Fabrication jobs in RainhamCreate job alerts

Multi-Skilled Workshop Mechanic Location: Cranham, near Upminster, EssexPay: £18.00-£22.00 per hourWe are recruiting on behalf of our client, a well-established and respected roadside assistance and vehicle recovery company with a busy depot and workshops based in Cranham, near Upminster, Essex.Due to continued growth, they are looking for an experienced Multi-Skilled Workshop Mechanic to join their team. This is a varied, hands-on role working on an extensive range of vehicles, from pre-1960s classics through to modern cars, sports and performance vehicles, vans and light commercial vehicles.This position is ideal for someone who enjoys variety, takes pride in their workmanship, and can confidently manage their own workload while working with minimal supervision.Key Responsibilities Diagnose, service and repair a wide variety of petrol and diesel vehicles.Carry out maintenance and repairs on classic, modern, sports and performance vehicles.Rebuild and set up carburettors.Complete engine, suspension and brake repairs and rebuilds.Conduct vehicle inspections and fault diagnosis.Undertake welding and fabrication work where required.Complete servicing and preventative maintenance to a high standard.Ensure all work is carried out safely, efficiently and professionally.Requirements Proven experience as a qualified Vehicle Mechanic or Technician.Excellent mechanical knowledge across both classic and modern vehicles.Experience working on both petrol and diesel engines.Strong diagnostic and fault-finding abilities.Ability to work independently and manage your own workload.Welding experience is advantageous.A proactive approach with excellent attention to detail.Full UK driving licence preferred.What's on Offer £18.00-£22.00 per hour, depending on experience.Full-time, permanent position.Varied and interesting work on everything from classic vehicles to modern performance cars.Friendly, supportive and well-equipped workshop.Long-term opportunity with a respected local business that has built an excellent reputation in roadside assistance, recovery and vehicle repair.If you're an experienced mechanic looking for a role where no two days are the same and you enjoy working on a diverse range of vehicles, we'd love to hear from you.TPBN1_UKTJ

Fine Limit Sheet Metal WorkerCompany: Optical PrecisionPay Rate: £19.00 £20.00 / hour + excellent overtime ratesHours: Full-time, 40 hours per weekSheet Metal Worker - Why Join Us?Stability: Over 45 years of industry-leading engineering expertise.Premium Sectors: Work on high-spec Aerospace, Defence, Marine, and Nuclear projects.Modern Facility: Advanced high-speed machining, fabrication, and welding environment.Sheet Metal Worker - The PackageCompetitive Pay: Up to £20.00 per hour based on experience.Overtime: Readily available to boost your earnings.Time Off: 30 days of paid holiday (including public holidays).Perks: Company pension, onsite parking, and free refreshments.Growth: Clear pathways for personal career development.Sheet Metal Worker - The RolePrecision: Deliver fine limit sheet metal work to tight tolerances (+/- 0.010").Blueprint Reading: Plan manufacturing methods directly from complex technical drawings.Fabrication: Execute pattern development using cutting, forming, shaping, and bending.Quality Control: Work to elite OEM specifications with an uncompromising eye for detail.What We Are Looking ForProven experience in fine limit sheet metal fabrication.Ability to work confidently with aluminium, stainless steel, and plastics.Strong prototyping and production skillsTPBN1_UKTJ

Mobile Vehicle Technician - North London/ EssexDay shifts – Monday to FridayAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing:Your day starts when you start your vehicle!Day shifts – - 45 hour weekAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms.We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing:CalloutsPreventative MaintenanceEmergency BreakdownsPre-arranged servicing at rural sitesMOT PreparationEngine work and diagnostic investigationsCorrection of running defectsChassis and fabrication workHydraulics and pneumaticsImprovement of vehicle standardsElectrical and wiring inspections and correctionsYour industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required.A Class2 Licence would be beneficial.You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship.Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme.If this role isn't for you but you are looking for a move, then please get in touch.Kautec Recruitment is a fast growing automotive people business that recruits the right way.HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.A problem solver with a can-do mindsetAbiding by health and safety rulesYou will be travelling within an area of North London and EssexWe require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completionThe personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible;Reliable and punctualEnthusiastic, proactive and an innovative thinkerTPBN1_UKTJ

Precision Sheet Metal Worker\n £35,000 - £41,500 + Overtime | Full-Time | Excellent Benefits \n Are you a talented Sheet Metal Fabricator looking to join a company where quality craftsmanship is truly valued? \n Our client, a specialist engineering manufacturer, is seeking a skilled and detail-focused Precision Sheet Metal Worker to become part of their established production team. This is a fantastic opportunity to work on high-specification components, using your expertise to manufacture products to exacting standards within a modern and professional environment. The Role\n As a key member of the manufacturing team, you will be responsible for producing precision sheet metal components while maintaining exceptional quality and accuracy throughout the production process. \n Your duties will include: \n\n • Fabricating sheet metal components to fine tolerances (±0.010")\n, • Operating a range of machinery, including Fly Presses, Brake Presses and Guillotines\n, • Folding, deburring and finishing components\n, • Reading and working from detailed engineering drawings\n, • Carrying out quality checks to ensure specifications are met\n, • Contributing to a safe, efficient and productive workshop environment\nWhat's in It for You?\n\n, • Competitive salary of £35,000 - £41,500, depending on experience\n, • Regular overtime opportunities\n, • 30 days holiday, including Bank Holidays\n, • Company pension scheme\n, • Ongoing training and career progression\n, • Christmas bonus\n, • Free refreshments\n, • On-site parking\nAbout You\n To be successful in this role, you'll have: \n\n • Previous experience within sheet metal fabrication or precision engineering\n, • Confidence interpreting technical drawings\n, • A strong eye for detail and quality\n, • Experience working to tight tolerances\n, • A proactive and reliable approach to work\nReady for Your Next Opportunity?\n If you're looking to join a business that recognises technical skill, rewards commitment and offers genuine long-term career prospects, we'd love to hear from you. \n Apply today to be considered for this exciting Precision Sheet Metal Worker opportunity, offering a salary of £35,000 - £41,500 plus overtime and excellent company benefits.

