoy solving real-world problems, working with your hands, and being the go-to expert when things need fixing or fine-tuning, this might be the role for you. You’ll be installing, troubleshooting, and maintaining everything from motors and switchgear to PLCs and control systems aboard large ocean-going vessels while they’re in port. It’s a mix of tech, teamwork, and travel, with plenty of variety and challenges to keep things interesting. You’ll work closely with customers, vendors, and manufacturers to make sure systems run smoothly and safely. If you’re someone who takes pride in doing things right and enjoys working in dynamic environments, we’d love to hear from you. Key Responsibilities • Communication between cooperating parties and assist to ensure smooth operation of electrical and mechanical equipment., • Performing maintenance including field installation, validation, and testing of electronic, electric and mechanic components., • Troubleshooting by observing mechanical devices in operation, listening for problems and using electrical meters, calibration equipment, mobile and handheld computer systems, hand tools, PLC, operator interface, data collection, and safety-related control systems., • Remove and replace defective parts by properly dismantling devices using hoists, cranes, and hand and power tools, examining form and texture of parts., • Maintain a safe and clean working environment by complying with company procedures, rules, and regulations. Qualifications • Electrical Engineering Bachelor’s degree or a combination of a relevant certificates, Associate or Technical degree and 4-5 years of relevant work experience., • Must possess sufficient manual dexterity to operate tools, machinery and repair equipment and lift at least 40 pounds unassisted., • Ability to walk, stoop, kneel, crouch, crawl, and climb up/down ladders and stairs, including on uneven, moving, or slippery surfaces., • Self‑motivated and capable of working independently and as part of a team., • Ability to remain focused, composed, and effective in high‑pressure or stressful situations., • Demonstrates a strong sense of responsibility and ownership, consistently taking proactive action in tasks, assignments, and unexpected situations., • Ability to obtain a TWIC card (Transportation Worker Identification Credential). Skills & Competencies • Knowledge of low voltage and line voltage AC and DC systems and relays, high voltage experience including terminations a plus., • Basic hydraulic and machine repair knowledge a plus., • Excellent written and verbal communication skills Electrical/Mechanical aptitude, advanced skills in one or more of the following areas a plus: software, electronics, low and high voltage electrical, mechanical and propulsion systems, automation, PLC programming, Ethernet network/Serial communication., • Ability to read Schematics., • Ability to write reports, effectively present information and respond to questions from groups of managers, clients, and customers., • Proficiency in installation, troubleshooting, and commissioning., • Ability to collaborate with clients and ensure timely service delivery., • Must be an avid user of computer software including Microsoft Office. Working Conditions • Working conditions are marine/industrial environments which require the use of company uniform and safety equipment, to include but not limited to safety glasses, hearing protection, steel toe work boots, hardhat and safety vests., • Comfortable working aboard vessels, in confined spaces, and in challenging environmental conditions including rain, ice, snow, wind, heat, and other weather extremes., • Available to work flexible, on-call hours, including varying and unpredictable shift schedules., • Regular local travel with occasional international trips as required. Other • Must be able to pass a drug screening and background check upon request for customer site access. A clean driving record is required., • As our business and operations evolves to meet changing market needs, team members are expected to adapt seamlessly and undertake additional essential projects and tasks when required. Compensation & Benefits LD power automation provides competitive compensation and benefits to acknowledge employees’ contributions. Base pay is determined by job-related knowledge, skills, experience, location, and internal equity considerations: • 401(k)/Employer Matching, • Health, Dental, and Vision Insurance, • Paid Time Off

Job Description Experienced Physical Therapist – Outpatient Rehab Opportunity Physical Therapist (PT) | South Plainfield, New Jersey Annual Salary: $90,000–$100,000, based on experience Work Hours: Monday–Friday, 9:00 AM–5:00 PM Typical Patient Flow: 1–2 patients per hour Clinical Setting: Orthopedic Outpatient Physical Therapy Office Job Description We're searching for an outpatient Physical Therapist in South Plainfield, NJ who can independently evaluate and treat patients across a range of orthopedic conditions. Patients may be recovering from surgery, managing an injury, rebuilding strength after periods of limited mobility, or working toward returning to normal work, recreational, and everyday activities. Your role is to determine where each patient is functionally, establish realistic rehabilitation goals, and use appropriate physical therapy interventions to help them progress. This is a full-time weekday opportunity for a PT with prior outpatient experience who is comfortable managing evaluations, ongoing treatment, reassessments, and documentation. Your Day-to-Day Responsibilities • Evaluate new patients and identify physical and functional limitations, • Establish individualized rehabilitation goals and plans of care, • Provide orthopedic physical therapy treatment, • Guide patients through strengthening, mobility, flexibility, and functional exercises, • Incorporate manual techniques when appropriate to the treatment plan, • Track measurable changes in patient function, • Modify exercises and interventions as recovery progresses, • Explain home programs and provide practical patient education, • Maintain organized and accurate treatment records, • Support safe transitions back to normal activities Requirements • Active Physical Therapist (PT) license, • DPT or MSPT degree, • Outpatient physical therapy experience required, • Experience evaluating and treating orthopedic conditions, • Strong clinical judgment and patient communication skills Benefits • Health Insurance, • Dental & Vision Insurance, • 401(k) with Company Match, • 3 Weeks PTO See If This Role Fits Your Next Chapter Send your resume and take the first step toward joining a practice focused on quality orthopedic rehabilitation.

