Technician jobs in AberdeenCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,170, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the Scotland: Aberdeen Edinburgh Kilmarnock A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: Either: • NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or • 5+ years’ experience as a Vehicle Technician/Mechanic and • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the Scotland: Aberdeen Edinburgh Kilmarnock A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: Either: • NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or • 5+ years’ experience as a Vehicle Technician/Mechanic and • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,170, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

\n We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. \n This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. \n As a Workshop Service Engineer for Nationwide Platforms you will work within... \n \n ZIPC1_UKTJ

Speedy are the UK & Irelands leading hire provider with the widest range of tools, specialist hire equipment, plant and support services everything for every job! \n Job Title - Test and Run Technician \n Location - Aberdeen \n Working Hours - Monday to Friday - 07:30 - 17:00 - 42 hours per week \n Salary £29,572 per annum pro rata \n The role of a Test and Run Technician is a busy and productive role in the depot, ... \n \n ZIPC1_UKTJ

Mobile Vehicle Technician \n Franchised Mobile Service Team - Aberdeen Area \n To £44,000 OTE \n Our client, a highly regarded main dealer is seeking a motivated Mobile Vehicle Technician to join their busy Mobile Service Team. They are a 24/7 operation so can offer hours to suit you. \n For the right candidate this position will offer: \n Exceptional career progression with fantastic earnings potential \n Start and f... \n \n \n ZIPC1_UKTJ

CAD Technician (Oil and Gas / Renewables) £45,000 - £50,000 + Training + 25 Days + Bank Holidays + Private Medical + Benefits Aberdeen Are you a CAD Technician with experience producing fabrication or engineering drawings, looking to join a well-established fabrication specialist working across the offshore energy, renewables, and marine sectors? Do you enjoy working closely with Production and Estimating teams, reviewing drawings, producing fabrication-ready information, and ensuring design data is controlled and issued accurately within a fast-paced engineering environment? The company has been delivering high-quality fabrication and welding solutions to the oil and gas industry for over 40 years. Specialising in fabricated steel and pipework, the company supports offshore energy, renewables, marine and steel industry clients with services ranging from onshore fabrication to offshore mobilisation and installation. This is an excellent opportunity for a detail-focused CAD Technician who enjoys working collaboratively with production, quality and estimating teams to ensure accurate design information and efficient fabrication processes. The Role: Produce CAD drawings and burning table profile templates for fabrication projects Control client-issued drawings and maintain accurate revision status and change control Work closely with the Production Manager and estimating team to gather information required for quotes Liaise with suppliers, clients and third-party design partners regarding drawing inputs and revisions Assist production teams with material take-offs and fabrication information Produce working drawings from company survey reports, sketches, and dimensional dataThe Person: Proficient in 2D and 3D AutoCAD Knowledge of fabrication processesJob Reference: BBBH26697 Key words: CAD Technician, CAD Designer, Design Technician, AutoCAD, 2D AutoCAD, 3D AutoCAD, Engineering Drawings, Fabrication Drawings, Structural Steel, Pipework, Pipe Fabrication, Steel Fabrication, Welding Fabrication, Offshore Fabrication, Oil and Gas, Aberdeen, Aberdeenshire We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website

Mechanical Fitter / Assembler£34,000 - £36,000 + Training + Overtime + Progression + Days-Based + Excellent Company BenefitsAberdeen - Commutable from Westhill, Inverurie, Balmedie, Stonehaven, Ellon and Surrounding AreasAre you a Mechanical Fitter or an Assembly Technician, and are you looking for a day-based role where you can further your career with excellent training?This is an excellent opportunity to join a secure company that is renowned for investing in its staff and offers plenty of chances to increase your earnings through overtime.The company is a manufacturer supplying various industries and has invested significantly in its growth recently. They ensure all engineers are industry experts through training and development.In this workshop-based role, you will manufacture a broad range of products and sub-assemblies by assembling and fitting mechanical components, and by testing and fault-finding to resolve issues.This role would suit a Mechanical Fitter from a manufacturing/production background, looking to join a growing company in a secure role with specialist training, progression, and plenty of overtime.The Role: \n\n • Assembly and fitting of mechanical components\n, • Ongoing training + Company Benefits\n, • 7:30am - 4:00pm // Mon - Fri (Days)\n\n The Person: \n\n • Mechanical Fitter / Assembly Technician\n, • Manufacturing / Production background\n, • NVQ Level 3\n, • Commutable to Aberdeen\n\n Mechanical, Mechanic, Mechanically Biased, Maintenance, Mechanical Fitter, Assembly Technician, Assembly Fitter, Fault Finding, Manufacturing, Production, Fitting, Testing, Aberdeen, Westhill, Inverurie, Balmedie, Stonehaven, Ellon, ScotlandReference Number: BBBH275213To apply for this role or to be considered for further roles, please click "Apply Now" or contact Josh Cooper at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Lab Technician / Materials Tester (Construction) £12.76ph - £14ph DOE + Overtime + Training 6 Month Initial Contract 40 Hours Per Week (OT Available) AberdeenAre you looking for a hands-on role within construction materials testing, with full training provided and regular overtime available to boost your earnings? This is a great opportunity to join a growing construction materials testing team on an initial 6 month contract, working across both laboratory and field-based testing. The role will involve testing construction materials such as asphalt, aggregates and other site materials, ensuring work is carried out to the required standards. You will be working both on-site and in the lab, with full training provided, so this could suit someone with some construction, site, lab, testing or practical hands-on experience who is looking to develop further. There is regular overtime available, paid at 1.5x for additional weekday hours and 2x at weekends, offering a good opportunity to increase your weekly earnings.The Role: Lab Technician / Materials Tester Testing construction materials such as asphalt and aggregates Field and laboratory-based work Full training provided Overtime available at enhanced rates (1.5x & 2x)The Person: Practical, hands-on background Experience in construction, materials testing, site work, lab work or similar would be beneficial Willing to work in both field and lab environments * Looking for training and development \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Mechanical / Hydraulic Workshop Technician \n Aberdeen | £35,000 - £40,000 DOE | Offshore & International Travel | Permanent \n Looking for a hands-on role with a growing engineering business delivering specialist equipment to major global energy projects? \n We're seeking a Mechanical / Hydraulic Workshop Technician to join an innovative Aberdeen-based engineering company. You'll be involved in the assembly, testing, maintenance and mobilisation of specialist mechanical and hydraulic equipment, with opportunities to travel offshore and internationally. \n What we're looking for: Strong mechanical and hydraulic experience Practical fault-finding and problem-solving skills Ability to read engineering drawings and hydraulic schematics Flexible approach to occasional offshore and overseas travel Team player with excellent communication skills \n What's on offer: Work on industry-leading specialist equipment International travel and offshore opportunities Ongoing training and career development Supportive and forward-thinking team environment \n If you're looking for a varied workshop role with genuine progression opportunities, we'd love to hear from you.

