Hvac helper jobs in Newark, New JerseyCreate job alerts

Job Description POSITION DESCRIPTION: Tower Water is a long-standing water treatment company in need of additional staff to help us through our busy seasons. We are seeking candidates who are passionate about working with their hands, reliable, and have a can-do attitude. You must be a responsive individual that is enthusiastic about having a schedule that changes regularly and be able to adapt into all types of construction environments. This is a temporary, entry-level position, with high potential to be offered an opportunity to return for the Spring season. If a full-time position becomes available, we do review seasonal staff first. We are hiring for our Fall season; this assignment could be extend based on our workload. Assignment Dates 9/8/2026 to 12/4/2026 Requirements • Start at our warehouse in Somerset NJ then travel to jobsites in NYC/NJ with Technician in company vehicle., • Reliable and willing to meet the technician as early as 5:00 a.m. to travel to jobsites., • Ability to lift 40-70 pounds., • Work in high locations (not afraid of heights), • Work in inclement weather/conditions (33°ree;F to 102°ree;F), • Assist Technicians with tower cleanings and disinfections (protective equipment is provided)., • Assist Technicians to flush, clean, and treat piping systems using specialized equipment and chemicals., • Connect hoses to simple systems., • Run make-up & drain and disconnect them., • Rolling of hoses., • Load and unload work van., • Other related tasks as directed by Technician or Field Manager., • Submit to pre-employment background check., • Ability to pass a physical Qualifications: • Valid driver’s license preferred but not required., • Mus have work boots and pants., • SST card preferred but not required., • OSHA certification preferred but not required., • Exhibits a "can-do" attitude in all facets of the business., • Understands the value of reputation., • Previous experience in pipe fitting and working on construction sites is preferred. Relevant experience in similar manual labor positions is welcome. Benefits Benefits: • As a seasonal employee you will accrue sick time. If you join the team as a full-time permanent employee, we will discuss all of the great benefits that Tower Water has to offer., • Pay rate $22.00 per hour, with a guarantee of 25 hours per week. We guarantee a minimum of 25 hours per week as long as you do not call out and not during holiday weeks, or closings due to a state of emergency., • Overtime after 40 hours, Saturdays are paid at overtime rate, Sundays are paid at double-time. Bonus for completing the season properly. • $1,000 Bonus paid upon completion of the full term of the assignment as stated above with perfect attendance, performing all instructed job duties safely and efficiently, being a supportive member of the team. and completing the assignment with zero injuries. Perfect attendance is considered reporting to work on time, every day, prepared and ready for work. There will be a one-time allowance for a single lateness up to 30 minutes, and a one-time allowance for a single lateness up to 10 minutes. Failure to meet these criteria will void the bonus., • Uniform shirt, tools, & safety gear are provided. You will be responsible for dark colored work pants (no jeans) and hard-toe work boots., • Gain industry training and experience. Tower Water is an Equal Opportunity Employer. Tower Water does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionResidential HVAC Service Technician We invite full-time Residential HVAC Service Technicians to join our team in Union, NJ. Those with no HVAC experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-14 weeks. Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. You take pride in doing the job right, especially when nobody's checking. You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know Strong residential HVAC knowledge — you've been running service calls and diagnosing real problems in real homes. Solid understanding of safety regulations and local codes. Valid driver's license with a clean driving record. Fluent in English. What Will You Do? You'll run residential HVAC service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: Diagnosing and resolving HVAC issues across a range of equipment — furnaces, heat pumps, mini-splits, central A/C, boilers. Spotting potential problems early to prevent callbacks and breakdowns. Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team!