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off, • Competitive salary, • Dental insurance, • Free uniforms, • Vision insurance About the Role: A&D Industrial & Marine Repair is looking for a skilled Manual Machinist to join our team in Port Reading, NJ. This is a hands-on role where your precision craftsmanship and machining expertise will be put to work in a dynamic industrial environment. If you take pride in quality work and thrive in a shop setting, we want to hear from you! Responsibilities: • Set up and operate manual machine tools including lathes, mills, grinders, and drill presses, • Read and interpret blueprints, technical drawings, and engineering specifications, • Fabricate, repair, and modify metal parts and components for industrial and marine applications, • Measure and inspect finished parts using precision instruments such as micrometers, calipers, and gauges, • Perform routine maintenance and adjustments on manual machinery to ensure optimal performance, • Collaborate with shop supervisors and technicians to meet project deadlines and quality standards, • Maintain a clean, safe, and organized work environment in compliance with shop safety protocolsRequirements:, • Proven experience as a Manual Machinist in an industrial, marine, or heavy equipment environment, • Proficiency operating manual lathes, milling machines, and surface grinders, • Ability to read and interpret blueprints, schematics, and technical drawings, • Strong knowledge of metals, tolerances, and machining techniques, • Experience using precision measuring tools and inspection equipment, • Attention to detail with a commitment to producing high-quality, accurate work, • Ability to work independently and as part of a team in a fast-paced shop environmentAbout Us: A&D Industrial & Marine Repair has built a strong reputation in the Port Reading, NJ area as a trusted provider of industrial and marine repair and fabrication services. Our customers rely on us for our precision craftsmanship, fast turnaround, and commitment to getting the job done right the first time. We foster a skilled, tight-knit team environment where experienced tradespeople are valued and their expertise makes a real impact every day.

Job DescriptionAbout Integrated Health 21 Integrated Health 21 (IH21) is a leading provider of worksite wellness screenings and vaccination clinics across the continental United States. Headquartered in Pittsburgh, PA, with offices in New York, Wisconsin, and Ohio, IH21 partners with employers and insurance companies to deliver customized health and wellness events. Our mission is simple: to help employees better understand their health and support healthier workplaces. Position Overview We are seeking skilled, professional Phlebotomists with corporate wellness or biometric screening experience to support our on-site employee health screening events. This role is engaged on an as-needed basis and is classified as a 1099 independent contractor position. Events are generally conducted during early mornings and daytime hours on weekdays, offering a flexible schedule for supplemental work. Purpose of the Position To perform health risk screening assessments and provide clear, supportive counseling on screening results at employee health screening events. Primary Duties & Responsibilities • Welcome participants and guide them through the screening process, • Obtain height (stadiometer) and weight measurements, • Measure resting blood pressure using a manual cuff, • Perform fingerstick blood collection and operate Cholestech LDX/CardioChek equipment accurately, • Assess lipid panel and glucose results, • Perform venipuncture blood draws (when required) within two attempts, • Accurately document screening data via paper forms or electronic tablets, • Complete basic data entry using electronic systems, • Assist with troubleshooting screening or equipment issues, • Support setup, breakdown, and transport of screening equipment, • Assist with medical emergencies (e.g., fainting, hypoglycemia, seizures, syncope, cardiac arrest), including initiating emergency response and providing CPR as needed, • Maintain strict adherence to HIPAA and confidentiality standards, • Perform additional screening modalities or duties as trained and assigned Physical Demands • Ability to work in a variety of client-site environments, • Stand for up to 6 hours, • Bend, lift, and carry supplies and equipment (up to 30 lbs; push/pull up to 50 lbs), • Use arms to properly operate screening equipment (e.g., stadiometer), • Navigate stairs while transporting equipment, • Safely assist participants during medical emergencies as required by protocol Qualifications Education: • High school diploma or GED required, • Completion of a phlebotomy or medical assistant program preferred, • Completion of a nursing program preferred Requirements: • Minimum of 2 years of clinical experience required, • Previous biometric screening experience preferred, • Current CPR/BLS Certification required, • Current phlebotomy and/or medical certification preferred or as required by state regulations, • Experience obtaining anthropometric measurements (manual BP, height, weight, BMI), • Proven proficiency in venipuncture and/or fingerstick capillary blood draws in accordance with regulatory and infection control standards, • Ability to independently perform all clinical duties and exercise sound clinical judgment Why Work With IH21? • Flexible, PRN scheduling, • Travel reimbursement, • Referral program, • Opportunity to work with a nationwide wellness organization making a meaningful impact Integrated Health 21 is an Equal Opportunity Employer