Electrical Technician (Oil & Gas / Subsea)£13.00 - £19.00 p/h + Private Healthcare (Bupa) + Generous Holiday + Flexitime + Life Insurance Aberdeen - Days Based Shift (early finish Friday)Are you a Electrical Technician or Control Panel Wirer looking to join a specialist manufacturer within the Oil & Gas / Subsea sector, offering technical training and clear progression?Due to company growth, they now have a brand new position available for an Electrical Technician to join their team, on a days based role, offering great benefits and earning potential.This longstanding company have a huge reputation for their quality of products and services; as such, they are looking to build on this, with a long term plan in place for continued and sustained growth. They are also well-known for their staff progression, training and retention.The ideal candidate will be immediately available, with the ability to read electrical drawings, good electrical soldering capabilities and technical electrical wiring skills.This is a fantastic opportunity to join a leading market specialist, offering security, career progression, healthy work life balance, with great earning potential.The Role: Electrical Technician Soldering & Wiring Understanding of electrical drawings Days based role, Monday - Friday (early finish Friday)The Person: Electrical Technician / Control Panel Wirer Ability to read electrical drawings *Wants technical progression & trainingTo apply for this role or for to be considered for further roles, please click "Apply Now" or contact Troy Earl at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Electrical Engineer (CompEx / Manufacturing) \n £22 - £25 Per Hour + Training + Progression + Life Insurance + Free Parking + Early Friday Finish \n Aberdeen \n Are you a Time Served Electrician or Electrical Engineer with experience working in hazardous areas, looking to join a specialist manufacturer providing the chance to work on industry-leading equipment? \n On offer is the opportunity to join a well-established specialist manufacturer of subsea equipment, supplying innovative solutions to safety-critical and hazardous-area industries. With continued growth and a strong project pipeline, this is an ideal time to join a stable business offering long-term career development. \n You will be responsible for overseeing electrical installations, producing electrical certification and documentation, supporting hazardous area equipment builds, and mentoring workshop staff to ensure work is completed safely and to the highest standard. \n This role would suit a Time Served Electrician or Electrical Engineer with a strong electrical installation or maintenance background, who is EX01-EX04 qualified. \n \n The Role \n\n • Provide electrical support to workshop staff, ensuring work is completed efficiently and to a high standard\n, • Oversee electrical equipment installation within a manufacturing environment\n, • Produce electrical documentation and certification for units under build\n, • Ensure compliance with hazardous area installation requirements (ATEX / IECEx)\n, • Assist in the preparation and execution of FAT (Factory Acceptance Testing) procedures\n, • Support the production of ATEX and associated certification documentation\n, • Supervise and mentor team members and contractors when required\n, • Monday to Thursday, 7:30 - 4, 3:30 finish on a Friday\n\n \n The Person \n\n • Time-served Electrician or qualified Electrical Engineer\n, • Knowledge of ATEX and IECEx standards\n, • CompEx EX01-EX04 qualified\n\n \n \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n \n Reference Number: BBBH26572 \n \n Keywords: Electrical Engineer, Electrician, Time Served Electrician, Industrial Electrician, Manufacturing Electrician, Workshop Electrician, Electrical Technician, Electrical Installation, Electrical Maintenance, Electrical Assembly, Electrical Manufacturing, Electrical Systems, Industrial Electrical, Electrical Engineering, Hazardous Areas, Hazardous Area Equipment, Hazardous Area Installation, Hazardous Area Compliance, ATEX, IECEx, CompEx, CompEx EX01-04, EX01, EX02, EX03, EX04, Electrical Certification, Electrical Documentation, Technical Documentation, Electrical Drawings, Electrical Schematics, Electrical Testing, Inspection & Testing, Factory Acceptance Test, FAT, FAT Procedures, Commissioning, Electrical Commissioning, Control Panels, Panel Wiring, Instrumentation, Process Control, Industrial Equipment, Manufacturing, OEM, Oil & Gas, Petrochemical, Process Industry, Mechanical & Electrical, M&E, Workshop Engineering, Engineering Support, Technical Support, Team Leadership, Supervising Engineers, Mentoring, Contractor Management, Quality Assurance, Health & Safety, Electrical Regulations, Compliance, Engineering Standards, Problem Solving, Industrial Engineering, Production Engineering, Installation Engineer, Service Engineer, Maintenance Engineer, Electrical Fault Finding, Continuous Improvement, Aberdeen, Dyce \n \n We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. \n \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n \n \n \n \n

Quality & Document Control Technician \n Our client, a rapidly growing engineering and manufacturing business serving the energy sector, is seeking a Quality & Document Control Technician to support quality and project documentation activities within a busy operations environment. \n Key Responsibilities: \n\n • Maintain and control quality and project documentation, ensuring accuracy, compliance, and effective version control.\n, • Support quality processes by managing inspection records, documentation packs, and assisting with shop floor quality activities when required.\n, • Work closely with internal teams to compile customer documentation, support audits, and drive improvements in document management processes.\n\n What We're Looking For: \n\n • Experience in document control, quality administration, or a similar manufacturing/engineering role.\n, • Strong organisational skills with excellent attention to detail.\n, • Good IT skills and familiarity with quality systems such as ISO 9001 would be advantageous.\n, • Lead Auditor would be highly desirable, but not essential! \n\n This is a fantastic opportunity for an organised and proactive individual looking to develop their career within a quality-focused manufacturing environment.

Technical Manager (Quarry Laboratory) \n Aberdeen, commutable from: Newburgh, Inverurie, Kintore, Torphins, Stonehaven, Banchory & all surrounding areas \n Extremely Competitive Salary \n Are you a Technical Manager or Laboratory Manager with a background in asphalt, concrete or aggregates, looking to take ownership of a key technical function within a well-established and growing organisation? \n This is an excellent opportunity to join a respected business where you'll lead laboratory operations, drive quality standards, and provide technical expertise across multiple sites. \n Working closely with operational and commercial teams, you'll play a vital role in ensuring products meet the highest industry standards while supporting continuous improvement and customer satisfaction. \n The company are a market leader across multiple industry sectors and have built a strong reputation based on high quality of products as well as their commitment to the training & development of their staff. \n This position would suit a Technical or Laboratory Manager from a quarry/aggregates background, looking for an autonomous role where you can put your own stamp on operations. \n The Role: \n\n • Managing the dayto-day operation of the technical laboratory\n, • Overseeing testing of asphalt, concrete and aggregate materials to industry standards\n, • Leading, mentoring and developing laboratory and technical staff\n\n The Candidate: \n\n • Technical Manager, Laboratory Manager, Senior Technician or similar background\n, • Experience within asphalt, concrete, aggregates, quarrying or construction materials\n, • Full UK driving licence\n\n Reference Number: BBBH277310To apply for this role or to be considered for further roles, please click "Apply Now" or contact Patrick Simper at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

\n \n \n \n e're looking for a Building Civils Design / Senior Civil Engineering Technician to join our Kier Design team, based in either Liverpool (Speke) or Norwich (Wymondham). \n This is an opportunity to be part of a well-established and supportive team, working on the design of a diverse range of building projects and site redevelopments. Projects span a variety of sectors, including education, retail, blue light, defence, conservation and commercial developments, offering plenty of variety and challenge. \n With core teams in Liverpool and Wymondham, you'll also benefit from being part of Kier Design's wider 750-strong design practice, giving you exposure to large, high-profile building developments and the chance to collaborate with experienced professionals across the business. \n Location: Liverpool (Speke) or Norwich (Wymondham) - travel to the office required with some remote working Hours: Permanent Fulltime 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us We are unable to offer certificates of sponsorship to any candidates in this role. \n What will you be responsible for? \n As a Building Civils Design / Senior Civil Engineering Technician, you'll be working within the Civil and Structural Engineering team, supporting them in delivering high-quality civil engineering and drainage design solutions. Your day to day will include: \n \n • Producing and checking coordinated civil engineering and below ground drainage drawings, design models, schedules and specifications within a quality assurance environment\n, • Checking and coordinating civil engineering and drainage design information with other technical disciplines\n, • Detailing flexible and rigid pavement designs for roads, car parks and hard standings\n, • Preparing material and workmanship specifications for civil engineering, drainage and building elements\n, • Occasionally visiting sites to carry out surveys and inspections, and attending meetings with clients and consultants\n \n What are we looking for? \n This Building Civils Design / Senior Civil Engineering Technician role would suit someone who: \n \n • Holds a qualification in Civil Engineering, Building, Construction or Structural Engineering (Degree, HNC, BTEC or equivalent)\n, • Brings strong experience using tools such as REVIT, Navisworks, AutoCAD and Autodesk Civil 3D to produce high-quality, compliant models and drawings\n, • Has hands-on experience with drainage design software such as Innovyze InfoDrainage (or similar), alongside a solid understanding of drainage and SuDS systems\n, • Is confident reviewing and checking the work of others within a Quality Management System environment\n, • Holds a full UK driving licence, with working knowledge of BIM standards (ISO19650), and a genuine commitment to sustainability and continuous professional development\n \n Rewards and benefits \n We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. \n Diversity and inclusion \n Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. \n We look forward to seeing your application to #joinkier. #LI-MA1\n \n \n \n