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Helper to join our team. The HVAC Helper will support the HVAC department by preforming Plumbing and HVAC work and assisting Plumbing / HVAC mechanics with daily tasks and projects Essential Functions • Assist with the Installation, repair and maintenance of all plumbing systems including but not limited to drainage, waste, vent, gas and flue piping, fixtures, faucets, tub & shower valves and water heaters., • Assist with the Installation, repair and maintenance of all HVAC systems including but not limited to hydronic boilers, steam boilers, hot air furnaces, air conditioning systems, piping, controls and ductwork., • Keep the mechanics vehicle organized, stocked with material and clean., • Review and complete assigned training curriculum., • Have hand tools as required by the company., • Wear PPE as established by the company guidelines, • Any other tasks as assigned managerEducation, Qualities & Skills required, • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR Axof5ZUwGq

Job DescriptionDescription: Description Controlled Combustion is the leading commercial heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, commercial buildings, and more. With over 150 employees, our team is as diverse as the services we offer. We are looking for a Junior Commercial Heating Technician / Burner Helper to join our growing field service team. This position is a strong fit for someone with mechanical ability and some hands-on experience in HVAC, heating, electrical work, facilities maintenance, plumbing, pipefitting, auto/diesel repair, or another related mechanical trade. It is designed for someone who wants to build a long-term career in commercial heating service. This is not a senior technician position. It is a hands-on field role for someone who is dependable, eager to learn, comfortable using tools, and willing to work alongside experienced technicians while developing the skills needed to service commercial gas and oil burners, boilers, controls, and related electrical systems. Qualified candidates may have the opportunity for Local Union 638-B enrollment as they develop in the role. Responsibilities • Assist senior technicians with the service, maintenance, troubleshooting, and repair of commercial gas and oil burners., • Learn how to work on atmospheric boilers, condensing boilers, Scotch marine fire tube boilers, and related commercial heating equipment., • Assist with diagnosing combustion issues, open limits, electrical problems, control issues, and related service calls., • Use hand tools, electrical meters, combustion gas analyzers, and other field service equipment under supervision., • Help maintain clean, organized work areas, vehicles, tools, and equipment., • Follow instructions carefully and ask questions when additional guidance is needed., • Communicate professionally with customers, dispatch, supervisors, and other technicians., • Complete service reports and job documentation accurately and on time., • Follow company safety procedures, customer site requirements, and industry best practices., • Participate in overtime, weekend work, and after-hours/on-call opportunities as training and qualifications progress. Benefits • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance, • Overtime opportunities, • Stable year-round commercial work, • Opportunity for advancement, • Hands-on training and long-term career growth, • Potential opportunity for Local Union 638-B enrollment for qualified candidates Schedule • Monday to Friday, • Overtime, • Weekends as needed, • After-hours/on-call opportunities as training and qualifications progress Supplemental Pay • Bonus opportunities, • Double time pay, • Overtime pay, • On-call premium pay, when applicable Experience Preferred • HVAC, heating, electrical, facilities maintenance, plumbing, pipefitting, auto/diesel, or related mechanical trade experience: 1 year preferred, • Commercial heating or boiler experience preferred, but not required, • Basic electrical troubleshooting experience preferred, • Experience using hand tools required, • Experience using meters or diagnostic tools is a plus, • Trade school or technical school background is a plus License / Certification • Driver’s License preferred Work Location • In person / field service throughout the New York Metropolitan areaRequirements: Qualifications / Skills • Strong mechanical aptitude and willingness to learn., • Interest in building a long-term career in commercial heating service., • Comfortable working with hand tools and learning field service equipment., • Basic understanding of electrical troubleshooting preferred., • Ability to follow instructions carefully and work under the direction of experienced technicians., • Reliable, punctual, dependable, and willing to work in the field., • Strong work ethic and professional attitude., • Good communication skills with customers, supervisors, dispatch, and other technicians., • Ability to complete basic service documentation accurately., • Willingness to learn about gas and oil burners, boilers, combustion theory, controls, and electrical troubleshooting., • Willingness to work overtime, weekends, and participate in after-hours/on-call opportunities as experience grows. Minimum Education and Work Experience • High school diploma or equivalent preferred., • At least 1 year of hands-on experience in HVAC, heating, electrical, facilities maintenance, plumbing, pipefitting, auto/diesel, or another mechanical trade preferred., • Trade school, technical school, or related coursework is a plus., • Prior commercial heating, burner, boiler, or field service experience is a plus, but not required.