Job Description Do you want to work in a fun, energetic environment that practices patient-centered care and values work-life balance? Forest Hill Physical Therapy (FHPT) is your place. We are seeking a Physical Therapist to join our growing business! Through our innovative care pathway, we have integrated medical and fitness models to optimize patient care. As a physical therapist at Forest Hill physical therapy, you will have the opportunity to practice and grow professionally in a judgement-free environment without individual financial productivity requirements and no double-booking patient scheduling. Position Benefits • Protective Documentation time, • New graduates are encouraged, • On-Sight Continuing Education, • Career Advancement Opportunities, • Great Work Environment Qualifications • Must hold an active NJ state license to practice physical therapy, • Must hold a current BLS CPR certification Duties and Responsibilities: • Conducts a physical therapy evaluation/examination and devises a physical therapy plan of care based on the subjective, objective, special testing and functional findings., • Provides, coordinates, and the administration of physical modalities, therapeutic interventions, manual care, assistant device training, gait training and therapeutic functional activities utilized in physical therapy as indicated by the established plan of care., • Accurately documents physical therapy care perform during initial evaluation, treatment notes, progress reports, discharge reports and any additional reports as required by other referring physicians and other agencies according to company policies and quality procedures., • Provides quality-value care to every patient with compassion, empathy and collaboration., • Coordinates plan of care and treatment plan among other physical therapists, physical therapist’s assistant, and accessory staff, • Charges effectively and appropriately for all services rendered., • Part takes in clinical instruction. Company DescriptionTo learn more about us visit our website www.foresthillpt.comTo learn more about us visit our website www.foresthillpt.com

Job Description Center for Oral & Facial Surgery https://www.centerfororalfacialsurgery.com/ Surgical Assistant – Oral Surgery Full-Time | Westfield | This is an in-office position. Are you passionate about patient care and looking to make an impact in a dynamic surgical setting? If you’re a motivated, detail-oriented individual who excels in a fast-paced environment, we invite you to bring your skills to our team and grow with us! Position Overview: Step into the dynamic world of oral surgery as an Oral Surgeon Surgical Assistant! Your role is pivotal, aiding surgeons with precision during procedures and meticulously documenting patient care. From preoperative tasks to maintaining sterile environments, your expertise ensures smooth operations. Participate in strategic discussions with surgeons, monitor patient status, and handle advanced equipment with finesse. Dive into the heart of dental care, obtaining vital radiographs and crafting detailed patient narratives. Who We Are: Our practice is dedicated to exceptional oral surgery in a comforting environment, prioritizing patient needs through collaboration with their general dentist. Our vision is global leadership in oral health, focusing on outstanding patient experiences and industry standards. We foster a positive work environment with career growth opportunities, comprehensive benefits, and a supportive culture that values work-life balance. Our goal is to empower employees to deliver excellent patient care and build strong relationships with referring dentists. What We Offer: We prioritize your personal and professional well–being, covering aspects from health to financial and social welfare. • Competitive Pay, Bonus potential, and Annual Merit Reviews, • Paid Time Off, • 401k Plan w/Company Match, • Health Savings Account (HSA) with HDHP health plans, • Medical (including Virtual Care), Dental and Vision Coverage, • Basic and Supplemental Life Insurance, • Short & Long-Term Disability, • Employee Assistance Program, • BLS/CPR Certification, • Career Path Advancement to Clinical or Management positions, • National Discount and Rewards Marketplace Required Qualifications: • A high school diploma or equivalent, • BLS Certification (or completed within 1 month of hire), • Strong teamwork and independent work capabilities, demonstrating good judgment and critical thinking., • Passion for ensuring safety and exceptional attention to detail, vigilance, and meticulousness., • Basic computer proficiency., • Excellent manual dexterity and superior listening skills, especially in emergency scenarios. Preferred Qualifications: • Previous oral surgery experience is beneficial., • DAANCE certification is desirable., • Licensed dental assistant status is preferred., • Radiology certification is a plus. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, age, national origin, disability, genetic information, sexual orientation, gender identity and protected veterans’ status. E-Verify Participation Notice: This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact the appropriate federal agency before taking any action against you, including terminating your employment. Know your Right to Work