Skilled Fine Limit Sheet Metal Worker \n Aerospace Fabrication \n Romford, Essex \n Permanent \n A growing aerospace manufacturer is seeking a Skilled Fine Limit Sheet Metal Worker to join its fabrication and assembly team. \n The company produces high-precision aerospace components and assemblies, working to tight dimensional and cosmetic standards. This role would suit an experienced aerospace sheet metal worker who is confident working independently on complex parts. \n Key responsibilities \n\n • Manufacture and assemble fine limit sheet metal components\n, • Work from detailed engineering drawings and technical instructions\n, • Form, bend, shape, drill, rivet and fit aerospace materials\n, • Carry out bench fitting and assembly operations\n, • Ensure work meets strict quality and traceability requirements\n, • Support continuous improvement and production efficiency activities\n\n Requirements \n\n • Proven fine limit sheet metal experience within aerospace or precision engineering\n, • Ability to interpret complex engineering drawings\n, • Experience working with aluminium, stainless steel and titanium\n, • High level of accuracy and manual dexterity\n, • Experience working to tight tolerances and cosmetic standards\n\n What’s on offer \n\n • Competitive salary\n, • Overtime available\n, • Healthcare package\n, • Modern aerospace manufacturing environment\n, • Secure long-term position with opportunities to develop further skill\n

CAD Draughtsman \n Location: Dartford, Kent Hours: Monday - Friday, 8am - 5pm Salary: £40,000 - £42,500 depending on experience Holiday: 28 Days incl. Bank Holidays Sectors: Construction, Design, Commercial Glazing, autoCAD \n Our client is a UK-based specialist contractor providing the design, manufacture, installation, and maintenance of commercial shopfronts and glazing solutions for retail and commercial clients. The company delivers a wide range of services including aluminium shopfronts, curtain walling, structural glazing, doors, shutters, glass installations, and bespoke fit-out solutions. Established as a family-run business with over 30 years of industry experience, they have built a strong reputation for delivering high-quality installations for leading retail clients across the UK. \n As a CAD Draughtsman, you'll be responsible for producing accurate 2D and 3D technical drawings, fabrication details and construction plans using CAD software, ensuring designs meet project specifications and industry standards. The role involves liaising with engineers, architects, project managers and site teams, updating drawings, managing revisions and providing technical support throughout the project lifecycle. \n Position Duties \n\n • Produce accurate 2D and 3D technical drawings using CAD software, based on project specifications and design requirements.\n, • Develop detailed fabrication, manufacturing and installation drawings for construction and engineering projects.\n, • Interpret architectural drawings, specifications, measurements and technical information to create detailed CAD designs.\n, • Amend and update drawings in line with design changes, client requirements and site conditions.\n, • Liaise with engineers, project managers, architects, clients and site teams to ensure drawings meet project requirements.\n, • Prepare detailed plans, elevations, sections, layouts and construction details.\n, • Ensure all drawings comply with relevant industry standards, building regulations and company procedures.\n, • Carry out design checks and identify potential clashes, errors or inconsistencies before drawings are issued.\n, • Maintain accurate drawing registers, revisions and document control throughout the project lifecycle.\n, • Provide technical support to manufacturing, procurement and installation teams.\n, • Attend site visits where required to take measurements, assess existing conditions and verify drawings.\n, • Work to project deadlines while managing multiple drawing packages and priorities.\n, • Incorporate feedback from clients and internal teams and issue revised drawings for approval.\n, • Support the wider design and engineering team with technical detailing and problem-solving.\n\n \n Position Requirements \n\n • Experience within a similar commercial glazing, shop front design, curtain walling and aluminium products/facades position is essential.\n, • In depth knowledge of autoCAD software, for the design of manufacturing specifications, elevation drawings and installation specifications.\n, • Ability to interpret technical drawings, understand clients requirements and update drawings throughout the process, ensuring a smooth customer journey\n, • In depth understanding of manufacturing and installation processes, to support the design stages\n, • Strong attention to detail with high level organizational skills\n, • Ability to manage multiple projects concurrently, and keep to past-paced deadlines\n, • Proactive approach to identifying, raising and resolving design issues\n, • Qualifications in relevant design or construction industries would be advantageous but not essential\n, • Ability to reliably commute to the office based in Dartford.\n\n Position Remuneration \n\n • Enjoy consistent working hours, with some flexibility available to accommodate the right candidate and support a positive work-life balance.\n, • A salary of up to £42,500 per annum is available, with the final package dependent on experience, skills and suitability for the role.\n, • Benefit from 20 days' annual leave, plus 8 bank holidays, providing a strong holiday allowance throughout the year.\n, • Access to the company pension scheme upon successful completion of the probationary period.\n, • This is a rarely available opportunity to join an established SME during an exciting period of growth, offering the chance to become a key part of the business and contribute to its continued development.\n\n \n Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application. \n \n

Aluminium Windows & Doors Fabricator \n Barking | £29,000 - £38,000 DOE | Permanent Position \n Experienced Aluminium Fabricator? Looking for your next opportunity? \n We are recruiting on behalf of a well-established and growing manufacturer in Barking who is seeking an experienced Aluminium Windows & Doors Fabricator to join their team on a permanent basis. \n This is a fantastic opportunity to join a reputable business offering excellent long-term prospects, a competitive salary, and immediate interviews for suitable candidates. \n What's on Offer? \n Permanent position Competitive salary of £29,000 - £38,000 DOE Established and growing company Immediate interviews available Excellent working environment and career prospects \n The Role \n As an Aluminium Windows & Doors Fabricator, you will be responsible for the manufacture and assembly of high-quality aluminium windows, doors, and curtain wall systems using industry-leading products and processes. \n Duties will include: \n Fabricating and assembling aluminium windows, doors, and curtain walling systems Operating and setting CNC machinery for cutting, drilling, routing, and machining aluminium profiles Working from technical drawings and specifications Fabricating using Comar and Schüco aluminium systems Carrying out quality checks to ensure products meet company standards Maintaining equipment and ensuring a safe, organised workspace \n What We're Looking For \n Previous experience as an Aluminium Windows & Doors Fabricator Experience working with Comar and/or Schüco aluminium systems Ability to read and interpret technical drawings Strong attention to detail and commitment to quality Reliable, self-motivated, and hardworking attitude \n CNC machining experience is highly desirable and will attract the higher end of the salary range. \n Don't Have CNC Experience? \n If you have experience within aluminium fabrication, window and door fabrication, curtain walling, or a similar manufacturing environment, we'd still like to hear from you. Alternative fabrication opportunities may also be available for candidates with the right background. \n Interested? Apply today to find out more!