Role: Onshore Pre‑Assembly Supervisor – Offshore Wind \n Location: Nigg, Scotland (Logistics Hub – remote location, accommodation provided) \n Rotation: 2 weeks on / 2 weeks off \n Role Type: Permanent / Staff \n Salary: Depending on experience – plus daily allowance \n \n About Vulcain Engineering \n Vulcain Engineering is a global engineering consultancy supporting major energy and infrastructure programmes across the United Kingdom and internationally. We embed our people directly into client projects, providing engineering, construction, safety, and operational expertise across the full project lifecycle. \n As offshore wind development continues to expand, Vulcain Engineering is supporting critical onshore preparation activities that ensure offshore installation works are delivered safely, efficiently, and to the highest quality standards. \n \n The Position: Onshore Pre‑Assembly Supervisor – Offshore Wind \n Vulcain Engineering is recruiting Onshore Pre‑Assembly Supervisors to support offshore wind turbine projects from a dedicated onshore logistics and pre‑assembly hub in Scotland. \n Working at the interface between engineering, quality, and operations, the Pre‑Assembly Supervisor plays a key role in overseeing the preparation and assembly of wind turbine components prior to offshore installation. This role is well suited to experienced engineers or senior technicians with offshore wind experience who are comfortable supervising teams and working with technical documentation and quality processes. \n \n Some of the main responsibilities of the Onshore Pre-Assembly Supervisor will include: \n\n • Supervising pre‑assembly and preparation activities for wind turbine components within an onshore logistics hub\n, • Leading and coordinating teams of technicians involved in turbine pre‑assembly and preparation works\n, • Ensuring all assemblies meet technical specifications, quality standards, and project requirements\n, • Reviewing and working in accordance with technical documentation, drawings, and work instructions\n, • Verifying compliance and identifying defects or non‑conformances prior to offshore mobilisations\n, • Supporting planning and scheduling activities to ensure equipment is prepared in line with vessel and installation timelines\n, • Coordinating closely with logistics, engineering, and quality teams to resolve technical or operational issues\n, • Maintaining a strong focus on safety, quality, and efficiency across all onshore activities\n, • Please note that this role involves working on regulated client sites and is subject to client‑mandated drug and alcohol testing\n\n \n This role offers the opportunity to work at the heart of offshore wind turbine preparation, supporting high‑profile renewable energy projects while benefiting from Vulcain Engineering’s long‑term project pipeline, professional support, and structured rotations. \n Accommodation and travel support are provided due to the remote location of the logistics hub. \n \n Preferred Profile: \n Alongside a commitment to our values of Care & Compassion, Performance, Team Spirit, and Inclusiveness, we are looking for individuals who can bring the following: \n\n • Proven experience within offshore wind, wind turbine installation, or wind turbine pre‑assembly environments\n, • Engineering or senior technician background with experience supervising technical teams\n, • Strong understanding of wind turbine components and assembly processes\n, • Experience working with technical documentation, quality checks, and compliance processes\n, • Ability to plan, coordinate, and supervise work within tight schedules\n, • Comfortable working a 2 weeks on / 2 weeks off rotation\n, • Strong communication skills and a proactive approach to problem solving\n, • Right to work in the United Kingdom\n\n \n Whats in it for you? \n\n • Competitive salary based on experience\n, • Accommodation and travel support for remote onshore locations\n, • Long‑term opportunities across offshore wind projects and the broader Vulcain energy project portfolio\n, • A collaborative, inclusive, and safety‑focused working environment\n, • Commitment to equality, diversity, and inclusion across all roles\n\n \n Vulcain Engineering is committed to creating an inclusive and diverse workforce and welcomes applications from all suitably qualified individuals. \n \n Remuneration & Benefits: \n We offer a competitive salary tailored to your experience and background. Whether you're earlier in your career or bring more senior-level expertise, we encourage you to apply if this role aligns with your skills, or if you're open to discussing other opportunities within this discipline. \n We also offer a benefits package, both standard and enhanced, which is designed to support your wellbeing, development, and financial future, including: \n\n • 25 Days Annual Leave + Bank Holidays, with the ability to swap bank holidays for cultural or religious celebrations\n, • Matched Pension Scheme\n, • Enhanced Maternity, Paternity, Adoption and Neonatal Care Leave \n, • Employee Referral Scheme\n, • Private Medical & Dental Insurance \n, • Electric Vehicle Scheme\n, • Cycle to Work Scheme\n, • Training & Development, including additional qualifications and accreditations relevant to your role\n, • Travel Insurance – for both business and personal travel\n, • Employee Assistance Programme\n\n \n Why join us? \n At Vulcain Engineering, we offer more than just a job, we offer a rewarding career with endless opportunities for growth and development. You'll be part of a talented team of professionals working on exciting and meaningful projects and making a real impact to the nuclear industry. \n We offer a dynamic and collaborative work environment where your talents are valued, and your contributions are recognised. \n Join us in shaping the future of the nuclear industry and driving innovation to new heights. If you are ready to take on new challenges and unlock your full potential, we invite you to apply for our position. \n \n Equal Opportunities: \n Vulcain Engineering UK is an equal opportunities employer. We are committed to creating a diverse and inclusive workplace where everyone is valued and respected. We welcome applications from all individuals, regardless of background, and do not discriminate based on age, gender, disability, ethnicity, religion, sexual orientation, or any other protected characteristic. \n If you require any reasonable adjustments during the recruitment process, please let us know, and we will be happy to accommodate your needs. \n \n We appreciate every application. However, due to the volume we receive, we’re only able to contact candidates who are shortlisted for this role or who may be a strong fit for future opportunities.