Job Description Job description: Chill Factor HVAC – New York City, NY Pay: $30–$40 per hour, based on experience, OT available, plus performance bonuses Job Type: Full-time Work Location: On the road throughout all five NYC boroughs About the Position Chill Factor HVAC is hiring a highly experienced Senior HVAC Service Technician to handle residential and commercial service calls throughout New York City. This position is focused heavily on preventive maintenance, system diagnostics, troubleshooting, and repair, particularly for: • Ductless mini-split and multi-split air-conditioning systems, • Central air-conditioning systems, • Heat pumps, • VRF and VRV systems, • Rooftop units, • Boilers and furnaces, • Commercial and residential HVAC equipment This is not an entry-level or helper position. We are looking for an independent technician who can arrive at a job, assess the complete system, identify the actual cause of the problem, and provide the correct long-term solution. The right candidate is a strong problem-solver who understands that replacing a part is not the same as diagnosing a system. Key Responsibilities • Perform preventive maintenance, inspections, diagnostics, troubleshooting, repairs, and installations on residential and commercial HVAC systems, • Diagnose ductless mini-split and multi-split systems, including communication errors, refrigerant issues, sensor failures, drainage problems, electrical faults, control-board issues, and performance deficiencies, • Troubleshoot systems independently using gauges, meters, digital diagnostic tools, manufacturer error codes, technical manuals, and service documentation, • Identify the root cause of equipment failures rather than relying on temporary fixes or unnecessary part replacement, • Inspect and maintain indoor and outdoor units, condensers, evaporator coils, compressors, motors, fans, pumps, control boards, thermostats, valves, sensors, electrical components, and refrigerant circuits, • Perform routine maintenance, including coil cleaning, filter replacement, drain-line service, electrical testing, refrigerant checks, airflow evaluations, and system-performance testing, • Diagnose heating and cooling issues involving central A/C systems, heat pumps, boilers, furnaces, rooftop systems, and related HVAC equipment, • Identify system inefficiencies and recommend practical repair, maintenance, or replacement solutions, • Repair or replace defective components while following manufacturer specifications and industry best practices, • Verify that systems are operating safely, efficiently, and according to design, • Support HVAC installations, equipment replacement, system design, piping layout, controls, and startup procedures, • Maintain compliance with NYC building requirements, safety regulations, and applicable mechanical and refrigeration standards, • Complete accurate service reports documenting findings, diagnostics, repairs, recommendations, and completed work, • Communicate clearly and professionally with homeowners, building staff, property managers, commercial clients, and company management, • Keep work areas clean, organized, and protected throughout every service call Required Qualifications • Minimum of five years of hands-on HVAC service and repair experience, • Strong experience maintaining, diagnosing, and troubleshooting ductless mini-split and multi-split air-conditioning systems, • Proven ability to work independently without requiring continuous supervision, • Advanced troubleshooting skills across electrical, mechanical, airflow, refrigeration, drainage, and control systems, • EPA Section 608 certification, • Relevant FDNY Certificate of Fitness or NYC refrigeration credentials, as applicable, • Experience working with both residential and commercial HVAC equipment, • Ability to read wiring diagrams, technical manuals, service documentation, and manufacturer fault codes, • Strong understanding of the refrigeration cycle and proper refrigerant charging and recovery procedures, • Professional appearance and communication skills, • Dependable, organized, safety-conscious, and comfortable traveling throughout all five NYC boroughs, • Ability to make sound decisions and find solutions under pressure Preferred Qualifications • Valid New York State driver’s license, • Experience with commercial rooftop units and larger HVAC systems, • Experience with VRF and VRV systems, • Familiarity with inverter-driven equipment, modern heat pumps, and high-efficiency HVAC technology, • Experience working in apartment buildings, private residences, retail spaces, offices, and commercial properties, • Manufacturer-specific training or certifications What We Offer • Annual compensation of $60,000–$80,000, based on experience and demonstrated technical ability, • Performance-based bonuses, • Full-time, year-round work, • Consistent service and maintenance opportunities with no seasonal layoffs, • Modern tools, diagnostic equipment, and professional support, • A respectful and experienced team, • Clean, professionally managed projects, • Opportunities for advancement as the company continues to grow About Chill Factor HVAC Chill Factor HVAC provides installation, preventive maintenance, diagnostics, troubleshooting, and repair services for residential and commercial HVAC systems throughout New York City’s five boroughs. Our reputation is based on accurate diagnostics, clean work, honest recommendations, and repairs performed correctly the first time. We are looking for a senior technician who takes ownership of every service call and represents the company professionally in front of our clients. How to Apply Submit your application together with an updated résumé outlining your HVAC service, maintenance, diagnostics, troubleshooting, and installation experience. Qualified candidates will be contacted promptly. We are actively hiring. Professional references are required and will be contacted as part of the hiring process. Chill Factor HVAC is an equal opportunity employer. All qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristic. Benefits: • Company truck, • Fuel card, • Tools provided Work Location: On the road