Role Overview: \n The first point of contact for escalation of both internal and externally raised issues. Ensuring that the factory produces food that meets legislative, safety and quality standards though correct implementation of standards and customer codes of practice. Report the site KPI’s in defined meetings, driving towards improving audit scores and reducing customer complaints. Substitute for the Head of Technical. \n Coordinate all audits from a factory perspective, ensuring relevant corrective and preventative actions are put in place within the required timescales. \n Develop and maintain a robust online Quality System including Micro Standards, on Quor, that meets legal requirements and complies with customer Codes of Practice and Guidelines. \n You will be required to ensure that any expenditure within your control is in line with budgetary limits and approved by the budget holder. \n Act as a key member of the site’s internal audit programme, driving improvements and compliance. Coordinate with the Group Internal Audit manager to ensure audits are up to date and completed on time. \n Drive consistency of QA approach across shifts and actively encourage a positive, yet challenging, working relationship with the operations, hygiene and engineering teams. \n Effectively manage QA team members in a proactive manner on a daily basis. This may include but is not exhaustive to organising team meetings, undertaking performance reviews, completing team administration, managing ad hoc HR issues, recruitment and training/development activities. \n Key interactions with all internal disciplines. \n \n Key Responsibilities & Accountabilities: \n\n • Ensure the site’s quality & safety management system inc. quality manual and procedures are regularly maintained and reviewed to achieve continuous improvement.\n, • Coordinate the creation/ amendment and approval of procedures to ensure regulatory bodies/ customer requirements are interpreted, implemented, and achieved within the factory\n, • Lead the site HACCP team, ensuring food safety hazards are appropriately considered with robust control measures implemented. Ensure reviews are conducted to keep the HACCP system ‘live’ and relevant in line with NPD/ EPD, factory or equipment changes etc.\n, • Lead 3rd and 2nd party audits and visits as required e.g. BRC, EHO, customers. Ensure robust corrective and preventative actions, are logged on Quor, using RCA as appropriate, are implemented and submitted in line with timescales for external and/or internal audits to prevent reoccurrence\n, • Ensure a high standard of product safety, legality & quality assurance is maintained from goods intake through to dispatch of products via:\n\n a) Internal audits of GMP / HACCP / Hygiene / Glass & Hard Plastic/ Fabrication using Quor \n b) Effective pest control is delivered via contracted providers \n c) Product & WIP quality assessment \n d) Communication of trends and consequent actions for Technical KPIs \n e) Ingredient, environmental & product sampling & trend analysis \n Ensure QA Leads and Supervisors are trained and delivering internal/GMP/Hygiene audits. \n\n • Act as a key contact point for internal & external business customers regarding technical matters affecting product safety, legality & quality. Be the first point of escalation for any internal or external day-to-day issues\n, • Dictate and coordinate completion of factory-based actions using data provided by the technical services and laboratory teams for complaints, micro OOS and other factory related technical KPIs in order to continually drive improvement. Communicate actions and consequent results as appropriate to internal/ external customers via KPI/ Period reports or reviews\n, • Provide a cost effective & resource efficient factory technical function via:\n\n a) maintaining budgetary requirements for the factory technical department \n b) recruiting, managing, coaching & developing factory technical staff \n c) controlling structure and maintaining job descriptions \n d) implementing objectives, conducting PDPs and appraisals in line with the company’s technical strategy \n e) identifying training & development needs \n Ensure the QA teams are suitably skilled and continually developed to drive improvement within the factory environment. Conduct performance management/ disciplinarians/ other HR processes as appropriate \n\n • Ensure that all relevant legislations affecting food safety & legality are being followed on site\n, • Liaise with the NPD and Process team during product development & factory trials to ensure products can be produced to the agreed quality and safety standards. Analyse and approve microbial product shelf life, making suggestions to improve shelf life as required\n, • Liaise with factory-based teams I.e. Operations, Hygiene, Engineering, conducting regular audits/ reviews raising non-conformances on Quor, as appropriate, to challenge and drive improvement. Enable trending within the department for Non-Conformances, Concessions, GMP’s etc.\n, • Attend and contribute to internal and external forums as Food Safety and Quality subject matter expert\n, • Ensure all customer portals are updated promptly to close out actions with raised therein, e.g. site visit actions, consistency panel actions.\n, • Be directly involved with enquiries from local authorities e.g. EHOs, TSOs\n, • Effectively manage customer complaint or other technical OOS investigations from a factory perspective, liaising with the Group Technical Services team to produce investigation reports. Provide evidence/ information to facilitate corrective actions\n, • Conduct incident management for any internally or externally raised food quality, safety and legality issues, acting as a key member and deputy lead of the site’s crisis management team\n, • Manage and maintain up to date factory based technical risk assessments with focuses on foreign body, allergens, segregation inc. barrier control, and product integrity\n, • Contribute to the site’s Food safety culture plan as part of the technical management team\n, • Oversee the management and maintenance of factory-based systems e.g. packaging/ auto coding and checkweigher systems\n, • Ensure that all Health and Safety procedures are adhered to. Ensure that direct and indirect reports are trained in these procedures including risk assessments, and are made aware of the Company’s Health and Safety Policy\n\n \n Required Experience and Qualifications: \n\n • Formal qualification to HND standard or above in Food Technology or related discipline\n, • Experience in chilled food manufacturing environment, ideally ready meals\n, • Experience of dealing with major retailers\n, • Understanding of food legislation, particularly as regards legal labelling\n, • Understanding of retail COP’s relating to labelling standards and critical path (to launch) management\n, • Excellent communication skills, both written and verbal\n, • Experience in a retail customer facing role\n, • Knowledge of Quor would be beneficial but not essential\n\n \n Please note: This job description outlines the core responsibilities and duties of the role. It is not an exhaustive list, and the role may evolve over time to include additional tasks and responsibilities in line with business needs. \n

Field Service Engineer - Bespoke EquipmentAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing:Your day starts when you start your vehicle!Day shifts – no latesAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms.We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing:CalloutsPreventative MaintenanceEmergency BreakdownsPre-arranged servicing at rural sitesMOT PreparationEngine work and diagnostic investigationsCorrection of running defectsChassis and fabrication workHydraulics and pneumaticsImprovement of vehicle standardsElectrical and wiring inspections and correctionsYour industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required.A Class 2 Licence would be beneficial.You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship.Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme.If this role isn't for you but you are looking for a move, then please get in touch.Kautec Recruitment is a fast growing automotive people business that recruits the right way.HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.A problem solver with a can-do mindsetAbiding by health and safety rulesYou will be travelling within an area of North London and EssexWe require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completionThe personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible;Reliable and punctualEnthusiastic, proactive and an innovative thinkerTPBN1_UKTJ