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n Think smarter. Move faster. Deliver value. \n \n \n JOB TITLE: POWER AND WATER AND UTILITIES TECHNICIAN. \n \n \n This post is based offshore on the Kittiwake Platform on a 3/4/3/5 rota. \n \n \n KEY RESPONSIBILITIES: \n \n\n • Operates and controls process and utilities facilities in a safe and efficient manner, thereby ensuring that the process plant and systems is optimized to meet environmental and production targets.\n, • Specialist background with experience in Power Generation & Distribution capable of being certified to SAEP level. Carry out adjustments to process facilities under the direction of the Shift Team Leader (STL) & ultimately the Operations Supervisor.\n, • Ensure all Operations equipment for life support and safety systems are maintained and available.\n, • Operate and Manage Power Generation and Distribution Systems.\n, • Act as SAEP or AEP Electrical Person as required in line with Maintenance Team.\n, • Work as part of a team for Power/Utilities systems in line with plans and targets\n, • Identify and report to the Control Room any plant/equipment malfunction. Implement adjustments under the direction of the Control Room with the goal of achieving safe and reliable production.\n, • Work as a key member of the team who are responsible for the safe operation of the plant.\n, • Implement shutdown, design & implement isolation, depressurizing and cleaning of equipment required for maintenance, purging and de-isolating ensuring all work permits have been cleared before bringing production back online.\n, • Carry out front line maintenance such as filter changes, pressure/temperature gauges replacement etc.\n, • Recover plant from any emergency shutdown and minimize loss of production, whilst adhering to operating procedures.\n, • Carry out lab duties, procedures and basic oil and gas analysis.\n, • Complete pre-start-up/operating checks, ensuring all interdependent systems are available. Complete post start-up/operating checks to ensure normal operating conditions.\n, • Carry out site visits and advise on risk assessment controls required for work in your assigned area. Act as counter signatory within permit system as assigned by STL. Take responsibility to monitor work parties in your area and ensure housekeeping standards are being maintained before, during and after work.\n, • Ensure appropriate data is collected, collated and reported in a timely manner and with a high degree of accuracy in support of production optimization and client quality expectations.\n, • Take responsibility for, and ownership of 28-Day / 7-day planning & maintenance activities within the discipline and as delegated by the STL.\n, • Work with discipline Techs to provide effective and efficient plant preparation and re-instatement following maintenance and to ensure only one outage will be required, encompassing all planned activities for the period.\n, • Ensure all documentation, daily logs and trip handovers are to a high standard and accurate.\n, • With the PMC, monitor materials movements on the materials tracker and manifest.\n, • ICP Focal point as tasked by the STL. Make sure verification testing is organized such that the resource and permitry is available at the agreed time.\n, • S/D & Projects Focal point for Operations Area as tasked by STL.\n, • In conjunction with other Operations personnel review any proposed modifications / work packs prior to implementation and feedback as appropriate.\n, • Actively support and liaise with all residential / non-residential contractors / vendors acting as central point of contact, ensuring work carried out by 3rd party personnel conforms to statutory regulations and company standards.\n, • Completion of Competence Management System for role in timely manner.\n, • Understand and comply with the installations safety case, statutory requirements, and safe systems of work.\n, • Ensure contractors and vendors comply with Petrofac / Kittiwake’s safe systems of work and current legislation.\n, • Perform in an emergency role as defined by the Company Emergency Response Procedure Manual and Station Bill.\n, • Ability to lead and work in a team, resolving day-to-day operational issues as they occur.\n, • Ability to manage system issues and liaise with external support teams to bring resolutions.\n, • Ability to manage multiple work scopes, prioritizing and allocating resources as required for the best outcome for the asset.\n, • Ability to review plans for SIMOPS issues and resolve clashes before they manifest at site.\n, • Ability to carry out complex fault-finding on-site equipment, liaising with vendors both remotely and locally to resolve issues.\n\n \n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n\n • Recognized Apprenticeship or Training Scheme, preferable in Electrical Discipline with subsequent multi-skilling in Operations.\n, • Demonstrable experience in Electrical Maintenance and Hydrocarbon Operations support activities, worked in a multi-skilled role.\n, • OND / ONC/ City and Guilds / NVQ Level 3 in suitable trade.\n, • All applicable electrical competence certification to enable work on LV and HV systems.\n, • ISSOW (Proscient Or similar system) training to level 2.\n, • SBT assembly and re-instatement to stage ¾\n, • Compex certification.\n, • Systems literate - experience of computerized management systems e.g., Maximo, Spreadsheets, etc.\n, • Good communication skills (written and verbal) with the ability to share information / knowledge with other personnel.\n\n

Worldwide, energy asset owners choose CB&I Asset Solutions as their asset management partner, confident in our ability to deliver tailored, value driven asset management solutions. \n \n \n Our commitment is simple but powerful: to deliver value to our customers through safe, effective and efficient operations, maintenance, wells and decommissioning solutions, specialising in late life energy assets. \n \n \n We're committed to investing in our people, and to building exceptional teams who deliver. Our people are trusted by our customers to safely operate their energy assets, improve performance and extend asset life through innovative solutions. \n \n \n We support flexible working requests and have adopted a hybrid approach for most of our office-based roles. We ask employees to be present in the office at least three days per week. \n \n \n Think smarter. Move faster. Deliver value. \n \n \n JOB TITLE: INSTRUMENT TECHNICIAN. \n \n The post is based offshore on the BP ETAP a 3/3 rotation. \n \n \n KEY RESPONSIBILITIES: \n \n \n\n • To work in an integrated maintenance team, responsible for planning and execution of instrument work scopes. All work to be carried out in a safe, timely and quality manner to maximise plant and equipment availability, maintain asset integrity and achieve business objectives.\n, • Ensure all work undertaken is safe, and in compliance and accordance with statutory Health and Safety procedures, maintenance manuals, specific work instructions, safe systems of work (Control of Work/Permit to Work) and all recommended safe working practices\n, • Actively participate in thorough pre-job risk assessments for all non-routine activities and confirm that they are accurately reflected in the resultant Permit to Work\n, • Actively participate in any pre-job site inspections/toolbox talks for maintenance activities.\n, • Participation in BOSS and carry out safety tours, as required.\n, • Ensure all required personal protective equipment (PPE) is appropriately used.\n, • Ensure all work party members, especially third-party personnel, fully understand the purpose of, and can use, required emergency response equipment.\n, • Ensure all personnel in proximity of works are fully aware of planned works, associated risks and control/mitigation measures in place.\n, • Ensure compliance with established clean workplace practices.\n, • Ensure all accidents, incidents, near misses and non-conformances are fully reported.\n, • Under direction, undertake routine inspection, servicing and adjustment of equipment.\n, • Under direction, support performance and condition monitoring and assessment.\n, • Review maintenance work orders and ensure all requirements/preparations are fully undertaken before commencement of works.\n, • Ensure any spares requirements are communicated to MDL in line with gate compliance timescales.\n, • Communicate with operations personnel for start-up and shutdown of relevant equipment.\n, • Undertake planned and corrective maintenance on mechanical equipment, ensuring any work carried out is in compliance with company procedures.\n, • Maintain safety critical equipment in accordance with regulations.\n, • Ensure equipment and systems are reinstated to required condition and performance.\n, • Support diagnostic activities and analysis to rectify faults.\n, • Report all work completed in CMMS (Backbone).\n, • Respond to ‘out of hours’ call-outs, as requested.\n, • Provide input on any modifications made to equipment or systems for reporting to onshore discipline engineer to update ‘as-built’ drawing status.\n, • Responsible for management and completion of competency prolife (CPP).\n\n \n \n ESSENTIAL QUALIFICATIONS AND SKILLS: \n \n\n • Recognised trade qualification.\n, • Appropriate vocational qualifications or certification in instrument maintenance.\n, • IRATA Level 1 Rope Access certification (or willing to complete if required by the platform).\n, • SBT01 – Assemble and install Small Bore Tubing training or willing to complete.\n, • SBex-Parker A Lok training or willing to complete.\n, • Previous experience in the oil and gas/petrochemical industry in a similar or equivalent role.\n, • Experience and competence with site specific instrument biased electrical competence (CIP).\n, • electrical equipment in hazardous areas (CompEx).\n, • Ex protection maintenance and inspection.\n, • authorised safeguarding systems testing.\n, • control valve & ESD valve maintenance and inspection.\n, • ESD system maintenance.\n, • basic process control systems (DCS) maintenance.\n, • control system cabling calibration.\n, • final control elements calibration and verification.\n, • PLC systems knowledge.\n, • instrument control/calibration.\n, • installation and assembly of small bore tubing.\n, • equipment installation/de-commissioning.\n, • Good awareness of work planning and scheduling.\n, • Familiarity of CMMS – Maximo or equivalent work management system.\n, • Good understanding of electrical safety rules and regulations.\n, • Good understanding and comfortable with the use of P&IDs.\n, • Performing Authority (Permit to Work system).\n, • Previous Isolating Authority experience.\n, • Gas Tester.\n, • First Aid training (including CPR).\n, • Good awareness of safe Working At Height practices\n, • In the event of an emergency, carry out duties as identified in the emergency response procedure or as directed by OIM. Personnel are required to undertake any training associated with these roles.\n, • Respected, contributory team member able to establish rapport with others.\n, • Good communicator, accurately relates information, uses active listening to ensure own understanding and is comfortable with written, spoken or electronic media.\n, • Actively demonstrates commitment to higher performance standards.\n, • Understands own roles and importance of working to objectives and standards.\n, • Understands team goals and priorities, appreciates cost implications of own actions.\n, • Understands the importance of compliance and impact of non-conformance.\n, • Has good problem solving skills, corrective action planning and follow-up.\n, • Offshore Survival (BOSIET/FOET).\n, • Offshore Medical (OGUK).\n, • Additional medical certification as required by IRATA.\n, • MIST.\n, • CompEx.\n, • Further mandatory training requirements, as per agreed training matrix.\n\n