Job Description Beyond Home Health Care | NJ DDD-Approved Provider Per Diem / Contract | Statewide New Jersey | Flexible Schedule Compensation: $72 – $78 per hour About Beyond Home Health Care Beyond Home Health Care is an approved provider with the New Jersey Division of Developmental Disabilities (DDD), delivering in-home therapeutic services to individuals with intellectual and developmental disabilities (I/DD) across New Jersey. We support participants enrolled in the Supports Program and Community Care Program (CCP) by providing individualized care that promotes independence, community participation, and quality of life. Position Overview We are seeking a licensed Speech-Language Pathologist to provide individualized, in-home and community-based speech, language, communication, and swallowing services to adults with developmental disabilities. The SLP will evaluate and treat expressive/receptive language, articulation, social communication, AAC needs, and dysphagia, in accordance with NJ DDD guidelines and person-centered planning. Key Responsibilities Conduct comprehensive evaluations and develop individualized treatment plans aligned with each participant's Individualized Service Plan (ISP) and person-centered goals. Deliver one-on-one therapy services in the participant's home and community settings. Document services in compliance with DDD documentation standards, including session notes, progress notes, and outcome measures, submitted within required timeframes. Collaborate with Support Coordinators, families, caregivers, and the interdisciplinary team to ensure continuity of care. Provide caregiver training and home programs to reinforce therapeutic goals between sessions. Adhere to all DDD policies, including the DDD Provider Policies & Procedures Manual, reportable incident requirements (Danielle's Law, Stephen Komninos' Law), and HIPAA confidentiality standards. Maintain accurate billing records consistent with DDD Fee-for-Service rates and authorizations. Complete required DDD-mandated trainings (Pre-Service, Preventing Abuse/Neglect/Exploitation, Danielle's Law, Stephen Komninos' Law, etc.). Required Qualifications Current New Jersey license as a Speech-Language Pathologist issued by the NJ Audiology and Speech-Language Pathology Advisory Committee. ASHA Certificate of Clinical Competence (CCC-SLP) required; CFs considered with appropriate supervision. Master's degree in Speech-Language Pathology from an accredited program. Minimum of one (1) year of clinical experience preferred; CFs and new graduates considered. Current CPR/BLS certification. Clean criminal background check and fingerprinting per NJ DDD requirements. Reliable transportation, valid NJ driver's license, and current auto insurance. Ability to pass DDD-required background checks including the Central Registry of Offenders Against Individuals with Developmental Disabilities (CRoff). Preferred Qualifications Experience working with individuals with intellectual and developmental disabilities, autism spectrum disorder, or complex medical needs. Familiarity with NJ DDD Supports Program and Community Care Program service definitions. Bilingual (Spanish, Haitian Creole, or other languages a plus). What We Offer $72 – $78 per hour — competitive hourly compensation. Flexible self-directed scheduling — build your own caseload. Caseload matched to your preferred county/region. Supportive clinical leadership and administrative support. Direct deposit and prompt weekly pay.

Job Description Elizabeth Park is looking for PRN Physical Therapist, PT to join our incredible team! We're not just a workplace; we're a community driven by excellence. We take immense pride in what sets us apart - our exceptional leadership, a warm and friendly work environment, and a reputation that we've worked hard to earn. If you're ready for a rewarding career experience, your journey begins here! Physical Therapist, PT Benefits: • Competitive wages based on experience, • Daily pay option available, • Career advancement opportunities / tuition reimbursement, • Complementary uniform, • Friendly work environment, • Referral bonus Physical Therapist, PT Job Description: The Physical Therapist (PT) plays a pivotal role in the rehab department at our skilled nursing facility, promoting the physical well-being and functional recovery of our residents. Physical Therapist, PT Responsibilities: • Assessment and Evaluation: Conduct comprehensive physical assessments to determine residents' physical impairments and functional limitations, focusing on mobility, balance, and gait., • Individualized Care Plans: Develop individualized treatment plans based on assessments, with clear goals for improving residents' mobility and reducing pain., • Section GG Data Collection: Accurately and consistently collect Section GG data as required for Annual, Quarterly, Falls, and Significant Change assessments., • Treatment: Administer physical therapy interventions, including exercises, manual techniques, and modalities, to enhance residents' physical function., • Education: Educate residents, family members, and care staff on safe mobility techniques and exercises for continued progress. Conducts remote check-in through remote therapeutic monitoring (RTM) with discharged patients to home or next level of care., • Documentation: Comfortable and knowledgeable with Point of Service( PoS) care delivery and documentation. Maintain detailed and up-to-date documentation of resident evaluations, treatment plans, daily and progress notes, HMO/Manage care progress updates in EMRs (Net Health/PCC)., • Interdisciplinary Collaboration: Collaborate with the rehab team, including Occupational Therapists and Speech-Language Pathologists, to ensure comprehensive care for residents. Physical Therapist, PT Qualifications: • State licensure as a Physical Therapist., • EMR and MS office applications., • CPR/BLS certification., • Knowledge of Section GG data collection and documentation requirements., • Strong clinical and interpersonal skills., • Excellent written and verbal communication skills., • Ability to supervise assistants, technicians/aids and student/interns., • Modality Certification + Join us at Elizabeth Park Rehab, and start a career that's not just about work, but about making a meaningful difference in the lives of others. Your future starts here. Come be a part of our extraordinary team!