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber Helper to join our team. The Plumber Helper will support the Plumbing department by performing Plumbing work and assist Plumber on daily tasks and projects. Essential Functions • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports., • Cut or drill holes in walls or floors to accommodate the passage of pipes., • Assist pipe fitters in the layout, assembly, and installation of piping for air, gas and water systems., • Cut pipe and lift up to fitters., • Fit or assist in fitting valves, couplings, or assemblies to tanks, pumps, or systems using hand tools., • Mount brackets and hangers on walls and ceilings to hold pipes, and set sleeves or inserts to provide support for pipes., • Excavate and grade ditches, and lay and join pipe for water and sewer service, • Disassemble and remove damaged or worn pipe., • Wear PPE as established by the company guidelines, • Any other tasks as assigned manager Required Education and Experience • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR o9jrOFjo5u

Job Description Full-Time Positions Available: • Sheet Metal Duct Shop Fabricator, • Sheet Metal Duct Installer (Tin Knocker) and or HELPER, • HVAC Service Technician/Mechanic, • Delivery Driver, • Bookkeeper (Office Worker) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Shop Fabricator: We have a full operating sheet metal fabrication shop. We fabricate duct work for commercial and residential buildings. Responsibilities • Operate Plasma to cut 5'x10' sheets of metal., • Operate machines to cut, shape, and form sheet metal including roller, rotodie, shear, punch press, hand brake, weighting machine, plasma cutters, and more., • Drill and punch holes in metal, for electrical components, screws, bolts, or rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Trim, file, grind, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Finish parts, using hacksaws, and hand, rotary, or squaring shears., • Develop and lay out patterns that use materials most efficiently., • Insulate ductwork using glue & pinspotter., • Maintain equipment, making repairs and modifications when necessary. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Installer (Tin knockers) Position: Responsibilities: • · Installation of a variety of Commercial HVAC equipment, • · Installation of a variety of HVAC DUCTWORK (round, spiral, rectangular), • · Sheet metal Fabrication in the field as necessary., • · Responsible for sheet metal measurements, sketching and ordering ductwork. Requirements: • · Reading and interpreting blueprints, • · To have a basic understanding of central air conditioning systems, • · Should be reliable, self-motivated, have the ability and knowledge to read specifications and Shop Drawings., • · Should possess good communication skills, • · Must be able to maintain a safe work area, • · Should also have a flexible attitude and should be willing to travel at any given point of time --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- HVAC Service Mechanic Position: Responsibilities: · Install new heating, ventilation, and air conditioning systems · Inspect and perform equipment repairs and replacements · Perform routine preventative maintenance · Respond to emergency maintenance requests · Adhere to all safety policies and procedures · Responsible for the installation of large mini-split systems, including refrigeration piping, pipe insulation, and control wiring · Perform start-up of newly installed HVAC systems · Perform Service repairs and troubleshooting diagnostics to existing HVAC systems · Perform in the field using related experience and knowledge of codes and specifications. Qualifications: · Previous experience in HVAC or other related fields (minimum of 5 years prior experience) · Familiarity with HVAC wiring diagrams · Ability to handle physical workload · Run Refrigeration piping · Strong problem solving and critical thinking skills · Qualified individuals most possess a full-range of mechanical knowledge · Ability to Navigate NYC Subway Systems Delivery Driver: • Looking for a driver to deliver Duct work and material to job sites daily., • When not making deliveries, driver will help fabricate duct work Education · Technical trade school diploma and training certificate is a plus · Minimum of 5 years’ experience in a commercial HVAC application and Ductwork installation • Helpers Minimum of 2 years' experience in commercial and or Residential · OSHA 30 hours \nCompany Description We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy. We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy.