Job descriptionService Advisor - BMW FarnboroughGood, honest, rewarding work. It's how we're built.In the heart of our aftersales department our Service Advisors are committed to delivering outstanding and trusted experiences for our customers. As a Service Advisor you are the main point of contact for all customer communication while the vehicle is undergoing maintenance and repair in our Retail Centre.As part of a successful, global automotive group, you'll broaden your experience across both sites and brands. And with the right support from us, you'll be able to progress as high as you can aim.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Warmly welcome and engage customers in a friendly and professional manner throughout the dayKeep customers informed and updated on the progress of their vehicle repairs, ensuring transparency and trustDevelop and maintain comprehensive product knowledge, enhancing expertise through manufacturer-led trainingActively promote additional services and repairs based on Technician recommendations, helping customers maintain vehicle health and increasing service revenueSchedule vehicles for appointments in the workshop efficiently and accuratelyConduct pre-appointment customer calls to confirm bookings, ensure readiness, and address any preliminary questionsMaintain precise and up-to-date customer records within our systems for effective service managementHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. Excellent communication skills, with the ability to engage effectively with customers and colleaguesDemonstrated experience in delivering exceptional customer serviceSkilled at identifying customer needs and opportunities for upsellingExcellent time management skills and the ability to work under pressurePrevious experience in a target driven role, demonstrating the ability to meet goalsMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.TPBN1_UKTJ

Job descriptionSenior Vehicle Technician (Mechanic) - BMW Farnborough£60,000 OTE (uncapped earnings)Experienced Technicians are eligible for welcome bonuses totalling £2,500*Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Vehicle Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationExperienced Level 2 qualified technicians with a dealership background are encouraged to applyThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.*Terms & Conditions; Welcome bonus is available to Level 3 qualified technicians. You will receive £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

Job descriptionCommercial Vehicle Technician (Mechanic) - Ford Farnborough£60,000 OTE (uncapped earnings)New Technicians are eligible for welcome bonuses totalling £2,500Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Commercial Vehicle Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.Terms & Conditions; £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

The Mobile Service Van Technician is required to carry out quality and safe specification, assembly and installation of hydraulic and industrial hose assemblies and associated products in various locations as directed by the company and client, which are fit for purpose to fully satisfy our customer requirements and delivery dates.Responsibilities of the RoleHSEQ (Health, Safety, Environmental and Quality)Ensure that all work is completed in line with the Companys and Customer specifications, Quality, Safety and EnvironmentalAdopting and promoting good working practices at all times and participating in continual improvement activities.Ensure that work areas/vans/equipment and tools are maintained, clean and hazard free and in accordance with company procedures and customer site rulesTo ensure that risks are assessed and risk assessments completed whereBe aware of all environmental issues associated with mobile workshop dutiesTo ensure adherence to the Companys safe driving culture for driving in public roads and customer premises.Responsible for all fines and charges for illegal parking and speedingTo ensure adherence to the Companys accident and investigation proceduresCarry out routine weekly safety inspections as per weekly van check inspection process, and report all defects to line management.Sales & MarketingGenerate revenue in order to achieve agreed monthly and annual sales budgetPromote company image at all timesPromote and use all product lines when and where applicableTo develop and maintain a good customer relationship in order to maximise company sales, product and service capabilityOperationallyEnsure an efficient response to all client callsEnsure that all tasks carried out are per company & customers written and verbal instructions.Be fully aware of component compatibility and competent to use Hydrasun productsPrepare assemblies using a variety of hoses for industrial, offshore and hydraulic and pneumatic purposesBe able to identify and use all types of hoses for the purpose specified by the customer orderBe familiar with full range of Hydrasun productsEnsure all required documentation is completed correctly and is submitted on a timely basisEnsure stock levels of mobile units are maintained and documentation is completed dailyTo take part in any Tool Box Talks and other communication processes to ensure you keep up to date with recent events or changes within the department and for the smooth running of the day to day work detail and daily planningTo actively take part in the Competency Assurance Process and ensure that you maintain an up-to-date competency level and sound working knowledge of Hydrasun product ranges and their applicationMotivate and encourage and mentor trainees where applicableParticipate in continuous improvement activities for the Mobile Service Van team in order to improve response times and services to customersA willingness to work in other areas of the business when required to doEnsure all timesheets/Job sheets are completed correctly and submitted onEnsure customers are charged for correct man-hours, fittings, materials and that this information is recorded on Job Sheet.Personal DevelopmentA willingness to participate in on-call rota system and to work extra paid hours to ensure organisational or client deadlines are met when requiredContriute to overall team activities and promote good working practices within the departmentQualifications - EssentialCurrent clean category B driving licenceQualifications - DesirableStandard grades in a technicalForklift certificate or experienceBFPA or equivalent qualifications relevant to flexible hose and/or hydraulicsExperience - EssentialAn understanding and practical experience of working with hydraulic, mechanical and pneumatic systems in an onsite service capacity. Experience - DesirablePrevious experience of hose inspection, assembly and pressure testingSkills and BehavioursGood communications skillsAbility to work under own initiativeGood organisational skillsFlexible and adaptableNumeric skillsAbility to problem solveAbility to function well within a team environmentSafety and environmental awarenessCustomer and Quality FocusBenefits Pension Plan Increase to Annual Leave with service Life Assurance Private Medical Cover Permanent Health/Income Protection Insurance Company enhanced Maternity & Paternity Pay Electric Vehicle Leasing Scheme EAP & other Health and Wellbeing programmes About us We are a leading international provider of integrated fluid transfer, power and control products to many different sectors worldwide. As part of D2Zero, Hydrasun applies experience, knowledge, and insights for a new energy future.Our core principles of engagement, accountability, communication and teamwork are cornerstones of our culture and guide us in our work. The right results stem from the right behaviours. Our people are empowered to make change happen. For the benefit of our customers, our industry, our clean energy future. Our HQ is based in Aberdeen, Scotland with operations throughout the UK and a presence in strategic locations across Europe, Asia, the Middle East, Africa, the USA and South America.Equal Employment Opportunity (EEO) statement Hydrasun is proud to be an equal opportunity employer. We are committed to diversity & inclusion and do not tolerate discrimination & harassment of any kind. In our recruitment process, all appropriately qualified applicants will be reviewed for a position based on their skills and experience. Everyone at Hydrasun is responsible for maintaining a work culture free from discrimination and harassment by treating others with respect.TPBN1_UKTJ

Gas Engineer - Worcester BoschBoiler Manufacturer PAYE roleReside AB or DD postcode (Aberdeen, Montrose, Dundee, Abroath)Do you live in the AB or DD postcode?Have a Boiler Breakdown & Fault-finding experience?Want the stability of working for a leading Boiler Manufacturer?The UK's award winning premium Boiler Manufacturer are expanding their field service team and are seeking a PAYE Gas Breakdown Engineer in the listed postcode area, to undertake servicing, fault-finding and repair on their Boilers (no system work).Why Worcester Bosch?Initial & ongoing Worcester Bosch trainingFull product supportVan with all parts & spares - restocked while you sleep!Only work on Worcester Bosch productsStart your day from homeWorking Hours:Monday to FridaySaturdays on rotaNo Sundays, No Callout, No Shifts, No Standby!Home based working in a regionAre You?Are you a self motivated Gas Engineer, Heating Engineer, Boiler Engineer organised with good customer facing skills and Boiler Breakdown/Fault-finding ability?Product training will be provided to those who possess;Previous Faultfinding or Breakdown experience (ideally 2+yrs)ACS Core & Boilers certification (CCN1 and CEN1)Able to use a multi-meterFull UK Driving Licence - requiredLive in the postcode requiredExperience of working on boilers manufacturers which may include; Worcester Bosch, Vaillant, Viessman, Baxi, Ideal Boilers, Gloworm, Potterton, Alpha Heating, etcSalary & Benefits:PAYE directly employed with the Boiler Manufacturer Worcester Bosch.Starting package of £44,684 based on;Basic salary of £42,000 + £684 Lunch Allowance + circa £2000 Company BonusCompany Van - Fully expensed with Private use option including fuelOvertime33 days holiday (25+Banks)Company Pension scheme to 8%Optional Healthcare schemeLife Assurance & sickness schemeDiscount on Bosch productsPerk Box - discounts on gym memberships, shopping, etcUniform, laptop, all specialist toolsGas Engineer, live in the listed postcode area & Interested?Please apply or reach us at Start Monday now!Experience; Gas Engineer, Heating Engineer, Gas Technician, Boiler Engineer, Worcester Bosch Engineer, Vaillant Engineer, Viessman Engineer, Baxi Engineer, British Gas Engineer, Homeserve, Ideal EngineerTPBN1_UKTJ