Mechanical Fitter Architectural Fit-Out Projects Location: LondonSalary: £34,000 - £38,000 per annumJob Type: Full-Time, PermanentWe are currently recruiting an experienced Mechanical Fitter to join a specialist engineering team delivering high-quality architectural fit-out projects across London and surrounding areas. This is an excellent opportunity for a skilled Mechanical Fitter with experience in precision fitting, sheet metal work, fabrication, or bespoke installation projects to work on technically challenging environments.The successful Mechanical Fitter will be responsible for the installation and fitting of architectural components including staircases, lift interiors, escalators, balconies, and associated metalwork, ensuring all work is completed safely, accurately, and to a high standard.Key Responsibilities: Installing architectural metalwork, bespoke interiors, and specialist engineered components.Fitting stainless steel panels, sheet metal components, trims, and specialist finishes.Installing components including staircases, lift interiors, escalators, balconies, handrails, and associated fixtures.Measuring, cutting, drilling, and adjusting materials to ensure accurate installation.Reading and interpreting technical drawings, fabrication drawings, and installation plans.Using a range of hand tools and power tools to complete fitting and installation work.Ensuring all installations meet quality standards, client specifications, and project requirements.Working safely in line with site health and safety regulations.Liaising with site managers, engineers, and other trades to ensure smooth project delivery.Maintaining tools, equipment, and work areas to a high standard.Requirements: Previous experience as a Mechanical Fitter or within a similar fitting and installation role.Experience working on architectural fit-outs, metalwork installations, or bespoke engineering projects.Strong understanding of mechanical fitting, fabrication, and precision installation techniques.Ability to read and interpret technical drawings and engineering documentation.Skilled in the use of hand tools and power tools.Excellent attention to detail with the ability to work accurately to tight tolerances.Ability to work independently and as part of a wider site team.Valid CSCS Card and Safety Harness Certification.Desirable Experience: Previous experience within architectural, construction, engineering, or specialist installation environments.Experience working with stainless steel and bespoke metal finishes.First Aid qualification.EOR202N certification.Carpentry or joinery skills.This is a fantastic opportunity for a skilled Mechanical Fitter looking for a secure permanent position within a specialist engineering environment, working on unique and high-quality architectural projects across London.If you are an experienced Mechanical Fitter with a background in mechanical fitting, fabrication, or architectural installations, we would like to hear from you.TPBN1_UKTJ

About BarhaleWho are Barhale?Barhale is a business founded on family values, having been established by our Chairman, Dennis Curran, in 1980. We are one of the largest privately owned civil engineering and infrastructure specialists in the UK, with over 40 years of experience in providing design, civil engineering and maintenance services working across multiple sectors, including:WaterTransportBuilt environmentEnergyWe operate as a tier one partner for blue chip, regulated and private clients, working as part of large frameworks, joint ventures and alliances, as well as on individual standalone projects, developing long-term relationships based on delivering to the Barhale values which have been integral to our business since their inception in 1985.Our direct delivery model is at the core of everything we do, as we believe that people are our greatest asset. Therefore, we robustly source, train and retain all our own frontline delivery teams as well as management and support services. We employ over 1,200 employees nationwide.We possess a range of specialist skills to support our civil engineering and infrastructure activities, including:TunnellingMEICATemporary and permanent designSteel-fabricationSigns (design and fabrication)Health & safety equipment and products, including PPECompany Website:https://www.barhale.co.uk/Company Showcase Video:https://youtu.be/ufRG5xgM8MWhy join Barhale?As Gold Investors in People, we are committed to a high standard of people practices, creating an inclusive environment and ensuring cultural alignment to business strategy, ethos and philosophies.Job security, long-term secured work through various frameworks and large infrastructure schemesA broad range of civil engineering, mechanical and electrical schemes across some of the UKs largest infrastructure projects and clientsStrong career progression as demonstrated by our track record in promoting from within, as we believe this is a key driver of our successRole Profile: Senior Quantity SurveyorReporting to: Managing Quantity Surveyor/Commercial ManagerRole OverviewThe Senior Quantity Surveyor is an integral member of the project team, providing commercial leadership and support to project delivery teams and senior management. The role is critical in driving cost efficiency, delivering high-quality commercial analysis and ensuring effective risk and opportunity management across civil engineering projects.Role PurposeTo lead and manage the commercial performance of projects, ensuring robust cost control, accurate reporting, effective cash management and strong contractual compliance. The role actively identifies and realises commercial opportunities while protecting the business from commercial risk and supporting continuous improvement in commercial practices.Key AccountabilitiesCommercial Management & GovernanceProvide accurate and timely cost and value reporting at the project and business unit levelEnsure compliance with internal commercial processes and reporting timeframesActively seek opportunities to improve commercial procedures and controlsSupport group and business unit reporting requirementsFinancial PerformanceDeliver accurate cash flow reporting and cash managementManage cost control and project forecastingDraft and update monthly CVRs, cost plans and commercial plansCompile upstream applications for paymentEnsure expenditure and cash recovery align with business unit expectationsFocus on driving value through subcontract procurementContract & Risk ManagementManage main contract and subcontract agreements, primarily IChemE and NEC formsEnsure contracts align with corporate governance requirements, identifying and managing risks and opportunitiesLead subcontract procurement, negotiation and post-contract managementManage applications for payment through to final account settlementProtect the business from commercial and contractual riskLeadership & CapabilityShare best practices and proactively advise site teams on cost management and efficienciesSupport and guide junior commercial staffDemonstrate strong problem-solving and decision-making capabilityActively develop professional competence and commercial expertiseStakeholder ManagementLiaise with clients, client representatives and third parties on commercial mattersBuild and maintain strong supply chain relationshipsWork closely with the wider project team to manage commercial performanceAct as a trusted commercial advisor to operational teamsKey InterfacesCommercial Manager / Managing SurveyorProject Managers and Project TeamsClients and Client RepresentativesSubcontractors and Supply ChainFinance and Commercial TeamsInter-company tradingProactively optimise inter-company trading wherever possibleCollaborate effectively within the corporate group entitiesSuccess Measures (KPIs)Project margin and cash performance versus forecastAccuracy and quality of CVRs and commercial reportingEffective management of subcontract procurement and accountsIdentification and realisation of commercial opportunitiesControl and mitigation of commercial and contractual riskAbout youEssentialPrevious experience in the construction industryFamiliarity with IChemE/ NEC forms of contract and knowledge and understanding of Construction LawPrevious experience in commercial management and procurement of subcontractors, including chairing regular meetings, measurement and control cycle, certificates, and accruals calculationsDemonstrable experience in monthly forecasting and cost analysis.Excellent communication, numeric and computer literacy skills, proficient in Microsoft OfficeExemplary organisation and time management skills, with the ability to work effectively under tight deadlinesDesirableMember of RICS or other relevant professional body, or working towardsCSCS cardHND/degree (or equivalent) in Quantity SurveyingDemonstrable knowledge and experience in estimationExperience working for a direct delivery contractorAn engaging communicator with problem-solving skillsCaring and investing in youOur values have been embedded at Barhale for over 40 years, and they are our guiding principles regarding how we care and invest in people. Our values are our commitment to being a people-centric company.As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them.From the moment you join us, your well-being and career aspirations will be supported by.Competitive salaryCompany PensionLife AssurancePrivate Medical25 days of annual leave in addition to 8 public bank holidays and loyalty days8 hours volunteeringEmployee Assistance Programme to support your mental, physiological and financial wellbeingFlexible benefits via salary sacrificeCompany car/green car scheme/car allowance/Van (dependent on position)Leadership & management training and coachingRegular line management engagement and appraisal to support your career progressionDevelopment supported by internal and externally delivered trainingContinuous service awardsTPBN1UKTJ