Job DescriptionDescription: Date posted: July 7, 2026 Pay: $25.00 - $32.00 per hour Job description: THE NORTHWARD CENTER TITLE: LICENSED PRACTICAL NURSE REPORT TO: DIRECTOR OF NURSING SUMMARY DESCRIPTION The incumbent, under the supervision of DON, provides skilled nursing care to the clients. The incumbent ensures that all work conforms to company policies and procedures, safety and regulatory laws and standards. DUTIES AND RESPONSIBILITIES • Provide nursing care according to the individual plan of care, physician's order and emergency Ensure the accuracy and completeness of medical record documentation., • Performs client assessment and communicate with DON in developing and implementing client's plan of, • Coordinate with other internal and external ancillary services (i.e.: Pharmacy, Dental, Rehabilitation, PT, OT, Speech Therapy) to ensure quality client Communicates with physicians to provide follow up care., • Maintain nursing station; ensure that stock medications and emergency items are in, • Maintains established center's policies and procedures, objectives, quality assurance program, safety and infection control, • Maintains and respects client's and employee's confidentiality. Promotes adherence to the Client's Bill of, • Perforn1s duties of Licensed Practical This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties or responsibilities that management may deem necessary from time to time. POSITION SUPERVISED Directly: Certified Nursing assistant QUALIFICATIONS Education: LPN with New Jersey License CPR certification an valid malpractice insurance policy. Experience: 1-2 year in a licensed health care facility. Geriatric and long-term care experience preferred. Bilingual (English/ Spanish) preferred. KNOWLEDGE, SKILLS, AND ABLITIES Knowledge of company policies and procedures. Knowledge of aging process to the illness and ages of the clients served. Knowledge of NJ Medicaid Service Manual for Medical Day Care services. Knowledge of NJ Dept. of Health Manual of Standards for adult Day Health Care Licensure. Knowledge of applicable state and federal environmental and OSHA regulations. Ability to demonstrate excellent English communication skills, both orally and in writing. Ability to demonstrate excellent interpersonal skills. Ability to demonstrate excellent organizational skills. Ability to handle multiple priorities. Ability to work in a cross-functional capacity. Ability to work flexible schedules on demand. CONDITIONS (Environment, Physical demands, Hazards, etc) • Exposure to biological agents(i.e.: body fluids, micro-organisms), • Continuous walking/standing up to 4, • Occasional lifting up to 50, • Occasional pushing/pulling up to 50, • Frequent overhead, • Frequent bending, twisting, and Job Type: Full time Job Type: Part-time Experience: • LPN: 1 year (Required) Language: • Bilingual English/Spanish (Preferred) License/Certification: • LPN (Required), • BLS Certification (Required) Requirements: Experience: • LPN: 1 year (Required) Language: • Bilingual English/Spanish (Preferred) License/Certification: • LPN (Required), • BLS Certification (Required)

Job Description POSITION SUMMARY The Senior FP&A Analyst is the primary analytical partner to the Business Controller and a key financial support resource across the company. Reporting to the Business Controller, the role builds the models, reporting, and analysis that turn financial and operational data into insight—so that senior management and the Sales, Marketing, and Manufacturing Operations teams can make faster, better-informed decisions. DUTIES & RESPONSIBILITIES • Support the annual budget, monthly forecast, standard cost, cash forecast, and multi‑year strategic planning cycles so the Company operates against a single, reliable financial plan and can anticipate performance rather than react to it, by gathering and validating stakeholder inputs, assumptions, constraints, and timelines, consolidating them into structured budget and forecast models, and by maintaining the planning calendar — mapping deliverables and dependencies and resolving gaps or bottlenecks before they impact the cycle., • Own the bridge between the demand plan and the financial plan so volume, revenue, and margin assumptions are consistent across Sales, Operations, and Finance and the forecast is defensible at SKU and channel level, by participating in the monthly S&OP cycle, converting the consensus demand plan into a dollarized revenue and margin forecast, and quantifying the financial impact of demand shifts, supply constraints, and import timing., • Develop and manage SG&A expense projections and allocations to give leadership clear visibility and accountability over the Company’s cost base and spending trends, by building bottom-up expense models by department and cost center, working with budget owners to challenge assumptions, reconciling projections to actuals each period, and maintaining the account and cost‑center mapping through the system transition so prior‑year comparatives remain valid., • Build and continuously refine COGS and standard‑cost projection methodologies so margin and cost forecasts are accurate, consistent, and defensible across products, plants, and sourcing origins, by maintaining cost models that incorporate material, labor, and overhead drivers as well as landed‑cost components — ocean freight, duty, and tariff exposure for imported product, testing them against actual results, and updating standards as volumes, rates, tariffs, and operational conditions change., • Consolidate and review product, customer, channel, and plant margins and performance to surface the profitability drivers and risks that matter most to the business, by aggregating margin data across the portfolio, analyzing mix, pricing, and cost dynamics including trade spend, deductions, allowances, and e‑commerce fee structures, and translating the findings into actionable insight for Finance and commercial stakeholders., • Lead the preparation of the monthly financial reporting package, executive memo, together with materials for banks and senior leadership so decision-makers receive a timely, accurate, and well-supported view of financial performance compiling the required financial statements, KPIs, and commentary, driving thoughtful analysis of the P&L and key business metrics, and assembling polished, brand-consistent presentations and supporting schedules that are complete and internally consistent before distribution., • Conduct variance analysis versus budget and forecast across the P&L and key metrics to hold the business accountable to its commitments and explain deviations from plan, by quantifying variances into structured waterfall bridges that isolate volume, price, mix, and cost effects, partnering with business stakeholders to gather detailed drivers, and documenting clear, decision-oriented explanations and recommended actions., • Forecast and analyze inventory and working capital so the Company can fund growth without tying up cash in the wrong inventory, by modeling inventory coverage and receipts against the demand plan and the open purchase order pipeline, quantifying excess and obsolescence exposure, and feeding inventory, receivable, and payable assumptions into the cash forecast., • Develop and maintain management reporting and KPI dashboards to give senior leadership and business partners real-time, decision-ready visibility into financial and operational performance, by building and automating reporting from ERP and BI sources, monitoring progress against plans, and highlighting trends and exceptions that require attention., • Identify, recommend, and help implement process and content improvements to financial reporting and planning to make the finance function faster, more accurate, and more insightful over time, by evaluating current workflows and tools, proposing enhancements, and contributing to standardization, automation, and continuous improvement initiatives, with priority on the ERP transition and on replacing manual workbook routines with repeatable, auditable processes., • Develop capital budgeting models to evaluate risk and ROI for proposed investments so capital is allocated to the initiatives that create the most value for the Company, by building business cases with ROI, payback, cash flow, and scenario analysis and presenting the results and recommendations to Finance and senior leadership., • Perform routine and ad‑hoc financial modeling and business analysis to answer time-sensitive questions and support decision-making across the organization, by leveraging advanced spreadsheet and modeling tools and drawing on ERP and business intelligence data to structure the analysis and deliver well-supported conclusions. REQUIRED EDUCATION, SKILLS & EXPERIENCE • Bachelor’s degree in accounting, Finance, Business, or a related field; MBA a plus, • 4 to 10 years of relevant financial analysis experience, including building and maintaining financial models, • Strong analytical skills; demonstrated ability to efficiently capture, manipulate, and transform data into information to reach clear conclusions, • Working knowledge of planning and performance processes, including annual budget, monthly forecast, and periodic business reviews, • Experience in a manufacturing, consumer products, or distribution environment, including standard costing and retail / e‑commerce channel economics, strongly preferred, • Detail-oriented, with the ability to translate complex analysis into clear insights, • Excellent written and verbal communication skills, • High degree of autonomy and disciplined written communication, with the ability to work effectively with a manager and stakeholders in different locations and time zones, • Collaborative team player able to build constructive relationships with staff and management, • Strong problem-solving skills with a collaborative mindset, • Ability to apply knowledge of Generally Accepted Accounting Principles (GAAP), • Experience with Enterprise Resource Planning (ERP) systems and Business Intelligence tools strongly preferred; hands-on involvement in an ERP migration or implementation a strong plus, • Advanced Excel (including advanced data modeling, query automation, and large‑dataset transformation) and PowerPoint skills; SQL a plus; comfort leveraging AI tools to improve analysis and productivity DISCLAIMER: The duties listed above are intended only as illustrations of the various types of work that may be performed and is not an inclusive summary of job duties and responsibilities. This job description is subject to change by the Company as the needs of the Company and requirements of the job change.