Instrumentation Calibration Technician / Engineer with experience of calibrating electrical / temperature / pressure, measuring instrumentation is required for a permanent position in the Aberdeen/Dyce area. Competitive salary (DoE), occasional O/T + excellent shift allowance + benefits.Are Calibration Engineer (Electrical/Instrumentation) seeking to join the world's leading calibration services company, offering flexible work options and excellent career growth opportunities?About the Role The successful Instrument Calibration Technician, day to day duties will include:To calibrate electronic / electrical measuring instruments such as pyrometry / temperature / heat / thermocouple / thermowells measuring instrumentation to NADCAP / AMS2750D requirements.Carry out pressure, flow calibrations.Documenting and inputting data / results onto computer and producing quality written documents.To follow company H&S guidelines.To be suitable for this Instrumentation Calibration Engineer role you must have the following experience:Preferably have previous experience as an Instrument calibration engineer / technician.Preferably previous experience of calibrating Temperature / Heat / Pyrometry, Thermowells, Thermocouples, Pressure and electrical.Ideally will have completed a relevant engineering apprenticeship or be time served.Must be PC literate. Must be experienced in MS Excel.Must have good interpersonal communication skills and be able to work with the minimum of supervision.The ideal Instrument Calibration Engineer will have the following experience / skills:Ideally will have completed a relevant engineering apprenticeship and or hold an equivalent engineering / technical qualification such as degree, HND, HNC, NVQ/BTEC Level 3 or above.Proven customer facing experience.Experience of using Eurotherm (advanced instrumentation equipment)Calibrating of furnace plant / electronic measuring equipment to NADCAP / AMS2750D requirements.Heat treatment plant calibration / TUS / SAT tests / using thermocouples / electronic measuring equipment.Pressure, temperature calibration experience traceable or UKAS standards.Understanding of metrology.Knowledge of importing / exporting from Excel databases and report generation from databases.Experience within the Aerospace, Automotive or Manufacturing sectors.Benefits Competitive salaryContinuous development and training plan25 days holiday and the option to buy/sell daysFlexible working optionsAccess to the Trescal PerksHubEmployee well-being programmeMedical Health Cash PlanPension and Life Assurance SchemeCycle to work schemeGym membership discountsRequirements The main accountabilitiesCalibration of Electrical measuring instrumentation to National UKAS standards.Documenting and inputting data / results into computer.Maintain the Calibration Database and filing systemMaintenance of Calibration Certification and filesAssist in the development and Improvement of Inspection and Calibration proceduresParticipate in Trescal Inter laboratory measurement auditsEnsure customer satisfaction and timely turn-around on all equipment and servicePerform other laboratory support functions as required in an efficient and orderly mannerTPBN1_UKTJ

\n HGV Technician \n Location: Aberdeen - Dyce \n Shift - Monday to Friday, 06:30hrs - 15:00hrs \n About Us: At ARR Craib Ltd, we are committed to delivering excellence in logistics and transport services. Our team is dedicated to maintaining high standards of compliance and operational efficiency. Join us and grow your career in a supportive and expanding business environment. We foster a strong culture of teamwork and continuous improvement. \n Founded in 1984 on the outskirts of Aberdeen, ARR Craib Ltd has always put our customers first. Our strong reputation for delivering reliable, efficient logistics makes us one of the leading logistics brands in Scotland. \n Job Description: Join Our Team as a Skilled Truck and Trailer Technician! Are you passionate about trucks and trailers? Do you have a knack for diagnosing and repairing electrical and mechanical faults? If so, we have the perfect opportunity for you! \n Key Responsibilities: \n \n • To ensure all vehicles are maintained to a safe and roadworthy standard in line with DVSA & Group requirements.\n, • To carry out MOT preparation on Group assets.\n, • To ensure that all inspection/service/defect paperwork is completed accurately and in a timely manner.\n, • To ensure that high quality repairs are carried out in a cost-effective manner.\n \n \n, • Keep all workshop facilities, equipment and tools clean, tidy and well maintained.\n \n \n, • To support central engineering function in identifying failure trends.\n, • To keep up to date with developments within the industry and understand changes that may impact the effective operation of the workshop.\n, • Organised and methodical approach to problem solving with attention to detail\n, • Undertake manufacturer training courses as required and ensure.\n, • To take ownership of personal development, seeking assistance & guidance from team leaders.\n, • To account for your own time, be efficient and proactive when working within the workshop.\n, • To work as part of the wider team and assist others where needed.\n \n Requirements: \n \n • Qualified up to NVQ Level 3 in Heavy Goods Maintenance or equivalent, or proven experience as an HGV Technician or in a similar vehicle maintenance role.\n, • Full UK Driving Licence.\n, • A proven background in commercial vehicle repairs.\n, • Knowledge of commercial vehicle legislation and roadworthiness standards.\n, • C or C&E driving licence is desirable, but not essential.\n, • Excellent communication skills and the ability to work effectively within a team.\n \n Why Join ARR Craib Ltd? \n \n • Competitive Salary: 40,185 per annum, based on working 40 hours per week.\n, • Shift Hours: Hours: 06:00hrs - 15:00hrs, Monday - Friday. Saturday working worked on a rota basis.\n, • Overtime: Overtime paid at hourly rate x 1.5 = 28.98 per hour. PLUS \n \n, • You will receive 10.00 per shift, when on standby rota basis.\n, • For each call out you will receive 20.00 call out charge.\n \n, • Training: Ongoing professional development through manufacturer training (Volvo, Scania, MAN, BPW, WABCO).\n \n \n, • Benefits: Additional holiday purchasing scheme, Retail discounts with Circular Benefits, Retail Trust Wellbeing Support*, and more.\n, • Career Growth: Explore opportunities for professional development within our expanding business.\n, • Company Benefits: Excellent holiday allowance. Life assurance, pension, and sickness scheme*.\n, • Extras: Christmas Savings Club, Black Circle Tyre Discount, Cycle To Work Scheme*, Free Uniform and paid Volunteer Day.\n, • Wellbeing Support: Benefit from the Retail Trust Wellbeing Support* program.\n, • Team Environment: Be part of a strong culture of teamwork and collaboration.\n \n How to Apply \n If you have the drive to be the best and want to be part of a flourishing and ambitious company, apply now! \n Please submit your application as soon as possible. Due to high volumes of applications, we reserve the right to close adverts before the closing date once we have received sufficient applications. \n Eligibility: Applicants must be eligible to work in the UK with no restrictions. Proof of Right to Work will be required at the interview stage. \n Contact Us: For any queries, please contact our Recruitment Team at . Our team is available Monday to Friday, 08:30hrs - 17:00hrs. \n Note to Recruitment Agencies: We prefer to recruit directly but have a Preferred Supplier List for when we need assistance. We'll be in touch if we need you. \n *Subject to terms and conditions. \n

Job descriptionVehicle Technician (Mechanic) - Ford Farnborough£60,000 OTE (uncapped earnings)Experienced Technicians are eligible for welcome bonuses totalling £2,500*Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Vehicle Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationExperienced Level 2 qualified technicians with a dealership background are encouraged to applyThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.*Terms & Conditions; Welcome bonus is available to Level 3 qualified technicians. You will receive £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