CAD Draughtsman Location: Dartford, Kent Hours: Monday - Friday, 8am - 5pm Salary: £40,000 - £42,500 depending on experience Holiday: 28 Days incl. Bank Holidays Sectors: Construction, Design, Commercial Glazing, autoCAD Our client is a UK-based specialist contractor providing the design, manufacture, installation, and maintenance of commercial shopfronts and glazing solutions for retail and commercial clients. The company delivers a wide range of services including aluminium shopfronts, curtain walling, structural glazing, doors, shutters, glass installations, and bespoke fit-out solutions. Established as a family-run business with over 30 years of industry experience, they have built a strong reputation for delivering high-quality installations for leading retail clients across the UK. As a CAD Draughtsman, you'll be responsible for producing accurate 2D and 3D technical drawings, fabrication details and construction plans using CAD software, ensuring designs meet project specifications and industry standards. The role involves liaising with engineers, architects, project managers and site teams, updating drawings, managing revisions and providing technical support throughout the project lifecycle. Position Duties • Produce accurate 2D and 3D technical drawings using CAD software, based on project specifications and design requirements....

Mechanical Site Supervisor (Authorised Person) Contract: Inside IR35 About the Role We are looking to strengthen our Construction team with a Mechanical Site Supervisor (Authorised Person) based in Beckton. Reporting to the Senior Commissioning Manager, you will be responsible for supervising and controlling all mechanical AP site activities, ensuring work is delivered safely, efficiently, to specification, and within programme. You will play a key role in maintaining quality standards, ensuring all inspections, testing, and documentation are completed throughout the project lifecycle. Key Responsibilities Support the Site Manager in maintaining a safe working environment for employees, subcontractors, and visitors. Achieve and maintain Authorised Person (AP) status through the company's Mechanical AP assessment process. Ensure all relevant Health, Safety and Environmental documentation is received, reviewed, and maintained at the latest revision. Carry out and manage mechanical isolations in line with project requirements. Manage and maintain Mechanical Inspection & Test Plans (ITPs). Review project documentation to ensure works are fully defined and understood before execution. Review and provide feedback on Method Statements and Work Instructions. Supervise works to ensure compliance with approved procedures and specifications. Monitor and record project progress using drawings and other reporting tools. Identify, record, and manage non-conformances and improvement opportunities, ensuring corrective actions are implemented. Ensure a high-quality installation is achieved with all ITPs completed as works progress. Experience Previous experience working within the Energy, Utilities, Water, or Industrial sectors. Strong understanding of pipework fabrication, welding, and mechanical installation. Ability to assess welding quality and inspect mechanical works. Experienced in snagging and punch-listing pipelines using Isometric, GA, and P&ID drawings. Previous experience operating in an Authorised Person (AP) role. Skills & Knowledge Strong understanding of mechanical installation and commissioning processes. Knowledge of inspection, testing, and quality assurance requirements. Ability to interpret technical drawings and project documentation. Excellent communication and site supervision skills. Commitment to maintaining the highest standards of health, safety, and quality. Qualifications HNC/HND in Mechanical Engineering, or Recognised apprenticeship in pipework and welding, supported by relevant industry experience. SSSTS CSCS Card First Aid qualification Essential: Must hold current Mechanical Authorised Person (AP) status Company information At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels and this is a superb opportunity for any Site Supervisor looking for new employment. As part of putting people first, we strive to be an equal opportunities employer and we are always looking to increase the diversity of our workforce, working closely with our clients to ensure everyone is included. TPBN1_UKTJ

A leading engineering recruitment firm is seeking Fabricators to work on water treatment sites in Barking, England.The role entails the fabrication and installation of ductwork, extraction systems, and supports.Candidates must have a CSCS or CCNSG card and Thames Water Passport, along with experienc

You will work within a skilled design team on bespoke projects, delivering AutoCAD 2D drawings and fabrication drawings, with opportunities for long-term career growth.

This pivotal role ensures end-to-end production efficiency, from intake to delivery, with a focus on quality, safety, and continuous improvement across processes and teams. Lead all aspects of cut-and-bent and fabrication operations, ensuring production targets, efficiency, and safety standards are

Minimum five years' experience delivering high-end residential joinery projects. Strong understanding of bespoke joinery manufacturing, fabrication and finishing processes. Project Manager - High End Joinery Contractor £65k-£75k plus package Head Office (Kent) with Site Visits.

Skilled Fine Limit Sheet Metal Worker. If you have experience in aerospace sheet metal fabrication and take pride in delivering precision-engineered work, we would like to hear from you. Extensive experience in precision sheet metal fabrication.

Skilled Fine Limit Sheet Metal Worker Aerospace Fabrication Romford, Essex Permanent A growing aerospace manufacturer is seeking a Skilled Fine Limit Sheet Metal Worker to join its fabrication and assembly team. The company produces high-precision aerospace components and assemblies, working to tight dimensional and cosmetic standards. This role would suit an experienced aerospace sheet metal worker who is confident working independently on complex parts. Key responsibilities • Manufacture and assemble fine limit sheet metal components, • Work from detailed engineering drawings and technical instructions, • Form, bend, shape, drill, rivet and fit aerospace materials, • Carry out bench fitting and assembly operations, • Ensure work meets strict quality and traceability requirements, • Support continuous improvement and production efficiency activities Requirements • Proven fine limit sheet metal experience within aerospace or precision engineering, • Ability to interpret complex engineering drawings, • Experience working with aluminium, stainless steel and titanium, • High level of accuracy and manual dexterity, • Experience working to tight tolerances and cosmetic standards What’s on offer • Competitive salary, • Overtime available, • Healthcare package, • Modern aerospace manufacturing environment, • Secure longterm position with opportunities to develop further skills