Job DescriptionPhysical Therapist (PT) – Senior Living Visits Full-Time or Per Diem | Somerset, Middlesex, Monmouth & Union Counties, NJ $10,000 Sign-On Bonus for Full-Time! BAYADA Home Health Care is seeking an experienced Physical Therapist (PT) to join our new Central New Jersey Senior Living team, a Medicare-certified home health office. In this role, you'll provide one-on-one physical therapy services to adult and geriatric clients living in assisted living, independent living, senior congregate living, 55+ communities, and intermediate care facilities serving individuals with intellectual disabilities throughout Somerset, Middlesex, Monmouth, and Union Counties, NJ. This position may also include visits in traditional home health community settings. As a valued member of our interdisciplinary care team, you'll help clients improve mobility, maximize independence, and safely remain in the place they call home. Responsibilities • Perform skilled physical therapy visits throughout designated territories., • Complete comprehensive physical therapy evaluations and ongoing reassessments., • Assess mobility, strength, balance, gait, transfers, endurance, range of motion, and overall functional status., • Develop and implement individualized treatment plans using evidence-based interventions, including therapeutic exercise, gait training, balance training, and manual therapy techniques., • Implement skin integrity interventions to help prevent wound development and promote healing when appropriate., • Collaborate with nurses and interdisciplinary team members to coordinate exceptional patient care., • Educate clients, families, and caregivers on therapeutic exercises, safety strategies, mobility techniques, and disease management., • Complete timely and accurate documentation using BAYADA's electronic medical record (EMR) system.Qualifications, • Current New Jersey Physical Therapist (PT) license., • Minimum of one year of recent experience as a Physical Therapist., • Graduate of an accredited Physical Therapy program approved by the American Physical Therapy Association (APTA) or equivalent accrediting body., • Ability to work independently and effectively manage time., • Strong communication, organizational, and clinical assessment skills., • Experience with electronic medical records (EMR) preferred.Why BAYADA? At BAYADA, our employees are our greatest asset. We are committed to supporting your success through ongoing education, career development, and a culture built on compassion, excellence, and reliability. Benefits may include: • Weekly pay and direct deposit, • Mileage reimbursement, • Paid holidays, vacation, and sick time, • Medical, dental, vision, and employer-paid life insurance, • 401(k) with company match, • Scholarship and continuing education opportunities, • One-on-one training and mentorship, • Employee recognition and referral programs, • Career advancement through specialized clinical career paths, • Employee Assistance Program (EAP) BAYADA believes our clients and their families deserve home health care delivered with compassion, excellence, and reliability. Join an innovative Senior Living team where you'll provide exceptional one-on-one care while building a rewarding career with an industry leader. Apply today for immediate consideration. Additional Information: Base Pay, depending upon qualifications, status, and subject to negotiation: $75.00 - $80.00 per point for full time status ($117,000 - $124,800 annual earning potential) $80.00 - $85.00 for per diem status $10,000 Sign-On Bonus for Full-Time PTs BAYADA believes that our clients and their families deserve home health care delivered with compassion, excellence, and reliability. Be part of a caring, professional team that is instrumental in providing the highest quality care while developing your career with an industry leader. As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job DescriptionAssistant Maintenance Director Rate: $27 to $30 Per hour (Based on Experience) BENEFITS: Medical, Dental & Vision Insurance 401K Holiday Pay Paid Time Off Overtime Available Full Time Same Day Pay!! Refer a Friend Bonus! Weekly Employee Appreciation Event "Thankful Thursday"! About us: Sinai Post Acute is committed to providing compassionate, high-quality care in a supportive, team-focused environment. We believe great care starts with great people, which is why we invest in our employees through accessible leadership, recognition programs, and the resources they need to succeed. If you're looking for a workplace where you'll be valued, supported, and able to make a meaningful difference every day, we'd love to have you on our team. POSITION SUMMARY: The Assistant Maintenance Director supports the Maintenance Director in the daily oversight of the facility’s physical plant. This role is a blend of "hands-on" technical work and administrative supervision. You will help manage the maintenance team, coordinate work orders, and ensure the facility remains in peak condition and in full compliance with safety regulations. RESPONSIBILITIES & ACCOUNTABILITIES: Leadership Support: Partner closely with the Maintenance Director to supervise the department and ensure all repairs are completed efficiently. Facility Upkeep: Maintains the building and grounds in a clean, safe, and functional condition, proactively identifying areas for improvement. Technical Expertise: Performs "hands-on" repairs involving plumbing, electrical, carpentry, HVAC, and general masonry. Systems Oversight: Assists in maintaining the fire alarm, emergency generator, and sprinkling systems; ensures all safety checks are documented. Departmental Management: Assists in assigning work duties, scheduling staff, and orienting new maintenance employees. Director Proxy: Assumes the full responsibilities of the Maintenance Director during their absence. Inventory & Supplies: Helps monitor tool inventory and requisitions supplies to ensure the team has the necessary equipment. On-Call Availability: Remains on-call for 24-hour emergency response as part of the management rotation. Resident Service: Ensures all maintenance tasks are performed with a "Resident First" mentality, respecting the privacy and rights of all individuals in the facility. SPECIFIC EDUCATIONAL/ VOCATIONAL REQUIREMENTS: High School degree or equivalent. Strong technical knowledge of wiring, plumbing, and HVAC systems. 1 to 2 years of supervisory or assistant management experience preferred. Must be able to read, write, and communicate effectively in English. JOB SKILLS: Organizational Excellence: Ability to manage multiple projects and a team of technicians simultaneously. Physical Health: Agile and capable of heavy lifting and manual labor as required. Collaborative Spirit: Ability to interact professionally with staff, residents, family members, and state inspectors. Regulatory Knowledge: Familiarity with safety, health, and fire codes. Compliance: Provide annual verification of a negative TB skin test.