Job descriptionMaster Technician (Mechanic) - Ford Farnborough£60,000 OTE (uncapped earnings)New Technicians are eligible for welcome bonuses totalling £2,500*Time to switch up a gear? Be part of something better.Enjoy support that's second to none as a Master Technician (Mechanic) at Group 1 Automotive. With training at some of the best facilities in the industry, you'll learn new skills while becoming an expert. And best of all, you'll be part of a fun, friendly team that will support you every day.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWe're open to flexible working options - just askWhat you'll do day to day Perform high-quality vehicle maintenance and repairs, following manufacturer standards and guidelines to ensure reliability and safetyConduct thorough inspections of vehicle components to assess wear, damage, or required replacementsProvide expert technical advice to customers when necessary, ensuring clear and professional communicationMaintain exceptional customer service standards, fostering trust that leads to repeat business and referralsCollaborate effectively with the service reception team and workshop control for seamless workflow and customer satisfactionOffer support and guidance to fellow Technicians in the workshop, promoting teamwork and knowledge sharingHelpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. NVQ Level 3 in Light Vehicle Maintenance & Repair or equivalent qualificationThorough understanding of vehicle safety standards and guidelinesStrong problem-solving skills, ensuring accuracy in all aspects of workProven ability to meet efficiency targets while maintaining a keen eye for detailAbility to collaborate and contribute positively within a team environmentA current valid MOT licence is advantageous but not essentialMust hold a valid UK driving licenceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.*Terms & Conditions; £1,000 sign-on bonus payable after 30 days of employment, a further £500 after 90 days, and a final payment of £1000 after 6 months. Further T&C's apply.TPBN1_UKTJ

Job descriptionApprentice Vehicle Technician - Ford WokinghamLearn skills that will set you up for life.Join our fun and friendly team as an Apprentice Vehicle Technician and start earning right away while you gain your new qualifications. As the automotive industry changes and evolves, so will you - and we'll be there to support you. This is a place where you can explore new opportunities and career ambitions while learning from the best.What we can offer you Enjoy 33 days of annual leave (including bank holidays) to rest and rechargeSave money every day with our exclusive retail discountsDrive a great deal with discounts on new and used cars, plus servicing offersPlan for the years ahead with our company pension schemeBalance home and work with our industry-leading family-friendly policies designed to help you spend more time with the people that matterCommute for less with our cycle-to-work schemePrioritise your wellbeing with dedicated support for you and your family24/7 access to healthcare professionals , ensuring you get the expert advice you need quickly and easilyMake a difference with a paid day to volunteer in your communityInvest in your future with our company share purchase planEarn financial rewards when you refer a friend to join the teamKeep learning and growing with our training and development opportunities for everyone.Life assurance with the option to increase coverWhat you'll do day to day Servicing our vehicles - you'll be carrying out checks and maintenance in accordance with brand guidelines.Identifying, repairing and replacing components and parts that are faults.Liaising with our Service Advisors about required repairs or vehicle work.Maintaining repair and service records.Learn and demonstrate work bay and surrounding area tidiness.To always consider the customer impact on any activity with the vehicle, demonstrating our customer-centric approach.To satisfy the academic requirements of the apprenticeship - engage with our provider and ensure course progress.and many more!Helpful skills and qualificationsDon't worry about ticking off every single skill here - if you care about delivering great experiences as much as we do, we want to hear from you. Punctual and being great at timekeepingAbility to work well under pressureGreat team player and communication skillsDrive to exceed targetsGCSE (or equivalent) in Math's, English and ScienceWe value diversity and believe it strengthens our team. If you don't meet every requirement listed but are enthusiastic about this role and eager to learn, we encourage you to apply.Be part of something bigGroup 1 Automotive is on an exciting growth journey. We are home to over 7000 colleagues dedicated to providing exceptional customer service, with 114 dealerships in the UK, representing 21 brands at the forefront of automotive retail.But you don't need to love cars to work with us - just need to share our mission to create outstanding and trusted experiences for our customers, our partners, and our people.Our ValuesAt Group 1 Automotive we pride ourselves on our five core values that are incorporated in all we that do.Respect - Integrity - Transparency - Teamwork - ProfessionalismThese are the principles that every member of our team lives by, whether that be business functions, customer interactions, how we interact with the local community and even how we view each other in the team.TPBN1_UKTJ

Arden White Aviation & Aerospace Recruitment is working with a leading business jet organisation in Farnborough to recruit an Avionics Fitter to join their aircraft maintenance team.This is a great opportunity for someone at the early stages of their aviation career who wants to develop their skills, gain valuable hands-on experience and work on high-quality business aircraft.Whether you're an Aircraft Fitter, Junior Avionics Technician, Aviation Apprentice or have some previous aircraft maintenance experience, we'd like to hear from you.The Role Working alongside experienced aircraft maintenance professionals, you'll support the inspection, maintenance, repair and modification of aircraft systems and components.You'll receive support and guidance from experienced engineers, making this an excellent opportunity to develop your technical knowledge and build a long-term career within business aviation.Key Responsibilities Assist with aircraft inspections, maintenance, repairs and modifications.Support experienced engineers and certifying staff with aircraft maintenance activities.Complete maintenance paperwork, work orders and associated documentation.Assist with aircraft movements and ground operations.Support the identification, tagging and safe storage of aircraft components and customer equipment.Safely operate aircraft ground support equipment following approved procedures.Assist with parts requirements and recording labour against work orders.Maintain clean, organised and safe aircraft, hangar and workshop environments.Correctly use and maintain company tools and equipment.Follow all company safety, quality and maintenance procedures.Support aircraft testing and certification activities where required.Work effectively as part of a professional aircraft maintenance team.What We're Looking ForYou don't need to be a fully licensed engineer for this opportunity.We're keen to speak with candidates who have:An aviation or aircraft maintenance apprenticeship, or relevant hands-on experience.An interest in aircraft avionics, electrical systems and maintenance.Experience within an aviation, engineering or Part-145 environment is advantageous.A strong interest in developing a career within business aviation.Good attention to detail and a strong focus on safety and quality.The ability to follow technical instructions and procedures.Good communication and teamwork skills.A positive attitude and willingness to learn and develop.GCSE/GSE Grade C or above in English and Mathematics, or equivalent.Ideal BackgroundsThis role could suit candidates currently working as:Aircraft Fitter | Avionics Fitter | Junior Avionics Technician | Aircraft Maintenance Technician | Aviation Apprentice | Aircraft Maintenance Apprentice | Electrical Technician | Aerospace TechnicianWhy Apply? This is an opportunity to join an established business aviation maintenance team and build your experience working on high-value business jets.You'll be working alongside experienced aviation professionals in a structured, safety-focused environment with genuine opportunities to learn, develop and progress your career.If you've recently completed an aviation apprenticeship or have some aircraft maintenance experience and are looking for your next opportunity, we'd love to hear from you.Apply today through Arden White Aviation & Aerospace Recruitment.If you feel you have the skills to succeed in this role, please click to apply.Arden White specialises in technical engineering recruitment, and all job applications are managed by our team. We believe in the value of a personal touch, and we work hard to deliver aswift, professional, and friendly service for our clients and candidates. We are acting as a recruitment agency on behalf of our client for this vacancy, and whilst we are advertising the role, we are not the hiring company.Due to the high volume of applications, were unable to respond to everyone individually. If you havent heard from us within 14 days, unfortunately youve not been unsuccessful on this occasion. However, please continue to monitor our website vacancies for more opportunities.TPBN1_UKTJ