Sheet Metal Worker (Fine Limit) Romford Full time, permanent Salary: £35,000 – £42,000 per annum About the Client Our client is a long-established aerospace precision engineering organisation specialising in the manufacture of complex, tight-tolerance components for the aerospace, defence and high-technology sectors. Operating with advanced fabrication capabilities, multi-axis machining, and specialist forming expertise, the client is recognised for delivering high-integrity components in aluminium, stainless steel, titanium and exotic alloys. Their commitment to quality, precision and continuous improvement is reflected through long-term partnerships with global aerospace primes and tier-1 suppliers. Role Overview The Skilled Fine Limit Sheet Metal Worker will be responsible for producing high-precision fabricated components using traditional, advanced, and specialist metalworking techniques. The successful candidate will work from drawings and specifications to fabricate, form, bend, assemble and finish aerospace-grade sheet metal products, often to extremely tight tolerances. This role requires significant experience in both light and fine-limit fabrication, including working with exotic materials, prototype panels and complex geometries. Key Responsibilities • Carry out bending, cutting, pressing, riveting, marking out, measuring, assembly, stretch forming, deburring and inspection to tight tolerances on aluminium, stainless steel, titanium and Inconel., • Work to detailed engineering drawings, sketches and verbal instructions., • Set and operate machinery including fly press, brake press, linisher and other metal-forming equipment., • Ensure all tools, jigs and fixtures are up to date, maintained and compliant., • Hand-form prototype panels and components using fine-limit techniques., • Execute deburring, drilling, trimming, filing, grinding and other finishing operations., • Work to aerospace quality standards and industry specifications., • Ensure components are produced to drawing requirements and customer specification., • Assist in the integration of fabricated components with machined parts. Requirements – Experience • Extensive experience in precision sheet metal fabrication and fine-limit engineering., • Strong understanding of sheet metal processes, fabrication methods and assembly techniques., • Proven experience working in the aerospace or defence sector., • Skilled in hand-forming techniques and shaping complex geometries., • Experience working with exotic metals i, • ncluding titanium and Inconel., • Competent in integrating fabricated assemblies with machined components. Requirements – Personal Attributes • Strong attention to detail and commitment to producing precision work., • Ability to follow complex drawings and technical data accurately., • Self-motivated with the ability to work independently or within a team., • Excellent problem-solving capability., • Good communication skills and a proactive approach to quality and improvement. Benefits • Healthcare contribution scheme, • Employee Assistance Programme, • 23 days holiday + bank holidays (increasing after 5 years), • Family-friendly working hours (flexibility on start/finish times + early Friday finish), • Life assurance (4× salary), • Company pension (3% contribution), • Whirlpool discount scheme, • Free on-site parking

Automatic Door Engineer – East London – Up To £21.00 Per Hour + Overtime Automatic Door Engineer Package Overview: £16.00- £21.00 Per Hour + Overtime (Negotiable depending on experience) Full-Time, Permanent Monday to Friday Hours Area Covered: East London & the Surrounding areas Company Overview – Automatic Door Engineer Our Client are currently looking for an Automatic Door Engineer to join their highly valued team on a Full-Time, Permanent basis. With many years’ experience in the industry, they’re entering another period of growth and are looking to expand their team due to customer demand. Automatic Door Engineer Role and Responsibilities: Installation, Service, Repair, Fault-finding & Maintenance of Automated Doors Field based role, covering a number of sites Working on a range of brands of manufacturer Take responsibility for the overall quality of the work delivered Carry out effective communication with customers at all times Ensure tasks are completed efficiently Providing support to team members where required Automatic Door Engineer Skills and Experience Required: A Full UK Driving Licence or equivalent (Essential) Ideally you will have at least 3 years’ experience working within the Auto Door Industry (Not essential) Considering applicants with all or single discipline providing you are willing to train Knowledge of a range of manufacturers Desirable qualifications include: IPAF, CSCS/ ECS, ADSA/ ADIA BS EN16005 and/or City & Guilds A positive attitude and the ability to self-motivate is a must Benefits of this Automatic Door Engineer position include: Competitive basic salary of up to £21.00 Per Hour (Negotiable depending on experience) Company vehicle & fuel card Plenty of overtime available if wanted Opportunity to earn more money via the on-call rota Annual leave provided Pension scheme On-going training opportunities * Travel Pay DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful. Industry Key Words: Automatic Door, Aluminium Doors, Automatic Sliding Doors, Automatic Revolving Doors, Automatic Swing Doors, Bi-Parting Doors, Telescopic Sliding Doors, Double Doors, Single Fold Doors, Rotating Doors, Fire Doors, Garage Doors, High Speed Doors, Industrial Doors, Overhead Doors, Rapid Roll Doors, Roller Shutters, Sectional Doors, Security Grilles, Security Shutters, Shop Fronts, Steel Doors, Up and Over Doors, Folding Doors, Door Servicing, Door Installations, Door Repairs, ADSA Automatic Door Suppliers Association, BS 7858, BS EN16005, IPAF, CSCS, Entrance Control, DHF, Fabrication, Fabricators, ASSA, Abloy, Record, Geze, Dorma, Stanley, Tormax, Horton, Label, Hormann, Dormakaba, Besam

CNC Programmer (5 Axis) Romford Full time, permanent Salary: £35,000 – £48,000 per annum (depending on 5-axis experience, programming capability, and aerospace background) About the Client Our client is a leading aerospace precision engineering organisation specialising in the manufacture of complex, tight-tolerance components for global aerospace and defence applications. Operating advanced multi-axis machining centres, high-specification fabrication facilities and a rigorous AS9100-accredited quality environment, the client is known for producing safety-critical components across aluminium, stainless steel, titanium and exotic materials. Their investment in cutting-edge technology—including fully automated 5-axis Matsuura machining cells—supports a culture of continuous improvement, engineering excellence, and innovation in manufacturing. Role Overview Our client is seeking an experienced CNC Milling Machinist – Programmer / Setter / Operator with strong proficiency in 5-axis machining using Matsuura MAM72-35V or MAM72-52V platforms. This is a hands-on role involving CNC programming, machine setup, optimisation of machining strategies, and high-precision production of aerospace-grade components to strict quality standards. The successful candidate will be responsible for producing components efficiently, accurately and reliably in accordance with technical drawings, customer specifications, and the company’s quality management system. Key Responsibilities • Program, set and operate 5-axis Matsuura MAM72-35V / MAM72-52V machining centres., • Create, adjust and optimise CNC programs to improve machining efficiency, cycle time and surface finish., • Select appropriate tooling, work-holding, speeds and feeds for aerospace-grade materials., • Conduct first-off inspection and support the generation of FAIR documentation where required., • Work collaboratively with engineering, production and quality teams to resolve technical issues., • Ensure machines are maintained to optimal performance levels, carrying out basic TPM and reporting issues promptly., • Interpret engineering drawings, 3D models and manufacturing documentation accurately., • Contribute to continuous improvement initiatives across machining processes., • Assist in NPI machining trials and prove-out activities for new components. Requirements – Experience • Proven experience programming, setting and operating 5-axis CNC milling machines, preferably Matsuura MAM72 series., • Experience producing high-precision components for aerospace, defence or other performance-critical sectors., • Skilled in machining aluminium, stainless steel, titanium or exotic alloys., • Strong understanding of cutting tools, machining strategies, work holding and optimisation., • Ability to interpret engineering drawings, GD&T, 3D CAD data and manufacturing specifications., • Experience performing first-off inspections using metrology tools (CMM experience beneficial). Requirements – Qualifications • Apprenticeship or formal qualification in CNC machining, mechanical engineering, aerospace engineering or similar., • CAD/CAM programming training is desirable., • Strong understanding of machining principles, GD&T and aerospace quality requirements. Requirements – Personal Characteristics • High level of attention to detail and pride in producing precision work., • Proactive problem solver with a continuous improvement mindset., • Strong communication skills across production, engineering and quality. Benefits • Healthcare contribution scheme, • Employee Assistance Programme, • 23 days holiday + bank holidays (increasing after 5 years), • Family-friendly working hours (flexibility available + early Friday finish), • Life assurance (4× salary), • On-site parking, • Discounts and employee benefits scheme