Job Description COMPENSATION: $22.00/hr to $25.00/hr. This position comes with an apartment in Lower East Side, New York depending on availability. WHO WE ARE: Stanton Norfolk Inc. is a division of Asian Americans for Equality, Inc. (AAFE) that manages the day-to-day operations of over 800 units of affordable housing across nearly 50 multifamily properties serving over 1,100 individuals and families in Manhattan and Queens neighborhoods, including Chinatown/Lower East Side, Flushing, and the Far Rockaways. Currently, Stanton Norfolk’s portfolio is comprised of full tax credit / affordable properties, as well as commercial spaces as part of mixed-use buildings. We pride ourselves in providing a full breadth of management services to provide quality, safe, and affordable housing; maintenance; financial reporting; and resident relations. Asian Americans for Equality (AAFE) is a 501 (c) (3) non-profit organization based in New York City. Founded in 1974 in Manhattan’s Chinatown to advocate for equal rights, AAFE has transformed in the past four decades to become one of the city’s leading housing, social service and community development organizations. AAFE advances racial, social and economic justice for Asian Americans and other systematically disadvantaged communities, guided by our experiences as Asian Americans and our commitment to civil rights. AAFE is nationally recognized as an innovative affordable housing developer and property manager; we have created and preserved more than 1,000 affordable rental units in Manhattan and Queens and provided over $400 million in mortgage financing for first-time homebuyers. Through our affiliate, Renaissance Economic Development Corporation, AAFE supports immigrant entrepreneurs, offering low-interest loans and training programs. From neighborhood offices in Chinatown and the Lower East Side (Manhattan) and Flushing and Jackson Heights (Queens) we provide an array of multilingual counseling and educational programs in support of low-income tenants, seniors and immigrant youth. AAFE strives for a more equitable city, through research, advocacy and grassroots community organizing. Summary: The Maintenance Helper will handle and perform a variety of non-technical, non-licensed mechanical, electrical maintenance, HVAC, painting, carpentry, custodial, plumbing, general repair, and other handyperson tasks related to overall building maintenance for a new mixed-use residential and commercial building in Lower Manhattan, NY. The Maintenance Helper will report to, and work under the direct supervision of the Property Manager. Responsibilities: • Performs general repairs and services in all maintenance related disciplines assigned by the Facility Manager. • Performs preventative maintenance for plumbing, electrical, and heating systems in residential units as needed. • Performs minor repairs including carpentry, painting, surface touch-ups, tiling, and flooring., • Identifies and reports any deficiencies in residential units or the building., • Changes locks, re-keys, and makes key copies as directed., • Reports all accidents and any illegal activities to management in a timely way., • Supervises any third-party contractors and utility companies as needed., • Properly documents and details completed work orders., • Completes any other tasks as assigned by the Property Coordinator., • Maintains a working relationship with tenants at all times., • Performs work with respect and professional courtesy. Qualifications: • Minimum of 5 years of experience in general maintenance, caretaking, mechanical, electrical and/or equipment and building repairs., • Attention to detail., • Positive attitude and good communication skills, both verbal and written., • Availability to work in shifts and with flexible schedules (e.g. weekends and evenings)., • Bilingual in English/Chinese is preferred., • Building maintenance certifications (i.e. Sprinkler Certificate of Fitness) or other training, is preferred. Physical Requirements: • Required to walk from floor to floor and may be required to walk outside between buildings in varying outdoor weather conditions. • Ability to move furniture; reach, lift, and carry heavy equipment, • Required to stand, bend, squat, and regularly lift up to 50 pounds through course of shift. Schedule Requirements: • Must be flexible with schedule change every quarter How we work: We believe that the people and the communities that we have the privilege to serve, deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. Stanton Norfolk employees are accountable, pragmatic, innovative and collaborative with a core strength of community service and development. We are strategic thinkers who are committed to racial equality and treating each other, and the communities we serve, with respect and dignity. This philosophy expands to the way we manage our work and the way we put our best foot forward. All employees are expected to meet the following requirements and behaviors: • Support efforts that ensure a safe and healthy work environment., • Understand and embrace the value in collaborating with people of different cultures, races, genders, ethnicities, beliefs, experiences and ideas., • An understanding of the concepts of institutional and structural racism and bias and their impact on underserved and underrepresented communities., • Maintain a positive, helpful attitude., • Enjoy your time at work! Powered by JazzHR Q8QWUVAusf