\n I’m working with an established, design-led practice in Aberdeen that is looking to appoint an experienced Architectural Technician or Architectural Technologist to join its collaborative team. \n \n This is a genuinely interesting opportunity for someone with at least five years of post-qualification experience who enjoys taking ownership of projects, solving technical challenges and seeing good design translated into well-delivered spaces. \n \n You’ll work across a varied portfolio of commercial, workplace and refurbishment projects, supporting schemes from the early design stages through technical development, approvals and construction. The role will involve producing accurate drawing packages, coordinating information with consultants and contractors, and ensuring projects meet the relevant technical standards, regulations and client requirements. \n \n The practice is looking for someone who can operate confidently without needing their hand held. You should be comfortable managing your own workload, communicating directly with the wider project team and identifying potential issues before they become expensive problems. That said, this isn’t an environment where you’ll be left to sink or swim. You’ll be joining an experienced, approachable team that values collaboration, shared knowledge and doing the job properly. \n \n You’ll need a recognised qualification in Architectural Technology or a closely related discipline, alongside a minimum of five years’ relevant post-qualification experience. Strong technical detailing and construction knowledge are essential, as is a solid understanding of UK Building Regulations and the Scottish planning and warrant process. Experience producing coordinated technical information using industry-standard design software will also be important. \n \n Just as importantly, you’ll be organised, dependable and straightforward to work with. The successful person will be able to balance technical accuracy with commercial awareness, communicate clearly with clients and project partners, and remain calm when programmes get busy. Experience within commercial interiors, office fit-out, refurbishment or workplace projects would be particularly useful, although candidates from other relevant architectural backgrounds will also be considered. \n \n This role would suit someone who wants more responsibility and visibility without becoming another number in a large organisation. You’ll have the opportunity to contribute ideas, influence project delivery and build strong relationships with clients, consultants and contractors. There is plenty of scope to develop your position within the team as the practice continues to grow. \n \n The role is based in Aberdeen and offers a competitive salary tailored to your experience, along with a supportive working environment and the chance to work on varied projects throughout the region. Full details on the employer, salary and benefits will be shared with suitable applicants before their details go anywhere. \n \n If you’re an Architectural Technician or Technologist with at least five years of post-qualification experience and you’re ready for a role where your technical ability will be trusted and valued, I’d be keen to speak with you. \n \n All conversations will be handled confidentially. Get in touch for an informal discussion, and I can give you an honest overview of the team, the work and what they’re looking for. \n

The Role: Electrical Technician Soldering & Wiring Understanding of electrical drawings Days based role, Monday - Friday (early finish Friday) The Person: Electrical Technician / Control Panel Wirer Ability to read electrical draw. Private Healthcare (Bupa) + Generous Holiday + Flexiti

Our client, a growing multinational manufacturer, is hiring a Quality Technician to join its production quality team. The business has a strong reputation for precision work and is looking for someone who takes that as seriously as they do. This is a hands-on inspection role sitting at the heart of the manufacturing process. You will be checking product and assemblies as they move through production, making sure everything meets the specification it was designed to. If something is not right, you are the person who catches it before it goes any further, and that responsibility sits with you from the first inspection to the last. Day to day you will be: Inspecting sub-assemblies and finished systems, covering both dimensional and electrical checks Reading engineering prints, wiring diagrams and parts lists to understand exactly what good looks like Deciding whether in process and finished assemblies meet the required standard Documenting non-conformances clearly and supporting the corrective action that follows Working alongside production and engineering on continuous improvement, not sitting apart from the shop floor To do this well you will need: Experience in a manufacturing inspection or quality assurance role, ideally somewhere electro-mechanical or similarly precise Confidence reading engineering drawings and technical documentation without needing everything explained Practical experience with dimensional measurement tools and equipment A working understanding of electrical inspection and testing methods Sharp attention to detail and the confidence to make a call on acceptance or rejection based on the standard in front of you, not the schedule Clear communication, both written and face to face with engineering and production TPBN1_UKTJ

Some jobs have you fitting the same three bolts on a line all day. This one doesn't. You'll be working across a genuine mix of electronic, electro mechanical and mechanical assembly, everything from wiring and hand soldering to cable harnessing, welding and precision fitting. If you like knowing your work has to be right first time, and you take pride in holding a tolerance rather than guessing at it, this is built for you. Our client is a well-established manufacturer, known for precision work that ends up in some genuinely demanding environments. They've built a reputation on getting the detail right, and they need someone who already knows the difference between assembling something and assembling it properly. What you'll be doing: Carrying out a variety of assembly operations on components, sub-assemblies and finished units, working to blueprint specifications throughout Determining the right method and sequence for the job in front of you, then setting up and adjusting equipment to hold tight tolerances Wiring, soldering, cable harnessing and welding as the build demands, spotting and correcting your own errors before they become someone else's problem What you'll bring: Three to five years of hands-on assembly experience in a similar environment Full working knowledge of assembly techniques and the confidence to apply it without needing instructions for routine work Comfortable in a manufacturing setting, on your feet, moving around the floor, lifting where required and following PPE requirements without being told twice You'll be trusted with new lines of work once you've proven yourself on the routine stuff, and you'll be dealing directly with colleagues across the business rather than being kept in a corner. This is a role for someone who wants ownership of their bench, not just a seat at it. TPBN1_UKTJ

Are you a Electrical Technician or Control Panel Wirer looking to join a specialist manufacturer within the Oil & Gas / Subsea sector, offering technical training and clear progression?Due to company growth, they now have a brand new position available for an Electrical Technician to join their

Mechanical Fitter / Assembler £34,000 - £36,000 + Training + Overtime + Progression + Days-Based + Excellent Company Benefits Aberdeen - Commutable from Westhill, Inverurie, Balmedie, Stonehaven, Ellon and Surrounding Areas Are you a Mechanical Fitter or an Assembly Technician, and ar

Mechanical Service Technician (Onshore) – Aberdeen Dyce, Aberdeen KBM Resourcing are recruiting for an experienced Service Technician (Onshore) to join a busy operations and workshop team in Aberdeen. Requirements * Recognised mechanical trade qualification (e. SVQ Level 3 Mechanical/Mainten

The company has been delivering high-quality fabrication and welding solutions to the oil and gas industry for over 40 years. Do you enjoy working closely with Production and Estimating teams, reviewing drawings, producing fabrication-ready information, and ensuring design data is controlled and iss

Our client based in Dyce, Aberdeen is looking for a Workshop/Production Technician to join their team for 3 months with the view to go staff.

Competitive Salary + Overtime + Career Progression.Join a Team That Keeps the UK Moving.UK’s most diverse and dynamic vehicle fleets.Now, we’re looking for a skilled and motivated.Flex-E-Rent Aberdeen workshop team.If you’re passionate about vehicles and want to work in a supportive, forward-

Our state-of-the-art High School campus (next to Ekkamai BTS) opened in August 2017 giving our students the benefit of world-class teaching and facilities. As part of the NAE family of schools, we are delighted to be able to offer some unique collaborations with world-class establishments, including

Working within the offshore ROV team and reporting to the ROV Supervisor, the Pilot Technician Grade I is expected to uphold high operational standards, contribute to a strong safety culture, and actively participate in the company’s Competence Management Scheme (CMS) as they progress toward Senio

DOF seeks skilled ROV Pilot Technicians to bolster its offshore operations.

In this offshore role, you will pilot and maintain ROVs across various projects, prioritizing safety and effective teamwork. Fugro-Geoteam AS is hiring an ROV Pilot Technician for a fixed-term contract of 12 months in Aberdeen, UK.

Boskalis Subsea Services in Aberdeen is seeking an ROV Pilot Technician Grade I to support safe subsea operations through piloting, maintenance and fault-finding of ROV systems.

Royal Mail Aberdeen Workshop is recruiting a Level 3 qualified mechanic on a permanent contract.The role offers a robust pension, training plans, PPE, and exclusive discounts for you and family.Join a large, green fleet operator and contribute to maintaining a fleet of over 49,000 vehicles, includin

OCS UK & Ireland is seeking an electrical maintenance technician to join our facilities management team.The role focuses on planned and reactive maintenance, contractor supervision and ensuring compliance with safety and quality standards.You will hold a craft qualification (City & Guilds 2350 or eq

We are looking for a pioneering ROV Pilot/Technician based in Aberdeen, to support our Autonomous Subsea Robotics (ASV) Field Service Team within Incubation. The ideal candidate will have a few years' experience, having completed a trainee ROV Pilot/Technician level of competency/certification and i