Sign Maker / Fabricator Dartford Salary £28k-£32k DOE Mon-Fri 8:00-16:00 plus overtime We're looking for a skilled motivated and willing to learn Sign Maker to assist the head Fitter for our client in Dartford. If you take pride in precision work and enjoy bringing signage to life from concept to creation - we want to hear from you! The Role: Manufacture a wide range of internal and external signage Work with materials such as wood, metal, Acrylics, LED and able to put their hand to sign making and problem solving Operation of CNC routers and lasers Assist with the creation of built-up letters, trays, and other bespoke signage Collaborate with the fitting team to ensure smooth production-to-installation workflowWhat We're Looking For: Proven experience in sign making and workshop production or similar industry Strong skills in fabrication, cutting, folding, and assembling Steel welding experience is a big plus Experience with operation of CNC routers and lasers within the signage industry is highly desirable Great attention to detail and a commitment to qualityJoin a growing company where your skills make an impact. Apply now with your CV - we'd love to see what you can bring to the team. KEY WORDS: Sign Maker, signage, signs, sign fabricator, large format, Dartford, Kent, South East London, SE London, Sign Maker, signage, signs, sign fabricator, large format, Dartford, Kent, South East London, SE London, Sign Maker, signage, signs, sign fabricator, large format, Dartford, Kent, South East London, SE London, Sign Maker, signage, signs, sign fabricator, large format, Dartford, Kent, South East London, SE London

My client specialise in creating architectural glazing with aluminium systems with high specification products from design through to installation including ongoing maintenance.are looking to recruit a fabricator who has experience in aluminium window and door manufacturing fabrication. Key Responsibilities/Accountabilities To assist in the development and documentation of fabrication processes. To help ensure QA checks on incoming, in process and outgoing materials are undertaken. To help maintain the factory environmental, health and safely compliance. To work as part of a team, working to agreed timescales and deadlines. Knowledge/Skills/Experience * Technical knowledge of manufacturing aluminium glazing windows & door industry experience Great company to work for and scope for progression

Mobile Vehicle Technician - North London/ Essex Day shifts – Monday to Friday Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts – - 45 hour week Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV’s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn’t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of North London and Essex We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker

Workshop Supervisor - Fleet Management - Late Shift The company is a national leader in providing first class transport solutions. This Workshop Manager role is critical to the smooth functioning of a busy service/ Aftersales operation Your remit will be to oversee the day-to-day activity of the workshop ensuring that Jobs are allocated via a card system to the highly trained Vehicle Engineers. Typically your workshop will be responsible for; Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections What are critical facets to the role are that you have very good people skills. You will be liaising with internal and external Stakeholders, sometime in a high pressured environment, so a cool head is required at all times, The type of vehicles worked on range from heavy goods vehicles (HGV’s), road tankers, MOD, GSE, gritters, RCV’s Refuge vehicles and road sweepers. The Fitters under your guidance are highly skilled. They will be looking after a mix of Diesel, hybrid and fully electric vehicles, it is therefore important that you are up to date with modern vehicle technologies Making sure that the work has been carried to the correct specifications and within the time frames. Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK. If you are actively looking for a new job, but are not a Technician by trade, we are still eager to hear from you and we’ll assist you in finding the next step in your career. Workshop, Depot, Site, Supervisor, Chargehand, Controller, Manager, HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter

Job Description: Looking for a role that offers work-life balance, modern facilities, and long-term career development? This could be exactly what you've been waiting for. Why Join? Competitive Salary up to £60,000 per annum 4on 4off - Nights Join a high-performing, supportive team Work in a state-of-the-art workshop with modern equipment Access to industry-recognised training (IRTEC, LOLER, BPW & more) What You'll Be Doing Carrying out routine servicing, inspections, and preventative maintenance on a large fleet of trucks and trailers Diagnosing faults using schematics and advanced diagnostic equipment Completing repairs including fabrication, welding, soldering, and component assembly Using a variety of hand tools, power tools, and specialist equipment Maintaining accurate job records and ensuring compliance with health & safety standards Supporting the wider team in resolving mechanical and electrical issues efficiently What We're Looking For Essential: Level 3 in Heavy Vehicle Maintenance or 5+ years' experience in a similar role Strong mechanical and electrical knowledge Ability to read and interpret technical diagrams and schematics A proactive approach with strong problem-solving skills Desirable: Knowledge of heavy vehicle and plant maintenance standards Class 1 (C+E) Licence and/or FLT Licence Proficient in using hand tools, power tools. Excellent communication skills and the ability to work effectively within a team. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

£260 a day Own VAN that can carry x2 doors 08:00 - 16:00 - Monday - Friday Responsibilities Install fire doors in accordance with manufacturer specifications, schematics, and building codes Measure and mark door openings for precise fitting Use hand tools and power tools to cut, shape, and assemble components Ensure all installations comply with safety standards and regulations Conduct inspections of completed work to verify proper operation and security Collaborate with other trades such as roofing, plumbing, electrical, masonry, or construction painting teams as needed Maintain a clean and organised work environment during each project phase Troubleshoot any issues related to door fitting or hardware during installation Assist in fabricating custom components when necessary for specific projects Requirements Proven experience in construction-related roles such as carpentry, fabrication, or masonry is highly desirable NVQ L2 or equivalent Proficiency with hand tools and power tools used in installation work Knowledge of schematics and technical drawings related to fire door systems Ability to read technical instructions and follow safety protocols diligently Strong organisational skills with attention to detail Physical fitness to handle lifting heavy materials and working at heights or in confined spaces Relevant construction certifications or qualifications are preferred but not mandatory This position offers an excellent opportunity for individuals committed to quality craftsmanship within the construction industry. We value safety, precision, and professionalism in all our projects. Apply today to become part of a team that values quality craftsmanship and takes pride in creating safer environments for communities