Job DescriptionDescription: Controlled Combustion is the leading commercial heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, commercial buildings, and more. With over 150 employees, our team is as diverse as the services we offer. We are looking for a Tank Installation and Repair Helper to join our growing field team. This is a hands-on field position for someone who is dependable, safety-conscious, mechanically inclined, and willing to assist with tank installation, tank repair, and related field work at customer locations. The right candidate should be comfortable working with tools, following instructions, maintaining safe work areas, and supporting experienced field personnel with daily job tasks. This position requires current G-60, F-60, and OSHA 30 certifications. A valid driver’s license and welding certification are strongly preferred. Responsibilities • Assist with tank installation, tank repair, and related field service work at customer locations., • Help prepare, organise, and maintain tools, materials, equipment, and work areas., • Assist with loading, unloading, carrying, setting up, and cleaning job-related equipment and materials., • Support experienced field personnel with measuring, fitting, preparation, clean-up, and general job-site tasks., • Assist with fire watch, safety support, and related job-site responsibilities as required., • Use hand tools and field equipment safely and properly., • Follow instructions from supervisors, mechanics, technicians, and other experienced field personnel., • Maintain clean, organised, and safe work areas., • Follow company safety procedures, customer site requirements, and industry best practices., • Communicate professionally with supervisors, co-workers, customers, and building personnel., • Report safety concerns, equipment issues, or job-site concerns to the appropriate supervisor., • Participate in overtime, weekend work, and schedule changes as needed. Benefits • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Room for growth, • Overtime opportunities, • Stable year-round work, • Opportunity to gain hands-on field experience with an established commercial heating company Schedule • 8-hour shift, • Monday to Friday, • Overtime, • Weekends as needed Experience Preferred • Tank installation, tank repair, field helper, trade helper, mechanical helper, construction, maintenance, welding, HVAC, plumbing, pipefitting, or related trade experience preferred., • Experience working safely on commercial job sites preferred., • Experience using hand tools and field equipment preferred., • Welding experience is a plus. License / Certification • G-60 Certificate required., • F-60 Certificate required., • OSHA 30 required., • Driver’s License strongly preferred., • Welding certification strongly preferred. Work Location • In person / field work at customer locationsRequirements: Qualifications / Skills • Current G-60, F-60, and OSHA 30 certifications., • Strong work ethic and willingness to perform hands-on field work., • Mechanical ability and comfort working with tools and equipment., • Interest in tank installation, tank repair, welding, and related field work., • Ability to follow instructions carefully and work under the direction of experienced field personnel., • Safety-conscious and able to follow job-site safety requirements., • Reliable, punctual, dependable, and professional., • Able to work as part of a team in a field environment., • Comfortable with physical work, including lifting, carrying, setting up, cleaning, and assisting with equipment and materials., • Strong attention to safety, detail, and proper work procedures., • Good communication skills with supervisors, co-workers, customers, and building personnel., • Willingness to work overtime, weekends, and adjusted schedules as needed. Minimum Education and Work Experience • High school diploma or equivalent preferred., • Prior field, construction, mechanical, maintenance, welding, HVAC, plumbing, pipefitting, tank work, or related trade experience preferred., • Welding certification or welding experience is strongly preferred.

JLL is seeking a skilled Engineering Helper for Harborside Plaza 2 & 3 in Jersey City, NJ.