Job Description This job is hybrid in Richmond, VA. Do not submit your resume if you can't work on-site in Richmond, VA Our client has an opening for a System Analyst (806542) This position is up to 12 months with the option of extension. The client is located in Richmond, VA Please send rate and resume. Bachelors degree Required 4 Years Experience in business analysis, requirements gathering, document/data lifecycle management, and process improvement. Required 7 Years Experience supporting ECM strategies and enterprise data practices in a government, investment or financial services environment. Required 3 Years Excellent critical thinking and problem-solving skills with strong attention to detail. Required Proven experience creating clear, structured technical documentation (e.g., requirements, process maps, data and document flows). Required Strong verbal and written communication skills with the ability to translate complex concepts into clear business terms. Required Demonstrated ability to collaborate effectively in a cross-functional team environment Required Demonstrated ability to work independently and proactively identify and address areas needing attention or improvement. Required Familiarity with process automation tools used to improve efficiency and reduce manual effort. Highly desired Experience working with reporting tools and dashboards to support business insights and decision-making. Highly desired Understanding of investment, financial services, or a related business environment. Highly desired

Job Description Therapist Owned Home Outpatient Practice Per diem Position We are seeking highly motivated physical therapists who share our dedication to achieve clinical excellence in their practice. As an employee of Leading Rehabilitation, you will be exposed to exciting cases not commonly seen in your typical outpatient setting. Our excellent reputation of clinical expertise has resulted in strong referral sources seeking specialized treatment for conditions such as prosthetic fitting and training, neurological conditions (brain injury, spinal cord injury and stroke), complex pain syndromes (referred neurological pain into the extremities, head, face and phantom pain), pelvic health, TMJ and post partum pain just to name a few. Qualifications · A valid New Jersey physical therapy license in good standing (or pending NJ state boards for recent graduates) · A driver’s license and mode of transportation. Who We Are Leading Rehabilitation is a physical therapist owned and operated outpatient private practice specializing in physical and occupational therapy. We are committed to clinical excellence, evidence-based practice and professional growth. We pride ourselves in high quality, ONE-ON-ONE patient care, focused on manual skills to provide a WHOLE PATIENT approach to rehabilitation. Our services are delivered in the homes of our patients in Middlesex county. We the owners, are highly skilled clinicians who are APTA members of high moral and ethical standards. We observe and respect our profession and the laws that govern our practice. We are committed to the advancement of our profession through education, clinical excellence and mentorship of our colleagues. We will give you a platform to perform at your clinical best and provide you with any mentorship needed to achieve your professional goals.

Job Description Beyond Home Health Care | NJ DDD-Approved Provider Per Diem / Contract | Statewide New Jersey | Flexible Schedule Compensation: $76 – $82 per hour About Beyond Home Health Care Beyond Home Health Care is an approved provider with the New Jersey Division of Developmental Disabilities (DDD), delivering in-home therapeutic services to individuals with intellectual and developmental disabilities (I/DD) across New Jersey. We support participants enrolled in the Supports Program and Community Care Program (CCP) by providing individualized care that promotes independence, community participation, and quality of life. Position Overview We are seeking a licensed Physical Therapist to provide individualized, in-home and community-based PT services to adults with developmental disabilities. The PT will evaluate mobility, strength, balance, gait, and functional movement, and deliver person-centered interventions to maximize physical independence, prevent secondary complications, and support community participation, in accordance with NJ DDD guidelines. Key Responsibilities Conduct comprehensive evaluations and develop individualized treatment plans aligned with each participant's Individualized Service Plan (ISP) and person-centered goals. Deliver one-on-one therapy services in the participant's home and community settings. Document services in compliance with DDD documentation standards, including session notes, progress notes, and outcome measures, submitted within required timeframes. Collaborate with Support Coordinators, families, caregivers, and the interdisciplinary team to ensure continuity of care. Provide caregiver training and home programs to reinforce therapeutic goals between sessions. Adhere to all DDD policies, including the DDD Provider Policies & Procedures Manual, reportable incident requirements (Danielle's Law, Stephen Komninos' Law), and HIPAA confidentiality standards. Maintain accurate billing records consistent with DDD Fee-for-Service rates and authorizations. Complete required DDD-mandated trainings (Pre-Service, Preventing Abuse/Neglect/Exploitation, Danielle's Law, Stephen Komninos' Law, etc.). Required Qualifications Current New Jersey license as a Physical Therapist (PT) issued by the NJ State Board of Physical Therapy Examiners. Graduate of a CAPTE-accredited physical therapy program (DPT or equivalent). Minimum of one (1) year of clinical experience preferred; new graduates considered. Current CPR/BLS certification. Clean criminal background check and fingerprinting per NJ DDD requirements. Reliable transportation, valid NJ driver's license, and current auto insurance. Ability to pass DDD-required background checks including the Central Registry of Offenders Against Individuals with Developmental Disabilities (CRoff). Preferred Qualifications Experience working with individuals with intellectual and developmental disabilities, autism spectrum disorder, or complex medical needs. Familiarity with NJ DDD Supports Program and Community Care Program service definitions. Bilingual (Spanish, Haitian Creole, or other languages a plus). What We Offer $76 – $82 per hour — competitive hourly compensation. Flexible self-directed scheduling — build your own caseload. Caseload matched to your preferred county/region. Supportive clinical leadership and administrative support. Direct deposit and prompt weekly pay. Mileage considerations between visits.