HGV Technician Location: Dagenham Salary: £55,903 per annum (£25.59 per hour) + Overtime Hours: 4 on, 4 off | Night Shift | 6:00pm - 6:00am Are you an experienced HGV Technician looking for a rewarding night shift role with excellent earning potential, outstanding benefits and long-term career development? We're recruiting for a skilled HGV Technician to join a busy workshop in Dagenham, maintaining and repairing a fleet of commercial vehicles. This is a fantastic opportunity to join a growing business that invests in its people through ongoing training, career progression and industry-recognised qualifications. What's on Offer: ·£55,903 basic salary (£25.59 per hour) ·Overtime paid at £35.55 per hour ·4 on, 4 off night shift pattern ·£1,000 Refer-a-Friend Scheme ·Retail discounts ·Cycle to Work Scheme ·Medical benefits ·Life assurance ·24/7 employee assistance programme ·Reward and recognition schemes ·Ongoing training and development The Role: ·Carry out servicing, inspections, maintenance and repairs on HGVs and trailers ·Diagnose and repair mechanical, electrical, hydraulic and electronic faults ·Prepare vehicles for MOT inspections ·Perform welding, fabrication and metalwork when required ·Order parts and assist with stores management ·Accurately complete job cards and maintenance records ·Support Apprentice Technicians and work collaboratively within the workshop ·Maintain workshop equipment to a high standard What We're Looking For: ·NVQ Level 3 in Heavy Vehicle Maintenance & Repair (or equivalent) ·Previous experience as an HGV Technician or Commercial Vehicle Technician ·Strong diagnostic and fault-finding skills ·Diagnostic qualifications desirable ·Excellent communication skills and a team-focused approach ·Commitment to delivering high-quality workmanship If you're looking for a well-paid night shift role with excellent benefits, ongoing training and genuine career progression, we'd love to hear from you. Contact Amy at Auto Skills UK quoting Reference: 54328 to find out more or apply today

Workshop Fleet Technician Vehicle Management Unit - Monday to Friday (days) Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV#s) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU

Field Service Engineer - Bespoke Equipment Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts – no lates Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV’s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class 2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn’t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of North London and Essex We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker

We are seeking for a skilled and detail-oriented Machine Operator to join our client in Erith. The ideal candidate will have a background in mechanical knowledge, and experience with various tools and machinery. This role involves operating and maintaining manufacturing equipment, ensuring quality standards, and supporting production processes. Responsibilities • Operate and monitor various manufacturing machines, • Set up machines using drawings and tooling specifications, • Programme and troubleshoot, • Perform routine maintenance, inspections, and adjustments on machinery to ensure smooth operation, • Handle materials efficiently, including loading, unloading, and moving components within the workspace, • Maintain accurate records of production output and machine performance, • Follow safety protocols diligently to ensure a safe working environment at all times, • Working in a fast-paced production environment, • Reliable and punctual with a strong work ethic, • Willingness to work either morning or afternoon shifts as required Qualifications • Proven experience in fabrication, machining, or manufacturing environments, • Basic mathematical skills for measurements and calculations during setup and operation, • Warehouse experience or familiarity with materials logistics is advantageous, • Good organisational skills with attention to detail to ensure quality standards are met Shift Monday to Friday, 6am - 2pm (flexible to switch to 2pm - 10pm once trained and if needed) Pay £14.50 whilst in training. £15.08 when fully trained This role is suitable for motivated individuals eager to contribute to a high-quality manufacturing process while expanding their technical expertise

Proman is seeking a Fabrications Designer / Estimator to join our growing aluminium manufacturing and fabrication business.

Think FE Ltd in Newcastle is seeking a Welding and Fabrication Apprenticeship Assessor/Lecturer to join its Energy Academy.

Recruit4staff are seeking a Pipefitter Welder for a workshop-based role in Skelmersdale.You will fabricate components from start to finish, performing TIG and MIG welding on ferrous and non-ferrous materials and interpreting engineering drawings.The job involves measuring, cutting, threading and qua

Rise Technical Recruitment is seeking a Design / Manufacturing Engineer (Fabrication) in Staffordshire for a leading manufacturer.

A growing engineering company in West Yorkshire is seeking a Production Manager to oversee fabrication and manufacturing operations. Candidates should have a strong background in production management and an understanding of welding and fabrication processes.

MDM Props is seeking an experienced Creative Project Manager to lead projects from enquiry through design, fabrication and installation. Based at our Greenwich workshop, this freelance role demands 8+ years in set-building or related fabrication, with strong client management and collaborative teamw

Rise Technical Recruitment Limited is seeking a Design / Estimating Engineer (Fabrication) in Staffordshire. The role focuses on design using Solidworks for fabrication, estimating for clients, and improving workflows to reduce design cycle times. The ideal candidate will have a strong fabrication b

The ideal candidate will have strong technical expertise in CNC operations and fabrication, with 3–5 years of hands-on experience.

This role entails driving sustainable growth, developing and implementing business strategies, and managing client partnerships to maximize the use of fabrication facilities. The ideal candidate will have over 5 years of experience in a similar setting, strong knowledge of the fabrication industry,

Rise Technical Recruitment is seeking a Design / Estimating Engineer (Fabrication) in Staffordshire.

MDM Props seeks an experienced Technical Project Manager to lead the fabrication and technical delivery of complex projects from concept through to finished builds at our Greenwich workshop.

The Fabrication Supervisor oversees 2nd shift (3:30pm-11:55pm) fabrication operations. Precision Custom Components (PCC) is seeking a talented Fabrication Supervisor (2ndShift) to join our team. Essential Duties of the Fabrication Supervisor:.

MDM Props is seeking a Technical Project Manager to lead the fabrication and technical delivery of complex builds in Greenwich. Based at the Greenwich workshop, this freelance role involves coordinating workshop production, fabrication planning, scheduling and installation, while ensuring safety, qu

W Talent Engineering and Manufacturing is seeking a Design Manager in South Yorkshire to lead the design function, ensuring manufacturability and timely release of product designs.You will manage a team of engineers and act as the subject matter expert across product ranges within the business.The r

A strong background in Welding and Fabrication within the energy sector. Welding and Fabrication Apprenticeship Assessor/Lecturer. Are you an experienced Welding and Fabrication professional looking to pass on your industry expertise to the next generation?.

Welding & Fabrication Tutor – West Yorkshire. We are looking for a skilled welding & fabrication tutor to join our engineering department. Deliver hands‑on welding & fabrication training in a workshop environment.